The rubber grip provides protection up to 1,000 volts AC.

The rubber grip provides protection up to 1,000 volts AC.

Dies snap in and out of this tool, so you can quickly change from crimping one electrical connector type to another.

Because you insert the wire ferrule from the front, this tool is useful in tight spaces.

Crimp open- and closed-barrel pin-and-sleeve contacts in connectors.

The ratchet applies the correct pressure to ensure a complete crimp every time.

The most crimping force we offer—these tools have a high-pressure pumping system.

The rubber grip provides protection up to 1,000 volts AC.

Insulated handles protect against shock from accidental contact with live electrical circuits. These wire strippers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Because you insert wire from the front, you can use this tool in tight spaces.

Made of aluminum-bronze that is FM approved, these wire strippers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

In addition to stripping and cutting wire, this multifunction tool has screwdrivers, a wire bender, rulers, files, and a knife that swing out from the handle.

The ratchet applies the correct pressure to ensure a complete crimp every time.

The elongated nose on this tool reaches into tight spaces.

These sets include one wire-twisting pliers, one adjustable-length wire-twisting pliers, and three spools of wire.

Extra-long handles enable access to hard-to-reach areas. Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.

Deep serrations provide the firm grip necessary for pulling rebar tie wire, and the hook-shaped handle end keeps your hand from slipping off. Also known ironworkers’ pliers, these tools also bend and cut wire.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use them to pull, bend, and cut wire.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height. Use these tools to pull, bend, and cut wire.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Use them to pull, bend, and cut wire.

Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Also known as round-nose pliers, use them for looping and bending wire.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900. Designed for looping and bending wire, they are also known as round-nose pliers.

Smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. Also known as miniature and electronics pliers, they have a round nose for looping and bending wire.

The narrow jaws fit into tight spaces, and the slip joint allows you to switch between two different jaw opening sizes.

The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These stainless steel pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Additional features, such as wire terminal crimpers and wire stripping holes, enable you to perform a variety of electrical wiring and installation work with a single tool.

Two curved openings on the jaws grip multiple sizes of round stock, tubing, and pipe.

Extra-long handles enable access in hard-to-reach areas.

Colorful plastic grips make these tools stand out, so they're less likely to be misplaced.

Made entirely of plastic, these pliers eliminate the potential for an arc flash or short circuit that can occur when using conventional insulated tools with metal components. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Made of materials that are FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

The grips drain static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

With thinner tips than standard long-nose pliers, these stainless steel tools fit into tight spaces and are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Extra-wide tips give you a better grip on your work, and smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers.

Colorful plastic grips make these assorted pliers stand out, so they’re less likely to be misplaced.

Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Lock the jaws in a vise-like grip around a workpiece and these assorted pliers stay clamped in place to leave your hands free.

You don't have to move the pivot point on these pliers—squeeze the handle and the jaws adjust to fit your workpiece.

Choose these tools when you need the gripping power of a pipe wrench with the adjustability of pliers. Slide the pivot point of the jaws to a range of positions.

Reach around closely spaced components and other obstructions.

The jaws are made of brass, which won't damage steel workpieces. These pliers are shaped to reach around closely spaced components and other obstructions.

The smallest bent-nose pliers we offer allow you to work in the smallest spaces, including under a microscope. They are shaped to reach around closely spaced components and other obstructions.

Smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers and shaped to reach around closely spaced components and other obstructions.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. Push and hold the button to adjust the jaws, and then release the button to lock them in place.

The bottom jaw is shorter than the top for a firm grip on the flats of bolt heads and nuts that have rounded corners.

A slim head and long, narrow jaws fit into tight spaces.

These stainless steel pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Squeeze the handles and the jaws automatically adjust to fit a workpiece and lock in place.

Long jaws reach workpieces in recessed areas. These pliers lock in a vise-like grip around a workpiece and stay clamped in place to leave your hands free.

Get the best possible grip on round objects, such as oil filters, connectors, and PVC pipe. Also known as cannon plug pliers, all of these pliers have curved jaws.

Handle is angled 30° to keep work in sight and hands clear of the work surface. Blades are flat on one side for close-to-the-surface cuts.

Cut thin, hard wire with these small cutters.

Made of beryllium copper that is FM approved, these cutters satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Sharpen or replace the jaws as they wear. These cutters have a double hinge that provides high cutting force with low gripping pressure.

A small grip enables one-handed cutting.

Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Also known as diagonal-cutting pliers.

These cutters are stainless steel, which provides excellent corrosion resistance.

The grips are brightly colored to stand out.

These tools divert static electricity faster than our other static-control wire cutters.

These cutters are stainless steel, which provides excellent corrosion resistance.