Also known as quick links, these links thread closed by hand or with a wrench.

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

The twisted shape of these links prevents loads from rotating or knotting.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

Smaller than lifting oblong links, these links provide room for snaps, carabiners, and other non-lifting connectors.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.