Also known as quick links, these links thread closed by hand or with a wrench.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

The twisted shape of these links prevents loads from rotating or knotting.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

Hang, pull, and secure loads. These rings are good for general non-lifting applications.

Smaller than lifting oblong links, these links provide room for snaps, carabiners, and other non-lifting connectors.

Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.

Once secured with the included locking pin, these links must be cut off to be removed.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

Meeting strict standards for lifting, yet flexible and lightweight, these shackles wrap around a variety of lifting points.

The pin doesn’t stick out from their body, so these shackles won’t snag or accidentally come undone. They have a narrow opening that restricts the movement of wire rope and chain.

A lip on the shackle keeps the pin from falling out when loosened.

The bolt on these shackles is fastened with a nut and cotter pin, making them more secure than shackles with a screw pin. Also known as D-shackles, they have a narrow opening that restricts the movement of wire rope and chain.

To prevent these shackles from snagging or accidentally coming undone, their pin doesn’t stick out from their body.

More secure than screw-pin shackles, these shackles close with a bolt that’s fastened with a nut and a cotter pin.

A lip on the shackle keeps the pin from falling out when loosened.

Minimize twisting and knotting of rope and chain.

The twisted shape of these shackles keeps rope and chain from twisting and knotting. And if their screw becomes loose, the lip on the shackles prevents it from falling out.

Secure each end with the cotter pins for temporary installations.