Split Ring-to-Split Ring Miniature Ball Bearing Swivels—Not for Lifting
These have split rings that swing freely and pull from the center for easy alignment. They have good resistance to salt water and chemicals.
Eye-to-Eye Ball Bearing Swivels—Not for Lifting
Adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris. They have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
Eye | |||||
|---|---|---|---|---|---|
| Lg. | ID | Thick. | Capacity, lbs. | Each | |
316 Stainless Steel  | |||||
| 2 1/4" | 5/16" | 1/4" | 1,100 | 0000000 | 000000 |
Eye-to-Clevis Ball Bearing Swivels—Not for Lifting
Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris. They have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
Eye | Clevis | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | ID | Thick. | Inside Wd. | Pin Dia. | Capacity, lbs. | Each | |
316 Stainless Steel | |||||||
| 1 13/16" | 5/16" | 1/4" | 3/8" | 1/4" | 1,800 | 0000000 | 000000 |
Clevis-to-Clevis Ball Bearing Swivels—Not for Lifting
Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load. The bearings are permanently lubricated and sealed to keep out debris. They have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
Split Ring-to-Snap Miniature Ball Bearing Swivels—Not for Lifting
The snap and split ring swing freely and pull from the center for easy alignment. They have good resistance to salt water and chemicals.
| Lg. | Ring ID | Snap Inside Wd. | Capacity, lbs. | Bearing Material | Each | |
Nickel-Plated Brass | ||||||
|---|---|---|---|---|---|---|
| 1" | 1/8" | 1/8" | 10 | 18-8 Stainless Steel | 000000 | 00000 |
| 1 5/16" | 3/16" | 1/4" | 10 | 18-8 Stainless Steel | 000000 | 0000 |
| 1 9/16" | 1/4" | 1/4" | 30 | 18-8 Stainless Steel | 000000 | 0000 |
| 2" | 1/4" | 5/16" | 50 | 18-8 Stainless Steel | 000000 | 0000 |
| 2 5/16" | 5/16" | 7/16" | 70 | 18-8 Stainless Steel | 0000000 | 0000 |
Eye-to-Eye Swivels—Not for Lifting
Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.
Galvanized steel swivels have a thick coating for corrosion resistance.
316 stainless steel swivels have excellent resistance to salt water and chemicals.
Eye | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Thick. | Inside Length (A) | Inside Length (B) | ID | Capacity, lbs. | Fabrication | Specifications Met | Each | |
Galvanized Steel | |||||||||
| 3" | 1/4" | 3/4" | 1" | 3/4" | 800 | Forged | __ | 00000000 | 000000 |
| 3 5/8" | 5/16" | 3/4" | 1 1/4" | 1" | 1,200 | Forged | Fed. Spec. RR-C-271G | 0000000 | 00000 |
| 4 5/16" | 3/8" | 7/8" | 1 1/2" | 1 1/4" | 2,200 | Forged | Fed. Spec. RR-C-271D | 0000000 | 00000 |
| 5 3/8" | 1/2" | 1 3/16" | 2" | 1 1/2" | 3,600 | Forged | Fed. Spec. RR-C-271D | 0000000 | 00000 |
| 6 5/8" | 5/8" | 1 1/2" | 2 3/8" | 1 3/4" | 5,200 | Forged | Fed. Spec. RR-C-271D | 0000000 | 00000 |
| 7 3/8" | 3/4" | 1 5/8" | 2 5/8" | 2" | 7,000 | Forged | Fed. Spec. RR-C-271D | 0000000 | 000000 |
316 Stainless Steel | |||||||||
| 1 5/8" | 3/16" | 9/16" | 9/16" | 1/2" | 300 | Cast | __ | 0000000 | 00000 |
| 2 1/8" | 1/4" | 5/8" | 5/8" | 9/16" | 600 | Cast | __ | 0000000 | 00000 |
| 2 15/16" | 5/16" | 7/8" | 7/8" | 3/4" | 1,000 | Cast | __ | 0000000 | 00000 |
| 3 3/4" | 3/8" | 7/8" | 7/8" | 15/16" | 1,900 | Cast | __ | 0000000 | 00000 |
| 4 15/16" | 1/2" | 1 3/8" | 1 3/8" | 1 5/16" | 2,700 | Cast | __ | 0000000 | 00000 |
| 6 1/16" | 5/8" | 1 3/4" | 1 3/4" | 1 1/2" | 4,600 | Cast | __ | 0000000 | 00000 |
Clevis-to-Clevis Swivels—Not for Lifting
For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.
Hot-dipped galvanized steel swivels have a thick coating for corrosion resistance.
316 stainless steel swivels have excellent resistance to salt water and chemicals. They’re more corrosion resistant than hot-dipped galvanized steel swivels.
For technical drawings and 3-D models, click on a part number.
Clevis | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Inside Wd. | Inside Lg. | Pin Dia. | Capacity, lbs. | Fabrication | Each | |
Hot-Dipped Galvanized Steel | |||||||
| 1 7/8" | 3/8" | 3/8" | 3/16" | 450 | Forged | 00000000 | 000000 |
| 1 15/16" | 1/2" | 1/2" | 1/4" | 750 | Forged | 00000000 | 00000 |
| 2 11/16" | 11/16" | 11/16" | 5/16" | 1,200 | Forged | 00000000 | 00000 |
| 3 3/8" | 3/4" | 1" | 3/8" | 2,000 | Forged | 00000000 | 00000 |
| 4 15/32" | 1" | 1 1/4" | 1/2" | 3,500 | Forged | 00000000 | 00000 |
| 5 11/32" | 1 1/4" | 1 1/2" | 5/8" | 5,000 | Forged | 00000000 | 00000 |
| 6 1/2" | 1 5/8" | 1 3/4" | 3/4" | 7,000 | Forged | 00000000 | 000000 |
316 Stainless Steel | |||||||
| 1 5/8" | 7/16" | 3/8" | 3/16" | 300 | Cast | 00000000 | 0000 |
| 1 7/8" | 1/2" | 7/16" | 1/4" | 600 | Cast | 00000000 | 00000 |
| 2 17/32" | 5/8" | 5/8" | 5/16" | 1,100 | Cast | 00000000 | 00000 |
| 3 3/16" | 3/4" | 13/16" | 3/8" | 1,500 | Cast | 00000000 | 00000 |
| 4 5/16" | 1" | 15/16" | 1/2" | 2,600 | Cast | 00000000 | 00000 |
| 5 7/16" | 1 1/4" | 1 3/8" | 5/8" | 4,700 | Cast | 00000000 | 000000 |
| 6 7/32" | 1 1/2" | 1 1/2" | 3/4" | 7,100 | Cast | 00000000 | 000000 |
Eye-to-Clevis Swivels—Not for Lifting
These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.
Galvanized steel swivels have a thick coating for corrosion resistance.
316 stainless steel swivels have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
Eye | Clevis | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Thick. | Inside Lg. | ID | Inside Wd. | Inside Lg. | Pin Dia. | Pin Type | Capacity, lbs. | Fabrication | Specifications Met | Each | |
Galvanized Steel | ||||||||||||
| 2 7/8" | 5/16" | 3/4" | 1" | 1/2" | 13/16" | 5/16" | Cotter | 1,200 | Forged | Fed. Spec. RR-C-271G | 0000000 | 000000 |
| 3 1/2" | 3/8" | 7/8" | 1 1/4" | 5/8" | 1 1/16" | 3/8" | Cotter | 2,200 | Forged | Fed. Spec. RR-C-271G | 0000000 | 00000 |
| 4 9/16" | 1/2" | 1 1/4" | 1 1/2" | 7/8" | 1 7/16" | 1/2" | Cotter | 3,600 | Forged | Fed. Spec. RR-C-271G | 0000000 | 00000 |
| 5 1/2" | 5/8" | 1 9/16" | 1 3/4" | 1" | 1 1/2" | 5/8" | Cotter | 5,200 | Forged | Fed. Spec. RR-C-271G | 0000000 | 00000 |
| 6" | 3/4" | 1 3/4" | 2" | 1 1/8" | 1 3/4" | 3/4" | Cotter | 7,000 | Forged | Fed. Spec. RR-C-271G | 0000000 | 000000 |
316 Stainless Steel | ||||||||||||
| 2" | 1/4" | 9/16" | 5/8" | 1/2" | 7/16" | 7/32" | Screw | 600 | Cast | __ | 00000000 | 00000 |
| 2 11/16" | 5/16" | 13/16" | 13/16" | 23/32" | 5/8" | 5/16" | Screw | 1,000 | Cast | __ | 00000000 | 00000 |
| 3 5/8" | 3/8" | 1 1/16" | 15/16" | 13/16" | 15/16" | 3/8" | Screw | 1,900 | Cast | __ | 00000000 | 00000 |
| 4 5/8" | 1/2" | 1 3/8" | 1 3/16" | 15/16" | 1 1/8" | 1/2" | Screw | 2,700 | Cast | __ | 00000000 | 00000 |
| 5 3/4" | 5/8" | 1 3/4" | 1 1/2" | 1 1/4" | 1 1/2" | 5/8" | Screw | 4,600 | Cast | __ | 00000000 | 00000 |
| 6 13/16" | 3/4" | 2" | 1 5/8" | 1 23/32" | 1 11/16" | 25/32" | Screw | 5,500 | Cast | __ | 00000000 | 000000 |
Clevis-to-Clevis Ball Bearing Swivels—For Lifting
You can use these in critical applications to adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris.
Note: Swivels are for vertical lifting only.
316 stainless steel swivels have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
Clevis | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Inside Wd. | Inside Lg. | Pin Dia. | Capacity, lbs. | Specifications Met | Each | |
Alloy Steel | |||||||
| 3 11/32" | 5/16" | 15/32" | 5/16" | 1,000 | ASME B30.26 | 000000000 | 0000000 |
| 4 3/4" | 19/32" | 11/16" | 3/8" | 1,500 | ASME B30.26 | 000000000 | 000000 |
| 5 9/16" | 19/32" | 13/16" | 7/16" | 3,000 | ASME B30.26 | 000000000 | 000000 |
| 7 5/32" | 3/4" | 15/16" | 5/8" | 6,000 | ASME B30.26 | 000000000 | 000000 |
| 10 1/2" | 1" | 1 9/16" | 7/8" | 10,000 | ASME B30.26 | 000000000 | 000000 |
316 Stainless Steel | |||||||
| 4 15/16" | 19/32" | 11/16" | 3/8" | 1,500 | ASME B30.26 | 000000000 | 000000 |
| 5 29/32" | 19/32" | 13/16" | 7/16" | 3,000 | ASME B30.26 | 000000000 | 000000 |
| 7 1/2" | 3/4" | 15/16" | 5/8" | 6,000 | ASME B30.26 | 000000000 | 000000 |
| 11" | 1" | 1 9/16" | 7/8" | 10,000 | ASME B30.26 | 000000000 | 000000 |
Eye-to-Eye Ball Bearing Swivels—For Lifting
Use in critical applications to adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris.
Note: Swivels are for vertical lifting only.
For technical drawings and 3-D models, click on a part number.
Eye-to-Clevis Ball Bearing Swivels—For Lifting
Adjust the position of a fitting or an object under load and minimize twisting and knotting in critical applications. The bearings are permanently lubricated and sealed to keep out debris.
Note: Swivels are for vertical lifting only.
For technical drawings and 3-D models, click on a part number.
Eye | Clevis | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | ID | Thick. | Inside Wd. | Inside Lg. | Pin Dia. | Capacity, lbs. | Specifications Met | Each | |
Alloy Steel | |||||||||
| 3 1/8" | 1/4" | 1/4" | 5/16" | 3/8" | 5/16" | 1,000 | ASME B30.26 | 0000000 | 0000000 |
| 4 9/16" | 3/8" | 5/16" | 3/8" | 1/2" | 3/8" | 1,500 | ASME B30.26 | 0000000 | 000000 |
| 5 1/8" | 5/8" | 1/2" | 7/16" | 23/32" | 7/16" | 3,000 | ASME B30.26 | 0000000 | 000000 |
| 7 1/8" | 7/8" | 3/4" | 3/4" | 15/16" | 5/8" | 6,000 | ASME B30.26 | 0000000 | 000000 |
| 10 1/2" | 1 1/4" | 1" | 1" | 1 5/16" | 7/8" | 10,000 | ASME B30.26 | 0000000 | 000000 |
Mounting-Plate-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting
Create a wire rope railing, perimeter, or barrier. To install, mount the fitting to a wall or post, then unscrew the fitting, slide over the wire rope, and tighten the pieces together with a wrench. The plate has swivel ends. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Type | Dia. | Construction | Overall Lg. | Max. Pivot Angle | Sleeve Dia. | Number of Mounting Holes | For Screw Size | Mounting Fasteners Included | Capacity | Each | |
316 Stainless Steel | |||||||||||
| Swiveling | 5/32" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/4" | 45° | 13/32" | 3 | No. 8 | Yes | 80% of the Rope's Capacity | 000000 | 000000 |
Swivel-Hook-End Plug-Lock Wire Rope End Fittings—For Lifting
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while driving the plug into the wire rope end.
Zinc-plated steel fittings have mild corrosion resistance.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | Hook | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | Sleeve Dia. | Usable Lg. | Opening Wd. | Wd. | Fabrication | Material | Cap., lbs. | Specifications Met | Each | |
Steel | |||||||||||
| 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/4" | 6 19/32" | 1" | 9/16" | Forged | Steel | 665 | ASME B30.26 | 0000000 | 0000000 |
| 1/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 7 7/16" | 1 1/16" | 5/8" | Forged | Steel | 1,175 | ASME B30.26 | 0000000 | 000000 |
| 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/8" | 9 5/16" | 1 1/4" | 27/32" | Forged | Steel | 2,620 | ASME B30.26 | 0000000 | 000000 |
Zinc-Plated Steel | |||||||||||
| 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/4" | 6 19/32" | 1" | 9/16" | Forged | Steel | 665 | ASME B30.26 | 0000000 | 000000 |
| 1/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 7 7/16" | 1 1/16" | 5/8" | Forged | Steel | 1,175 | ASME B30.26 | 0000000 | 000000 |
| 5/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 8 1/4" | 1 1/8" | 3/4" | Forged | Steel | 1,830 | ASME B30.26 | 0000000 | 000000 |
| 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/8" | 9 5/16" | 1 1/4" | 27/32" | Forged | Steel | 2,620 | ASME B30.26 | 0000000 | 000000 |
Wire Rope with Swivel Hook—For Lifting
The swivel hook with latch installed on one end, prevents the wire rope from twisting. It is for use with winches. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Swivel-Fork-to-Swivel-Fork Retractable Lanyards—Not for Lifting
The swivel fork allows the lanyard to rotate freely.
Swivel Fork | Clear Vinyl-Plastic Coated | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Extended Lg. | Retracted Lg. | Capacity, lbs. | Lg. | Inside Wd. | For Pin Dia. | For Pin Usable Lg. | Material | Temperature Range, °F | Each | |
Galvanized Steel | ||||||||||
1/16" Dia.—7 × 7 Construction | ||||||||||
| 12" | 6" | 100 | 1 1/16" | 3/32" | 3/16" | 3/16" | 18-8 Stainless Steel | -40° to 170° | 000000000 | 000000 |
| 18" | 6 1/4" | 100 | 1 1/16" | 3/32" | 3/16" | 3/16" | 18-8 Stainless Steel | -40° to 170° | 000000000 | 00000 |
| 24" | 6 1/2" | 100 | 1 1/16" | 3/32" | 3/16" | 3/16" | 18-8 Stainless Steel | -40° to 170° | 000000000 | 00000 |
| 3ft. | 7" | 100 | 1 1/16" | 3/32" | 3/16" | 3/16" | 18-8 Stainless Steel | -40° to 170° | 000000000 | 00000 |
| 4ft. | 7 1/2" | 100 | 1 1/16" | 3/32" | 3/16" | 3/16" | 18-8 Stainless Steel | -40° to 170° | 000000000 | 00000 |
Eye-to-Swivel-Fork Lanyards—Not for Lifting
Eye | Swivel Fork | Uncoated | Clear Nylon-Plastic Coated | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Capacity, lbs. | End-to-Eye Lg. | Thick. | ID | For Screw Size | Lg. | Inside Wd. | For Pin Dia. | Each | Temperature Range, °F | Each | ||
18-8 Stainless Steel | |||||||||||||
1/16" Dia.—7 × 7 Construction | |||||||||||||
| 6" | 100 | 1" | 39/64" | 13/64" | No. 10 | 1 1/16" | 3/32" | 3/16" | 000000000 | 000000 | -40° to 200° | 000000000 | 000000 |
| 8" | 100 | 1" | 39/64" | 13/64" | No. 10 | 1 1/16" | 3/32" | 3/16" | 000000000 | 00000 | -40° to 200° | 000000000 | 00000 |
| 12" | 100 | 1" | 39/64" | 13/64" | No. 10 | 1 1/16" | 3/32" | 3/16" | 000000000 | 00000 | -40° to 200° | 000000000 | 00000 |
| 18" | 100 | 1" | 39/64" | 13/64" | No. 10 | 1 1/16" | 3/32" | 3/16" | 000000000 | 00000 | -40° to 200° | 000000000 | 00000 |
| 24" | 100 | 1" | 39/64" | 13/64" | No. 10 | 1 1/16" | 3/32" | 3/16" | 000000000 | 00000 | -40° to 200° | 000000000 | 00000 |
Closed-Body Mounting-Plate-to-Wire Rope Turnbuckles—Not for Lifting
Create a wire rope railing, perimeter, or barrier. These turnbuckles have a closed body that protects them from damage and debris and keeps them slim enough to fit in tight spaces. All are 316 stainless steel, so they have excellent resistance to chemicals and salt water.
Turnbuckles with a sleeve grip fitting have a mounting plate with swivel ends. To install, mount the turnbuckle to a wall or post. Then unscrew the fitting, slide over the wire rope, and tighten the pieces together with a wrench.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for in-line pulling only.
For technical drawings and 3-D models, click on a part number.
Mounting Plate | For Wire Rope | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Retracted Lg. | Max. Adjustment | Extended Lg. | Lg. | Wd. | Movement | Dia. | Construction | Wire Rope Fitting Type | No. of Mounting Holes | Mounting Hole Dia. | Mounting Fasteners Included | Thread Size | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||||||||
| 70% of the Rope's Capacity | 4 1/16" | 1 3/8" | 5 7/16" | 1 1/2" | 1 1/2" | 360° Swivel | 5/32" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 3 | 0.164" | Yes | 1/4"-28 | 000000 | 000000 |
| 70% of the Rope's Capacity | 6 7/8" | 2 1/2" | 9 3/8" | 2 1/8" | 5/8" | 360° Swivel | 1/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.244" | Yes | 1/4"-28 | 0000000 | 00000 |
| 70% of the Rope's Capacity | 7 3/4" | 3" | 10 3/4" | 2 13/16" | 13/16" | 360° Swivel | 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.318" | Yes | 5/16"-24 | 0000000 | 00000 |
| 70% of the Rope's Capacity | 9" | 3 7/16" | 12 7/16" | 3 1/16" | 7/8" | 360° Swivel | 1/4" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.394" | Yes | 3/8"-24 | 0000000 | 00000 |