Filter by
Fitting Type
Attachment Type
Material
For Wire Rope Construction
Required Torque
Military Specification
Finish
Rope Capacity Adjustment Factor
Fabrication
Export Control Classification Number (ECCN)
DFARS Specialty Metals
REACH
RoHS
Required Installation Tool
Specifications Met
Application
Forged One-Piece Wire Rope Clamps—Not for Lifting
Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | Clamp | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | Lg. | Wd. | Fabrication | Required Torque, ft.-lbs. | Capacity | Specifications Met | Each | |
Zinc-Plated Steel | |||||||||
| 1/8" | 6 × 19 IWRC 7 × 19 IWRC | 29/32" | 5/8" | Forged | 35 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 000000 |
| 1/4" | 6 × 19 IWRC 7 × 19 IWRC | 1 11/32" | 1" | Forged | 145 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |
| 5/16" | 6 × 19 IWRC 7 × 19 IWRC | 1 19/32" | 1 1/4" | Forged | 225 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |
| 3/8" | 6 × 19 IWRC 7 × 19 IWRC | 1 7/8" | 1 7/16" | Forged | 325 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |