Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

Visually confirm your connection through the inspection window in the insulation of these splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

Visually confirm your connection through the inspection window.

Filled with grease, these splices resist moisture and corrosion.

These splices can withstand higher temperatures than insulated splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Make watertight connections for underground applications.

Compress the barrel twice on each end for an extra-tight grip in high-vibration applications.

Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Connect wire without stripping—these splices pierce insulation.

Push stripped wires into connectors for a reliable connection that's faster to install than twisting or crimping.

Suitable for use in tight spaces, these connectors have a narrow profile that takes up less space than standard wire splicing connectors.

Made of porcelain, these connectors can withstand temperatures up to 1200°F.

Suitable for use underground, these connectors consist of a twist-on wire connector and an abrasion- and moisture-resistant insulator tube.

Grip the wings on these connectors to increase leverage when tightening.

A plastic cover fully insulates these splices and is clear so you can visually confirm the connection.

Tap and splice multiple wires in temporarily wet environments and up to six feet underground.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

Tap a main wire or add a finished terminal to the end of a wire.

Taps connect to wires with male quick-disconnect terminals.

No crimping or wire stripping needed—this assortment includes twist-on wire connectors and insulation-piercing wire taps.

Sets include a plug and socket with wire leads already installed, so they can be quickly added to existing wiring systems. They fit standard Molex plugs and sockets.

Connectors come assembled with wire leads already installed, so they can be quickly added to existing wiring systems. Use them with AMP MATE-N-LOK connectors.

Also known as power-pole connectors, these single-pole connectors join two pin connections, rather than a pin and socket. They stack from the top and sides to form any configuration.

Connect and disconnect with the power on—spring-loaded contacts open like a switch when separating the connectors, preventing an electrical arc.

Use connectors where ignitable gas and dust may be present, such as in refineries and silos. They also prevent an electrical arc when separating mated connectors so you can safetly connect and disconnect with the power on.

These connectors meet MIL-DTL-26482, so they're compatible with other products that meet the same standard. Quickly mate by pushing them together.

When used together, connectors maintain a watertight and corrosion-resistant NEMA 4X connection.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Visually confirm your connector is working properly. A green light means your connector has power, while yellow means it has signal.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Send power and signal to devices with M12 connections that are exposed to some of the toughest industrial stresses—from welding to metal machining and changing temperatures.

Also known as dummy plugs, these plugs close the electrical circuit on your mini connector, so you can safely change devices or repair connections.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Send higher current than M5, M8, and M12 connectors near tough industrial jobs, such as welding and metal machining.

Visually check that your low-current devices with M8 connections are powered up and sending and receiving signals. These connectors illuminate green if they have power and yellow if they have signal.

Minimize signal loss between low-current devices with M8 connections.

Screw these micro M16 connectors together to securely connect equipment.

Rated IP69K, these M16 connectors protect against dust, debris, and hot, high-pressure jets of water at high volumes.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

A rubber housing protects these connectors from damage caused by drops and impact.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

A good fit for tight spaces, these are smaller than standard straight-blade plugs. Also known as NEMA midget plugs.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation and grip the wire securely. Access the wire connection by opening the hinged housing.

Use these connectors in general purpose residential and commercial applications.

Each set includes one plug and one socket. These connectors withstand moisture, harsh engine fluids, and high temperatures. Also known as weather-pack connectors.

Install these connectors in panels, enclosures, and bulkheads to join equipment with compatible Deutsch-style DC connectors.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion-resistant so they can be used in high-vibration marine environments.

Use these connectors in vehicles and other agricultural and construction equipment. They have a sealed nylon housing that resists dust and temporary submersion.

Protect your mated connections from moisture and light splashing.

A good fit for tight spaces, these connectors are also known as NEMA midget plugs. They turn to lock together when mated to prevent accidental disconnection.

Deliver power to welding cable. These connectors withstand the high temperatures and high current found in welding applications.

Choose a socket that works with your Siemens servomotor system.

A current rating up to 400 amps makes these connectors suitable for use in industrial machinery and floodlights.

One hand is all you need—just push these connectors in to secure them and charge surveillance cameras, user interfaces, and other small devices.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

Mount these receptacles to control cabinets and equipment in order to quickly connect and disconnect M29 power cords.

Power hydraulic and air-powered valves, motors, pumps, and pressure switches.

FDA compliant to safely touch food and threaded for a tight hold, these connectors won’t vibrate loose as they send high-speed data to sensors and other automated devices in food, beverage, and pharmaceutical plants.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change.

The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections.

With a single cord, these splitters join two devices with M12 connectors to a distribution block or I/O module with M12 connectors. Often used with sensors and actuators, they send signals/power to your devices through one connection.

Use these cords with hydraulic and air-powered valves, motors, pumps, and pressure switches. They have a solenoid valve socket on one end and an M12 threaded plug on the other.

Compatible with Molex connectors, these cords are sized to fit in tight spaces. They're often used in the interior of machines.

Like a tree trunk connecting to branches, these cords supply power to a chain of devices. Send power to high-amperage motors, robotic arms, and other machines in motor controls, conveyors, and sorting and packaging systems.

Attach conduit to a knockout in an outlet box or enclosure.

Slide these grommets into conduit ends to protect wire and cable from abrasion when being pulled.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Connect different sizes of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.

Also known as conduit bodies, these ports provide access to wire and cable inside PVC conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Join different sizes of conduit.