7/32" Wire | McMaster-Carr

	For Thread Size	For Screw Size	For Dia.	For Drill Bit Size	Wd.	Ht.	Thk.		Each
Inch







	Steel

	Screws, Bolts, Threaded Rods, Pins, Rivets, Drill Bits	UNC/UNF	External	1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-36, 4-40, 4-48, 5-40, 5-44, 6-32, 6-36, 6-40, 8-32, 8-36, 8-40, 10-24, 10-32, 12-24, 12-28, 12-32, 1/4"-20, 1/4"-28, 1/4"-32, 5/16"-18, 5/16"-24, 5/16"-32	No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16"	0.073", 0.086", 3/32", 0.112", 1/8", 0.138", 5/32", 0.164", 3/16", 7/32", 1/4", 9/32", 5/16"	7/32", 1/4", 9/32", 5/16", 53 Ga., 51 Ga., 50 Ga., 48 Ga., 47 Ga., 45 Ga., 43 Ga., 42 Ga., 39 Ga., 38 Ga., 37 Ga., 36 Ga., 35 Ga., 33 Ga., 30 Ga., 29 Ga., 28 Ga., 25 Ga., 23 Ga., 21 Ga., 19 Ga., 16 Ga., 14 Ga., 13 Ga., 10 Ga., 8 Ga., 3 Ga., F, I	3"	5 1/8"	5/64"	98728A112	000000

Extra-Flexible Wire Rope with Reinforced Loop

Quickly attach a shackle or hook to the reinforced loop on this wire rope. Also known as a thimble eye, the loop saves you time when setting up pulley or towing systems. With more than twice as many individual wires as standard options, it's also easier to bend and wind onto winches and drums without wear.

Warning: Not for overhead lifting.

18-8 Stainless Steel—With solid stainless steel construction, this wire rope has no plating that could wear away. It resists rust, but it won't hold up to the harsh chemicals that 316 stainless steel can.

Galvanized Steel—The outer layer resists moisture but can wear down when exposed to salt water and chemicals.

Wire Rope Construction—Strand core rope is crush and impact-resistant.

Preformed—With each wire shaped into a spiral before being twisted onto the rope, they maintain their shape when cut. This keeps them from unraveling or poking equipment and users.

	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Loop Inside Lg.	Preformed	Specifications Met		5 ft. Long	10 ft. Long	15 ft. Long	20 ft. Long	25 ft. Long	30 ft. Long	40 ft. Long	50 ft. Long	100 ft. Long
18-8 Stainless Steel



	7/32"	1,000	7 × 19 Strand Core	5 11/16"	2"	Yes	Fed. Spec. RR-W-410	1610N64	000000	000000	0000000	0000000	0000000	0000000	—	0000000	0000000


	Galvanized Steel



			7/32"	1,120	7 × 19 Strand Core	5 11/16"	1 5/8"	Yes	Fed. Spec. RR-W-410	2134N53	00000	00000	00000	00000	000000	000000	0000000	000000	—

Rotation-Resistant Wire Rope for Lifting

19 × 7 Strand Core

This wire rope won't spin or twist loads in the air. The outer strands twist in the opposite direction of the inner strands to keep loads stable when lifted or suspended. They're often used to lift and lower elevators without any unwanted movement.

Warning: Never use wire rope to lift people or items over people.

Wire Rope Construction— Independent Wire Rope Core (IWRC) is the strongest wire rope construction, but strand core rope is a durable alternative for lighter-duty applications.

Preformed—With each wire shaped into a spiral before being twisted onto the rope, they maintain their shape when cut. This keeps them from unraveling or poking equipment and users.

	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Preformed	Specifications Met	Choose a Length, ft.		Per Ft.
18-8 Stainless Steel



	7/32"	900	19 × 7 Strand Core	5 1/4"	Yes	MIL-DTL-83140	5 , 10 , 25 , 50 , 100 , 250 , 500	3461T952	00000

Wire Rope Compression Sleeves—For Lifting

Install with a compression tool to create a strong, permanent loop. Compression sleeves are also known as ferrules, crimps, swaging, and splicing sleeves. They're compatible with Nicopress compression tools.

Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

Tin-Plated Copper—Tin-plated copper sleeves have mild corrosion resistance.

Black-Oxide Copper—Black-oxide copper sleeves have a dark surface color and mild corrosion resistance.

Zinc-Plated Copper—Zinc-plated copper sleeves are more corrosion resistant than tin-plated or black-oxide copper.

18-8 Stainless Steel—18-8 stainless steel sleeves have excellent corrosion resistance to chemicals.

	Sleeves										Tools
	For Wire Rope
	Dia.	Construction	Sleeve Lg.	Req. No. of Compressions	Rope Cap. Adjustment Factor	Specs. Met	Mil. Spec.	Pkg. Qty.		Pkg.		Each
Copper







				For Steel Rope

				7/32"	7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC	7/8"	4	100%	ASME B30.9	MS51844	10	3897T8	000000	35155T17	0000000


				Tin-Plated Copper







								For Steel and Stainless Steel Rope

								7/32"	7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC	7/8"	4	100%	ASME B30.9	MS51844	10	3883T46	00000	35155T17	000000


								Black-Oxide Copper







												For Steel and Stainless Steel Rope

												7/32"	3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC	7/8"	4	100%	ASME B30.9	—	5	3576N18	00000	35155T17	000000


												Zinc-Plated Copper







																For Steel Rope

																7/32"	7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC	7/8"	4	100%	ASME B30.9	MS51844	10	3898T17	00000	35155T17	000000


																18-8 Stainless Steel







																				For Stainless Steel Rope

																				7/32"	7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC	7/8"	1	100%	ASME B30.9	MS51844	1	3755T22	0000	———	0

Extra-Flexible Wire Rope with Hook

Quickly attach this flexible wire rope to loads. It includes a hook with a latch on one end to save you time when setting up pulley systems. With more than twice as many individual wires as standard options, it's also easier to bend and wind onto winches and drums without wear.

Warning: Not for overhead lifting.

Wire Rope Construction—Strand core rope is crush and impact-resistant.

Preformed—With each wire shaped into a spiral before being twisted onto the rope, they maintain their shape when cut. This keeps them from unraveling or poking equipment and users.

					Hook
	Dia.	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Opening Wd.	Usable Lg.	Preformed	Specifications Met		5 ft. Long	10 ft. Long	15 ft. Long	20 ft. Long	25 ft. Long	30 ft. Long	40 ft. Long	50 ft. Long
18-8 Stainless Steel



		7/32"	1,000	7 × 19 Strand Core	5 11/16"	11/16"	2 9/16"	Yes	Fed. Spec. RR-W-410	1849N16	000000	000000	0000000	0000000	0000000	0000000	0000000	0000000

Extra-Flexible Wire Rope with Hook for Lifting

The hook and latch on this wire rope quickly attaches to loads. This saves you time when setting up cranes and hoists for lifting jobs. With more than twice as many individual wires as standard options, it's also easier to bend and wind around winches without wearing it down.

Warning: Never use wire rope to lift people or items over people.

Galvanized Steel—The outer layer resists moisture but can wear down when exposed to salt water and chemicals.

Wire Rope Construction—Independent Wire Rope Core (IWRC) is the strongest wire rope construction.

Preformed—With each wire shaped into a spiral before being twisted onto the rope, they maintain their shape when cut. This keeps them from unraveling or poking equipment and users.

					Hook
	Dia.	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Opening Wd.	Usable Lg.	Preformed		10 ft. Long	15 ft. Long	20 ft. Long	25 ft. Long	30 ft. Long	40 ft. Long	50 ft. Long	75 ft. Long	100 ft. Long
Galvanized Steel



		7/32"	1,100	7 × 19 IWRC	5 11/16"	7/8"	3 1/4"	Yes	3308T54	000000	000000	000000	000000	000000	0000000	0000000	0000000	0000000

Extra-Flexible Wire Rope

7 × 19 Strand Core

Wire Rope

Wind this wire rope onto a winch or drum to pull and tow vehicles, trailers, and more. It contains more than twice as many individual wires as standard wire rope to bend easily without wear. All rope is manufactured in the U.S.

Warning: Not for overhead lifting.

Galvanized Steel—The outer layer resists moisture but can wear down when exposed to salt water and chemicals.

Wire Rope Construction—Strand cores are more crush and impact-resistant than fiber cores, but fiber core ropes bend more easily and absorb shock.

Preformed—With each wire shaped into a spiral before being twisted onto the rope, they maintain their shape when cut. This keeps them from unraveling or poking equipment and users.

	Wt. Cap., lb.	Wire Rope Construction	Recommended Pulley/Drum Dia.	Preformed	Specifications Met	Choose a Length, ft.		Per Ft.
Galvanized Steel



	7/32"	1,100	7 × 19 Strand Core	5 11/16"	Yes	MIL-DTL-83420	5 , 10 , 25 , 50 , 100	3332T55	00000


	7/32"	1,100	7 × 19 Strand Core	5 11/16"	Yes	ASTM A1023	10 , 25 , 50 , 100 , 300	3450T42	0000


	18-8 Stainless Steel



			7/32"	1,000	7 × 19 Strand Core	5 1/4"	Yes	—	10 , 25 , 50 , 100	3461T78	0000


			7/32"	1,000	7 × 19 Strand Core	5 11/16"	Yes	MIL-DTL-83420	10 , 25 , 50 , 100	3461T97	0000

Tight-Tolerance Machinable 303 Stainless Steel Rods

This material has tighter tolerances than standard 303 stainless steel. Rods are precision ground and held to a strict straightness tolerance, so they are ready for turning in a lathe.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools. It maintains its corrosion resistance in temperatures up to 1500° F.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Long Rods

Image of Product. Front orientation. Stainless Steel. Tight-Tolerance Machinable 303 Stainless Steel Rods.

Dia.	Dia. Tolerance	Fabrication	Hardness	Specs. Met		1/2 ft. Long	1 ft. Long	2 ft. Long	3 ft. Long	6 ft. Long
7/32"	-0.0005" to 0"	Cold Worked	Rockwell B85 (Medium)	ASTM A582, SAE AMS5640	88915K16	00000	00000	000000	000000	000000

Single-Diameter Compression Tools for Rope and Wire Rope Sleeves

Style A

Style A—Style A include a measuring gauge that confirms proper installation of the compressed sleeve.

Tools								Replacement Measuring Gauges
Style	For Compression Sleeve Material (Wire Rope Dia.)	Material	Handle Material	Overall Lg.	Includes		Each		Each
A	Copper (7/32")	Alloy Steel	Steel	18 1/4"	Measuring Gauge	35155T17	0000000	3377T13	000000

Machinable 303 Stainless Steel Rods

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools. It maintains its corrosion resistance in temperatures up to 1500° F.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Long Rods

Image of Product. Front orientation. Stainless Steel. Machinable 303 Stainless Steel Rods.

Dia.	Dia. Tolerance	Fabrication	Hardness	Specs. Met		1/2 ft. Long	1 ft. Long	2 ft. Long	3 ft. Long	6 ft. Long
7/32"	-0.001" to 0.001"	Cold Drawn	Rockwell B77 (Medium)	ASTM A582	8984K89	00000	00000	00000	00000	00000

Eye-End Roller Swage Wire Rope End Fittings—Not for Lifting

Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of stainless steel, they offer excellent corrosion resistance to chemicals.

316 Stainless Steel—316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.

	For Wire Rope			Eye
	Dia.	Construction	End-to-Eye Lg.	ID	Thk.	Shank Dia.	Wt. Cap., lb.	Mil. Spec.		Each
18-8 Stainless Steel



		7/32"	1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core	3 3/8"	5/16"	9/32"	27/64"	1,120	MS20668	3872T16	000000


		316 Stainless Steel



				7/32"	1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core	3 7/32"	7/16"	13/32"	27/64"	1,120	—	3872T26	00000

Ball-with-Shank-End Roller Swage Wire Rope End Fittings—Not for Lifting

Image of Product. Bottom orientation. Contains Annotated. Wire Rope End Fittings. Ball-with-Shank-End Roller Swage Wire Rope End Fittings—Not for Lifting.

Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, these fittings have excellent corrosion resistance to chemicals.

	For Wire Rope				Ball
	Dia.	Construction	Lg.	Shank Dia.	Lg.	Dia.	Wt. Cap., lb.	Mil. Spec.		Each
18-8 Stainless Steel



		7/32"	1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core	27/32"	23/64"	5/16"	9/16"	1,260	MS20664	3869T69	000000

Plugs for Plug-Lock Wire Rope End Fittings—For Lifting

Use a new plug when installing a fitting on a different rope.

For Wire Rope
Dia.	Construction	Material		Each
7/32"	6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core	Brass	3475T22	000000

Light Duty Wire Rope Thimbles—Not for Lifting

Use one of these thimbles to support a wire rope loop and prevent it from fraying. They are also known as thin pattern thimbles.

Warning: Do not use with coated rope unless the coating is removed.

Zinc-Plated Steel—Zinc-plated steel thimbles are mildly corrosion resistant.

18-8 Stainless Steel—18-8 stainless steel thimbles are more corrosion resistant to chemicals than steel thimbles.

		Loop
	For Dia.	Inside Lg.	Inside Wd.	Mil. Spec.	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		7/32", 1/4"	1 7/16"	3/4"	AN100, MIL-T-5677	5	8914T16	00000


		18-8 Stainless Steel



				7/32", 1/4"	1 7/16"	3/4"	AN100, MIL-T-5677	1	8914T26	0000

Ultra-Machinable 360 Brass Rods

With the highest lead content, 360 is the easiest brass alloy to machine. Known as free-machining and free-cutting brass, it handles high-speed drilling, milling, and tapping with minimal wear on your tools. You’ll often see it made into gears, pinions, and lock components.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Long Rods

Image of Product. Front orientation. Brass. Ultra-Machinable 360 Brass Rods.

Dia.	Dia. Tolerance	Temper Designation	Specs. Met		1/2 ft. Long	1 ft. Long	2 ft. Long	3 ft. Long	6 ft. Long
7/32"	-0.003" to 0.003"	H02	ASTM B16	8953K118	00000	00000	000000	000000	000000

Wire Rope Stops—Not for Lifting

Copper—Copper stops are stronger than aluminum.

Zinc-Plated Copper—Zinc-plated copper stops are more corrosion resistant than uncoated copper.

	Stops										Tools
	For Wire Rope
	Dia.	Construction	OD	Compressed OD	Sleeve Lg.	Req. No. of Compressions	Rope Cap. Adjustment Factor	Pkg. Qty.		Pkg.		Each
Copper







				For Steel Wire Ropes

				7/32"	1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core	7/16"	11/32"	5/8"	2	40%	10	3926T36	00000	3582T22	0000000


				Zinc-Plated Copper







								For Steel and Stainless Steel Wire Ropes

								7/32"	1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core	7/16"	11/32"	5/8"	2	40%	10	3936T17	0000	3582T22	000000

Comfort-Grip Shock-Absorbing Wear-Resistant Rope—Not for Lifting

Also known as sash cord, this rope has a soft cotton cover, so you can grip it without hurting your hands. It's made of nylon to compensate for sudden force, such as in towing applications or dock lines. The braided cover protects the braided core from wear during use. The rope resists rot and mildew. When wet, it can lose up to 20% of its strength. It knots easily and does not rotate under load.