These clamps must be oriented with the saddle on the long (live) end and the U-bolt on the short (dead) end. They’re also known as wire rope clips.

Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.

Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

Keep multiple sleeves on hand in a variety of sizes.

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

The open-end design leaves more room for connections than other thimbles.

Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Use a new plug when installing a fitting on a different rope.

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Place the wire rope and sleeve through a hole in the assembly block and tighten into a vise to hold. Then attach the plug driver on the end of a plug to make hammering in the plug easier.

Add a stud end to wire rope without having to fray the rope or use a compression tool.

Add a clevis end to wire rope without having to fray the rope or use a compression tool.

Feed the wire rope into the opening at the bottom of these clevis-end fittings and through the body for a quick and simple installation.

Compress the thin shank wall with a hand tool to attach these light duty stud-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

The twisted shape of these links prevents loads from rotating or knotting.

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

The most secure carabiner we offer, these carabiners won’t accidentally open when rope slides because you need to unscrew the latch to unlock them.

Slide the lock down to open the latch and release it to lock these carabiners.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Attach a rope to the ring on the pin for remote release where access is limited. These shackes have a clevis end for making pivoting connections.

Meeting strict standards for lifting, yet flexible and lightweight, these shackles wrap around a variety of lifting points.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

The snap and split ring swing freely and pull from the center for easy alignment.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Lock the bolt with wire or a cable tie for a secure connection.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Slide the clevis pin into these hooks to attach chain. A latch ensures rope, chain, and fittings won't detach from the hook when the load slackens.

Weld these hooks into place to create a permanent lifting device.

These have a removable half-link to attach large rings, links, and other closed fittings.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

A ball-bearing swivel allows these hooks to rotate under load. Attach to chain by inserting the included pin through a link.

For a more secure connection than standard hooks, these hooks have a latch that locks closed when a load is lifted. A ball-bearing swivel allows them to rotate under a load.

For a more secure connection than standard hooks, the latch locks closed when a load is applied.

Screw these hooks into place and secure with the included nut.

Use these kits with hooks that doin't have a pinhole.

These hooks meet MS-87006.

Bend these S-hooks by hand to hang large and small objects from almost any surface.

These hooks have closed ends on both sides.

Use these S-hooks for lifting applications.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the eye end.

These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.

The latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Compress sleeves with less effort than standard compression tools.

Also known as seizing bands, these prevent fraying while cutting wire rope. Wrap the band around the wire rope and squeeze the flat end into the indented end.

Use these turnbuckles in lifting applications with wire rope. Their closed body not only protects threads from damage and debris, but also keeps these turnbuckles slim enough to fit in tight spaces.