0.032" Wire | McMaster-Carr

316/316L Stainless Steel—Dual certified to meet both 316 and 316L requirements. The low carbon content makes this stainless steel easy to weld while maintaining strength and corrosion resistance.

410 Stainless Steel—This stainless steel withstands wear caused by abrasion.

430 Stainless Steel—A good choice when both magnetism and corrosion resistance are needed.

				Container
	Dia.	Dia. Tolerance	Lg., ft.	Type	Net Wt., lb.	Fabrication	Specs. Met	Pkg. Qty.		Pkg.
304 Stainless Steel



		0.032"	-0.0005" to 0.0005"	1	Package	—	Cold Drawn	ASTM A580	50	6517K66	000000


		0.032"	-0.0005" to 0.0005"	91	Spool	1/4	Cold Drawn	ASTM A580	1	8860K14	0000
		0.032"	-0.0005" to 0.0005"	360	Can	1	Cold Drawn	ASTM A580	1	8860K63	00000
		0.032"	-0.0005" to 0.0005"	1,820	Spool	5	Cold Drawn	ASTM A580	1	8860K83	00000
		0.032"	-0.0005" to 0.0005"	3,640	Coil	10	Cold Drawn	ASTM A580	1	9070K72	000000


		316/316L Stainless Steel



				0.032"	-0.001" to 0.001"	1	Package	—	Cold Drawn	ASTM A580	25	92705K135	00000


				0.032"	-0.001" to 0.001"	30	Coil	—	Cold Drawn	ASTM A580	1	92705K134	00000
				0.032"	-0.001" to 0.001"	91	Coil	1/4	Cold Drawn	ASTM A580	1	92705K14	00000
				0.032"	-0.001" to 0.001"	364	Coil	1	Cold Drawn	ASTM A580	1	92705K22	00000


				410 Stainless Steel



						0.032"	-0.001" to 0.001"	1	Package	1/16	Cold Drawn	ASTM A580	25	6504K61	00000


						0.032"	-0.001" to 0.001"	91	Spool	1/4	Cold Drawn	ASTM A580	1	6504K41	00000
						0.032"	-0.001" to 0.001"	360	Spool	1	Cold Drawn	ASTM A580	1	6504K11	00000


						430 Stainless Steel



								0.032"	-0.001" to 0.001"	1	Package	—	Cold Drawn	ASTM A580	50	89065K81	00000


								0.032"	-0.001" to 0.001"	91	Spool	1/4	Cold Drawn	ASTM A580	1	89065K61	00000
								0.032"	-0.001" to 0.001"	360	Coil	1	Cold Drawn	ASTM A580	1	89065K21	00000
								0.032"	-0.001" to 0.001"	1,820	Coil	5	Cold Drawn	ASTM A580	1	89065K27	000000

Easy-Form Nickel Chromium Alloy

Spool

Bend this wire and it will stay in place. This nickel-chromium, often called Chromel C, provides effortless formability. Use it for heating elements, resistance windings, and hot-wire cutters.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Max. Temp., ° F	Resistance per Lg.	Heat Treatment	Tensile Strength, psi	Specs. Met	Lg., ft.		Each
1/8 lb. Spool







	Mirror Like

	0.032"	-0.0016" to 0.0016"	Cold Worked	2,100	0.663 ohm/1 ft.	Softened	100,000	ASTM B267, ASTM B344	43	8880K76	000000


	1/4 lb. Spool







					Mirror Like

					0.032"	-0.0016" to 0.0016"	Cold Worked	2,100	0.663 ohm/1 ft.	Softened	100,000	ASTM B267, ASTM B344	86	8880K17	00000


					1 lb. Spool







									Mirror Like

									0.032"	-0.0016" to 0.0016"	Cold Worked	2,100	0.663 ohm/1 ft.	Softened	100,000	ASTM B267, ASTM B344	345	8880K47	000000

Copper Wire

Highly conductive and soft enough to form, copper wire is the go-to for electrical jobs. It's often used to power motors, create grounding, and wire control panels, lights, and transformers.

Tin-Coated 110 Copper—More corrosion resistant and easier to solder than uncoated 110 copper wire.

High-Temperature Nickel-Clad 101 Copper—Stays corrosion resistant and conductive in temperatures as hot as 1200° F.

				Container
	Dia.	Dia. Tolerance	Lg., ft.	Type	Net Wt., lb.	Specs. Met		Each
110 Copper



		0.032"	-0.0004" to 0.0004"	78	Spool	1/4	ASTM B3	8873K17	00000


		0.032"	-0.0004" to 0.0004"	315	Spool	1	ASTM B3	8873K57	00000
		0.032"	-0.0004" to 0.0004"	1,575	Spool	5	ASTM B3	8873K95	000000
		0.032"	-0.0004" to 0.0004"	4,725	Spool	15	ASTM B3	8873K77	000000


		Tin-Coated 110 Copper



				0.032"	-0.0004" to 0.0004"	78	Spool	1/4	ASTM B33	8871K37	00000


				0.032"	-0.0004" to 0.0004"	315	Spool	1	ASTM B33	8871K77	00000
				0.032"	-0.0004" to 0.0004"	1,575	Spool	5	ASTM B33	8871K15	000000
				0.032"	-0.0004" to 0.0004"	4,725	Spool	15	ASTM B33	8871K97	000000


				High-Temperature Nickel-Clad 101 Copper



						0.032"	-0.0003" to 0.0003"	80	Spool	1/4	ASTM B355	1051N131	00000


						0.032"	-0.0003" to 0.0003"	320	Spool	1	ASTM B355	1051N132	000000

Aluminum Wire

Package

Spool

Bend this wire and it stays put. It’s often used for securing and bundling applications. Made of 1100 aluminum, it won’t degrade from salt water or mild chemicals, and it conducts electricity almost as well as copper.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Fabrication	Temper Designation	Specs. Met	Container Type	Pkg. Qty.		Pkg.
0.032" Diameter (-0.001" to 0.001" Tolerance)



	1	Cold Drawn	O	ASTM B211	Package	10	8904K92	00000


	265	Cold Drawn	O	ASTM B211	Spool	1	8904K31	00000
	1,075	Cold Drawn	O	ASTM B211	Spool	1	8904K81	00000
	5,380	Cold Drawn	O	ASTM B211	Spool	1	8904K49	000000

Spring-Back Stainless Steel Wire

This wire will spring back after bending. It's often used to make springs and wire rope.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Coil

PTFE Coated—This coating has a slippery surface, so it’s especially useful as a fish wire when navigating through confined spaces.

304 Stainless Steel—It is a good all-around choice for a wide range of applications.

316 Stainless Steel—One of the most corrosion-resistant types of stainless steel, 316 stands up to the harshest chemicals, including bleach, chlorine, and phosphoric acid. It's a step up from 304, which has similar strength and temperature performance. Use it in a variety of marine and chemical-processing applications.

	Dia. Tolerance	Lg.	Container Net Wt., lb.	Fabrication	Specs. Met		Each
PTFE-Coated 304 Stainless Steel



	0.032"	-0.0005" to 0.0005"	68"	—	—	ASTM A313	1749T31	000000


	316 Stainless Steel



			0.032"	-0.001" to 0.001"	91 ft.	1/4	Cold Drawn	ASTM A313	89045K34	00000


			0.032"	-0.001" to 0.001"	360 ft.	1	Cold Drawn	ASTM A313	89045K18	00000

Brass Wire

Brass wire is stronger than copper wire, plus it’s conductive and won’t degrade from water. It stays in place when bent, so it’s often used for securing and bundling.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

				Container
	Dia.	Dia. Tolerance	Lg., ft.	Type	Net Wt., lb.	Specs. Met		Each
260 Brass



		0.032"	-0.008" to 0.008"	83	Spool	1/4	ASTM B134	8864K83	000000


		0.032"	-0.008" to 0.008"	335	Spool	1	ASTM B134	8864K73	00000

Multipurpose 400 Nickel Wire

Spool

Bend this wire and it will stay in place. It is often used as safety lock wire. From marine hardware to chemical-processing equipment, 400 nickel is widely used for its strength, weldability, and formability. Comparable to Monel, this nickel-copper alloy will stand up to highly corrosive environments, such as those involving salt water, sulfuric acid, and alkalies.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

							1/4 lb. Spool		1 lb. Spool
	Dia.	Dia. Tolerance	Max. Temp., ° F	Heat Treatment	Tensile Strength, psi	Specs. Met		Each		Each
Matte



		0.032"	-0.001" to 0.001"	700	Annealed	70,000	ASTM B164	8905K31	000000	8905K56	0000000

High-Temperature 600 Nickel Wire


Spool	Can

Bend this wire and it will stay in place. Able to withstand temperatures up to 1000° F, 600 nickel is often used as safety lock wire in high-temperature applications. It is comparable to Inconel 600.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

						1/4 lb. Spool		1 lb. Can
	Dia.	Dia. Tolerance	Heat Treatment	Tensile Strength, psi	Specs. Met		Each		Each
Matte



		0.032"	-0.0006" to 0.0006"	Annealed	80,000	ASTM B166	90345K19	000000	90345K39	000000

Bronze Wire

Formed into cotter pins and springs, bronze wire withstands repeated motion better than copper and brass wire. It's 510 bronze, so it contains phosphor for high strength and copper for formability. Also known as phosphor bronze.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

				Container
	Dia.	Dia. Tolerance	Lg., ft.	Type	Net Wt., lb.	Specs. Met		Each
510 Bronze



		0.032"	-0.001" to 0.001"	81	Coil	1/4	ASTM B159	9668K51	000000


		0.032"	-0.001" to 0.001"	320	Coil	1	ASTM B159	9668K64	00000

Corrosion-Resistant Tungsten

The addition of copper and nickel makes this tungsten more corrosion resistant than tungsten carbide.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Wire

Coil

This wire will spring back after bending. It's often used in heating and electrical applications.

									1/16 lb. Container Net Weight			1/8 lb. Container Net Weight
	Dia.	Dia. Tolerance	Max. Temp., ° F	Container Type	Temper Rating	Heat Treatment	Tensile Strength	Specs. Met	Lg., ft.		Each	Lg., ft.		Each
Matte



		0.032"	-0.00048" to 0.00048"	5,000	Coil	Spring	Hardened	Not Rated	ASTM F288	9	3775K43	000000	18	3775K31	0000000

Extra-Flexible Wire Rope

7 × 19 Strand Core

Wire Rope

Wind this wire rope onto a winch or drum to pull and tow vehicles, trailers, and more. It contains more than twice as many individual wires as standard wire rope to bend easily without wear. All rope is manufactured in the U.S.

Warning: Not for overhead lifting.

18-8 Stainless Steel—With solid stainless steel construction, this wire rope has no plating that could wear away. It resists rust, but it won't hold up to the harsh chemicals that 316 stainless steel can.

Wire Rope Construction—Strand cores are more crush and impact-resistant than fiber cores, but fiber core ropes bend more easily and absorb shock.

	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Preformed	Choose a Length, ft.		Per Ft.
18-8 Stainless Steel



	0.032"	20	7 × 19 Strand Core	13/16"	No	5, 10, 25, 50, 100	3461T293	00000

Extra-Flexible Coated Wire Rope

Pull and tow loads without marring nearby surfaces. With more than twice as many individual wires as standard options, this wire rope is easier to bend and wind onto winches and drums without wear. The plastic coating protects the inner wires from corrosion and damage, while shielding nearby objects from scratches. All rope is manufactured in the U.S.

Warning: Not for overhead lifting.

FEP Coating—Our most chemical-resistant coating stands up to the harshest acids and bases.

Nylon Coating—Resists abrasion better than other coatings. It also stands up to mild chemicals, but will swell if exposed to moisture.

Wire Rope Construction—Strand core rope is crush and impact-resistant.

	Dia. with Coating	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Preformed	Coating Color	Choose a Length, ft.		Per Ft.
18-8 Stainless Steel with Nylon Coating



	0.032"	0.037"	20	7 × 19 Strand Core	13/16"	No	Clear	5, 10, 25, 50, 100	8930T53	00000


	18-8 Stainless Steel with FEP Coating



			0.032"	0.04"	20	7 × 19 Strand Core	13/16"	No	Clear	5, 10, 25, 50, 100	3423T25	0000

Undersized Hardened Multipurpose M2 High-Speed Tool Steel Rods

These rods, also known as drill blanks, have an undersized diameter for machining your own drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia.	Dia. Tolerance	Drill Bit Size	Lg.	Yield Strength	Hardness	Mechanical Finish		Each
0.032"	-0.0002" to 0"	67 Ga.	1 3/8"	Not Rated	Rockwell C60 (Extra Hard)	Precision Ground	3009A284	00000

Wire Rope

7 × 7 Strand Core

The most common wire rope for hanging fixtures, tethering equipment, and constructing barriers. It balances flexibility and abrasion resistance —you can bend it if needed, but it has fewer wires that could break over time, so it lasts longer.

Warning: Not for overhead lifting.

Wire Rope Construction—Strand cores are more crush and impact-resistant than hollow cores. However, you can run electrical wiring or fluid conduit through hollow core ropes.

Preformed—With each wire shaped into a spiral before being twisted onto the rope, they maintain their shape when cut. This keeps them from unraveling or poking equipment and users.

	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Preformed	Choose a Length, ft.		Per Ft.
18-8 Stainless Steel



	0.032"	20	7 × 7 Strand Core	1 3/8"	Yes	10, 25, 50, 100, 300	3461T08	00000

Oversized Hardened Multipurpose M2 High-Speed Tool Steel Rods

Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia.	Dia. Tolerance	Reamer Size	Lg.	Fabrication	Yield Strength	Hardness	Mechanical Finish		Each
0.032"	0" to 0.0002"	67 Ga.	1 3/8"	Hot Rolled	Not Rated	Rockwell C60 (Extra Hard)	Precision Ground	3023A384	00000

Ultra-High-Temperature Niobium Wire

This niobium wire has a higher melting point than most other metal, so it’s also known as refractory metal. It's highly conductive, corrosion resistant, and maintains its strength even at high temperatures. At low temperatures, it becomes a superconductor. This wire holds up in a variety of tough conditions including jet engines, pipelines, and semiconductor manufacturing.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

				50 ft. Long
Dia.	Dia. Tolerance	Melting Point Temp., ° F	Hardness		Each
0.032"	-0.001" to 0.001"	4,470	Rockwell B70 (Medium)	6011N12	0000000

Coated Wire Rope

3 × 7 Hollow Core

7 × 7 Strand Core

Hang fixtures and tether equipment without scratching hooks and other nearby objects. The plastic coating on this wire rope prevents abrasion while further protecting the inner wires from corrosion and damage. All rope is manufactured in the U.S.

Warning: Not for overhead lifting.

FEP Coating—Our most chemical-resistant coating stands up to the harshest acids and bases.

Nylon Coating—Resists abrasion better than other coatings. It also stands up to mild chemicals, but will swell if exposed to moisture.

Wire Rope Construction—Strand cores are more crush and impact-resistant than hollow cores. However, you can run electrical wiring or fluid conduit through hollow core ropes.

Preformed—With each wire shaped into a spiral before being twisted onto the rope, they maintain their shape when cut. This keeps them from unraveling or poking equipment and users.

	Dia. with Coating	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Preformed	Coating Color	Choose a Length, ft.		Per Ft.
18-8 Stainless Steel with Nylon Coating



	0.032"	0.037"	20	3 × 7 Hollow Core	1 5/8"	Yes	Clear	25, 50, 100, 300, 500	8930T52	00000


	0.032"	0.037"	20	7 × 7 Strand Core	1 3/8"	Yes	Clear	10, 25, 50, 100, 300	8930T26	0000


	18-8 Stainless Steel with FEP Coating



			0.032"	0.04"	20	7 × 7 Strand Core	1 3/8"	Yes	Clear	10, 25, 50, 100, 300	3423T24	0000

Rosin Flux-Core Solder for Electronics and Electrical Applications

Rosin flux is quick acting with strong cleaning action, but it leaves residue that requires flux remover. This solder is electrically conductive, so it’s good for electronics and electronic applications.

Leaded, Flux Core

		Material Composition
	Solder Alloy	Tin	Lead	Melting Temp., ° F	Dia.	Wt., lb.		Each
For Joining Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel



		Sn50Pb50	50%	50%	420	0.032"	1	7659A111	000000

Lead-Free, Flux Core

Lead-free solder is safer to use than leaded solder and helps meet industry regulations.

		Material Composition
	Solder Alloy	Tin	Copper	Lead	Melting Temp., ° F	Dia.	Wt., lb.		Each
For Joining Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel



		Sn99.3Cu0.7	99.3%	0.7%	0%	440	0.032"	1	7872A115	000000

Extra-Flexible Low-Stretch Coated Wire Rope

A flexible option that maintains precise tension. This wire rope is stretched out during manufacturing so it won't elongate further under load. It also has more than twice as many individual wires as standard options to bend easily around winches and drums. Use it around small pulleys and in cable-driven systems where extra stretch could affect how they move. The plastic coating protects the inner wires and keeps them from scratching nearby objects.

Warning: Not for overhead lifting.

Nylon Coating—Resists abrasion better than other coatings. It also stands up to mild chemicals, but will swell if exposed to moisture.

Wire Rope Construction—Strand core rope is crush and impact-resistant.

	Dia. with Coating	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Coating Color	Preformed	Choose a Length, ft.		Per Ft.
18-8 Stainless Steel with Nylon Coating



	0.032"	0.037"	20	7 × 19 Strand Core	13/16"	Gray	No	5, 10, 25, 50, 100	34235T27	00000

Low-Stretch Coated Wire Rope

This wire rope won't stretch out under load. Stretched during manufacturing, it maintains a precise, consistent amount of tension without elongating during use. Use it in cable-driven systems to avoid extra stretch that could affect how they move. The plastic coating protects the inner wires and keeps them from scratching nearby objects.

Warning: Not for overhead lifting.

Nylon Coating—Resists abrasion better than other coatings. It also stands up to mild chemicals, but will swell if exposed to moisture.

Wire Rope Construction—Strand core rope is crush and impact-resistant.

	Dia. with Coating	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Coating Color	Preformed	Choose a Length, ft.		Per Ft.
18-8 Stainless Steel with Nylon Coating



	0.032"	0.037"	20	7 × 7 Strand Core	1 3/8"	Gray	No	10, 25, 50, 100, 300	34235T23	00000

Quick-Flow No-Clean Flux-Core Solder for Electronics and Electrical Applications

The five flux cores in this solder allow fast soldering that uses solder efficiently and reduces the heat to your joint. The flux it’s filled with leaves minimal residue so there’s no cleanup. This solder is electrically conductive, making it good for electronics and electrical applications.

Leaded, Flux Core

Image of Product. Front orientation. Contains Inset. Solder. Quick-Flow No-Clean Flux-Core Solder for Electronics and Electrical Applications.

		Material Composition							1 lb.
	Solder Alloy	Tin	Silver	Antimony	Copper	Lead	Dia.	Melting Temp., ° F		Each
For Joining Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel



		Sn60Pb40	60%	0%	0%	0%	40%	0.032"	365	4879N14	000000


		Sn63Pb37	63%	0%	0%	0%	37%	0.032"	365	4879N24	00000

Lead-Free, Flux Core

Lead-free solder is safer to use than leaded solder and helps meet industry regulations.

		Material Composition							1 lb.
	Solder Alloy	Tin	Silver	Antimony	Copper	Lead	Dia.	Melting Temp., ° F		Each
For Joining Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel



		Sn96.5Ag3Cu0.5	96.5%	3%	0%	0.5%	0%	0.032"	425	4879N33	0000000


		Sn96Ag4	96%	4%	0%	0%	0%	0.032"	430	4879N37	000000
		Sn97Ag3	97%	3%	0%	0%	0%	0.032"	430	4879N41	00000

Quick-Flow Easy-Clean Flux-Core Solder for Electronics and Electrical Applications

Electrically conductive and with five flux cores, this solder speeds up the process of soldering electronics, so you use less solder and transmit less heat to the joint. Easily wash away the flux residue with just water.

Leaded, Flux Core

		Material Composition				1 lb.
	Solder Alloy	Tin	Lead	Dia.	Melting Temp., ° F		Each
For Joining Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel



		Sn60Pb40	60%	40%	0.032"	365	4873N12	000000


		Sn63Pb37	63%	37%	0.032"	365	4873N17	00000

Quick-Flow Rosin Flux-Core Solder for Electronics and Electrical Applications

The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint. Rosin flux is quick acting with strong cleaning action but leaves residue that requires flux remover. Since this solder is electrically conductive, it’s good for electronics and electrical applications.

Leaded, Flux Core

		Material Composition					1 lb.
	Solder Alloy	Tin	Silver	Lead	Dia.	Melting Temp., ° F		Each
For Joining Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel



		Sn60Pb40	60%	—	40%	0.032"	375	7744A6	000000


		Sn62Pb36Ag2	62%	2%	36%	0.032"	460	7687A15	000000
		Sn63Pb37	63%	—	37%	0.032"	365	7687A18	00000

Lead-Free, Flux Core

Lead-free solder is safer to use than leaded solder and helps meet industry regulations.

		Material Composition						1 lb.
	Solder Alloy	Tin	Silver	Copper	Lead	Dia.	Melting Temp., ° F		Each
For Joining Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel



		Sn96.5Ag3Cu0.5	96.5%	3%	0.5%	0%	0.032"	460	7687A23	0000000


		Sn96Ag4	96%	4%	—	0%	0.032"	470	6985N11	000000
		Sn97Cu3	97%	—	3%	0%	0.032"	445	6985N15	00000

Solder for Stainless Steel

Without a flux core, this solder allows you to choose the flux that works best for your application.

Leaded, Flux Required

		Material Composition					1 lb.
	Solder Alloy	Tin	Silver	Lead	Dia.	Melting Temp., ° F		Each
For Joining Stainless Steel



		Pb54Sn45Ag1	45%	1%	54%	0.032"	410	5275N11	000000

Rosin Flux-Core High-Melting-Point Solder for Electronics and Electrical Applications

Image of Product. Front orientation. Contains Inset. Solder. Rosin Flux-Core High-Melting-Point Solder for Electronics and Electrical Applications.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover. The high melting point of this solder prevents remelting when soldering successive joints with another solder. It is electrically conductive.

Leaded, Flux Core

		Material Composition					1 lb.
	Solder Alloy	Tin	Silver	Lead	Dia.	Melting Temp., ° F		Each
For Joining Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel



		Pb93Sn5Ag2	5%	2%	93%	0.032"	535	7685A21	000000

Solder

Use this solder for general purpose applications. It does not have a flux core, so you can choose the flux that works best for your application.

Leaded, Flux Required

		Material Composition				1 lb.		5 lb.
	Solder Alloy	Tin	Lead	Dia.	Melting Temp., ° F		Each		Each
For Joining Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel



		Sn50Pb50	50%	50%	0.032"	420	7667A71	000000	7667A72	0000000

Solder for Electronics and Electrical Applications

Electrically conductive, this solder is best for electronics and electronics applications. It does not have a flux core, so you can choose the flux that works best for your application.

Lead-Free, Flux Required

Lead-free solder is safer to use than leaded solder and helps meet industry regulations.

		Material Composition						1 lb.
	Solder Alloy	Tin	Silver	Copper	Lead	Dia.	Melting Temp., ° F		Each
For Joining Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel



		Sn96.5Ag3Cu0.5	96.5%	3%	0.5%	0%	0.032"	420	7872A22	0000000


		Sn99.3Cu0.7	99.3%	—	0.7%	0%	0.032"	440	7827A23	00000