Filter by
Material
Wire Rope Construction
Conduit Connection
Fitting Connection
Clamp Material
Attachment Type
Clamp Width
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Cast Wire Rope Clamps—Not for Lifting
 |  |
Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Galvanized Iron—Galvanized iron clamps have a thicker coating than zinc-plated clamps for added corrosion resistance.
Zinc-Plated Iron—Zinc-plated iron clamps are mildly corrosion resistant.
For Wire Rope | Clamp | Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Number of Clamps Required | Rope Turnback | Wd. | Ht. | Thk. | Fabrication | Req. Torque, ft·lbf | Rope Cap. Adjustment Factor | 1-24 | 25-99 | 100-Up | |||
Iron | |||||||||||||||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 4 3/4" | 55/64" | 61/64" | 3/8" | Cast | 2 | Not Rated | 30325T14 | 00000 | 00000 | 00000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 4 3/4" | 1" | 1 5/32" | 7/16" | Cast | 3 | Not Rated | 30325T61 | 0000 | 0000 | 0000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 5 1/2" | 1" | 1 5/32" | 7/16" | Cast | 4.5 | Not Rated | 30325T62 | 0000 | 0000 | 0000 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 7" | 1 3/16" | 1 25/64" | 1/2" | Cast | 15 | Not Rated | 30325T63 | 0000 | 0000 | 0000 | ||
| 5/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 7 3/4" | 1 3/16" | 1 25/64" | 1/2" | Cast | 15 | Not Rated | 30325T64 | 0000 | 0000 | 0000 | ||
| 3/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 9 1/2" | 1 7/16" | 1 13/16" | 9/16" | Cast | 30 | Not Rated | 30325T65 | 0000 | 0000 | 0000 | ||
| 7/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 10 1/4" | 1 7/16" | 1 13/16" | 9/16" | Cast | 40 | Not Rated | 30325T66 | 0000 | 0000 | 0000 | ||
| 1/2" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 15 1/4" | 1 13/16" | 2 1/4" | 3/4" | Cast | 45 | Not Rated | 30325T67 | 0000 | 0000 | 0000 | ||
| 9/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 16" | 1 15/16" | 2 5/8" | 3/4" | Cast | 50 | Not Rated | 30325T48 | 0000 | 0000 | 0000 | ||
| 5/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 16" | 1 15/16" | 2 5/8" | 3/4" | Cast | 75 | Not Rated | 30325T39 | 0000 | 0000 | 0000 | ||
| 3/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5 | 22 1/4" | 2 5/16" | 3 1/4" | 15/16" | Cast | 75 | Not Rated | 30325T69 | 0000 | 0000 | 0000 | ||
| 7/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5 | 23 1/2" | 2 11/16" | 3 25/32" | 15/16" | Cast | 130 | Not Rated | 30325T71 | 0000 | 0000 | 0000 | ||
| 1" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 6 | 31" | 2 11/16" | 3 25/32" | 15/16" | Cast | 130 | Not Rated | 30325T72 | 00000 | 00000 | 0000 | ||
Galvanized Iron | |||||||||||||||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 7" | 1 3/16" | 1 25/64" | 1/2" | Cast | 15 | Not Rated | 30325T83 | 0000 | 0000 | 0000 | ||
| 5/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 7 3/4" | 1 3/16" | 1 25/64" | 1/2" | Cast | 15 | Not Rated | 30325T84 | 0000 | 0000 | 0000 | ||
| 3/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 9 1/2" | 1 7/16" | 1 13/16" | 9/16" | Cast | 30 | Not Rated | 30325T85 | 0000 | 0000 | 0000 | ||
| 7/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 10 1/4" | 1 7/16" | 1 13/16" | 9/16" | Cast | 40 | Not Rated | 30325T86 | 0000 | 0000 | 0000 | ||
| 1/2" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 15 1/4" | 1 13/16" | 2 1/4" | 3/4" | Cast | 45 | Not Rated | 30325T87 | 0000 | 0000 | 0000 | ||
| 9/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 16" | 1 15/16" | 2 5/8" | 3/4" | Cast | 50 | Not Rated | 30325T55 | 0000 | 0000 | 0000 | ||
| 5/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 16" | 1 15/16" | 2 5/8" | 3/4" | Cast | 75 | Not Rated | 30325T46 | 0000 | 0000 | 0000 | ||
| 3/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5 | 22 1/4" | 2 5/16" | 3 1/4" | 15/16" | Cast | 75 | Not Rated | 30325T89 | 0000 | 0000 | 0000 | ||
| 7/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5 | 23 1/2" | 2 11/16" | 3 25/32" | 15/16" | Cast | 130 | Not Rated | 30325T9 | 00000 | 00000 | 00000 | ||
| 1" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 6 | 31" | 2 11/16" | 3 25/32" | 15/16" | Cast | 130 | Not Rated | 30325T91 | 00000 | 00000 | 00000 | ||
Zinc-Plated Iron | |||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 4 3/4" | 19/32" | 3/4" | 9/32" | Cast | 2 | Not Rated | 30325T13 | 0000 | 0000 | 0000 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 4 3/4" | 55/64" | 61/64" | 3/8" | Cast | 2 | Not Rated | 30325T15 | 0000 | 0000 | 0000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 4 3/4" | 1" | 1 5/32" | 7/16" | Cast | 3 | Not Rated | 30325T26 | 0000 | 0000 | 0000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 5 1/2" | 1" | 1 5/32" | 7/16" | Cast | 4.5 | Not Rated | 30325T27 | 0000 | 0000 | 0000 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 7" | 1 3/16" | 1 25/64" | 1/2" | Cast | 15 | Not Rated | 30325T28 | 0000 | 0000 | 0000 | ||
| 5/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 7 3/4" | 1 3/16" | 1 25/64" | 1/2" | Cast | 15 | Not Rated | 30325T29 | 0000 | 0000 | 0000 | ||
| 3/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 9 1/2" | 1 7/16" | 1 13/16" | 9/16" | Cast | 30 | Not Rated | 30325T31 | 0000 | 0000 | 0000 | ||
| 7/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 10 1/4" | 1 7/16" | 1 13/16" | 9/16" | Cast | 40 | Not Rated | 30325T32 | 0000 | 0000 | 0000 | ||
| 1/2" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 15 1/4" | 1 13/16" | 2 1/4" | 3/4" | Cast | 45 | Not Rated | 30325T33 | 0000 | 0000 | 0000 | ||
| 9/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 16" | 1 15/16" | 2 5/8" | 3/4" | Cast | 50 | Not Rated | 30325T49 | 0000 | 0000 | 0000 | ||
| 5/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 16" | 1 15/16" | 2 5/8" | 3/4" | Cast | 75 | Not Rated | 30325T45 | 0000 | 0000 | 0000 | ||
| 3/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5 | 22 1/4" | 2 5/16" | 3 1/4" | 15/16" | Cast | 75 | Not Rated | 30325T35 | 0000 | 0000 | 0000 | ||
| 7/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5 | 23 1/2" | 2 11/16" | 3 25/32" | 15/16" | Cast | 130 | Not Rated | 30325T36 | 00000 | 0000 | 0000 | ||
| 1" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 6 | 31" | 2 11/16" | 3 25/32" | 15/16" | Cast | 130 | Not Rated | 30325T37 | 00000 | 00000 | 00000 | ||
Wire Rope Clamp and Thimble Kits—Not for Lifting
 |  |  |
Clamp | Thimble |
Kits include clamps and thimbles to protect the inside of wire rope loops from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Galvanized Iron Clamp—Galvanized iron clamps are corrosion resistant.
For Wire Rope | Clamp | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | No. of Clamps | Rope Turnback | Wd. | Ht. | Thk. | No. of Thimbles | Fabrication | Req. Torque, ft·lbf | Rope Cap. Adjustment Factor | Mil. Spec. | Each | |||
Galvanized Iron Clamps with Galvanized Steel Thimble | |||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 3 × 7 IWRC 6 × 7 Fiber Core 7 × 7 IWRC 7 × 7 Strand Core | 2 | 2 3/4" | 11/16" | 13/16" | 7/16" | 1 | Cast | — | Not Rated | Fed. Spec. FF-C-450 | 3372T72 | 00000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 4 3/4" | 7/8" | 31/32" | 3/8" | 1 | Cast | 3 | Not Rated | Fed. Spec. FF-C-450 | 3372T61 | 0000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 5 1/2" | 1" | 1 5/32" | 7/16" | 1 | Cast | 4.5 | Not Rated | Fed. Spec. FF-C-450 | 3372T62 | 0000 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 7" | 1 1/4" | 1 13/32" | 9/16" | 1 | Cast | 15 | Not Rated | Fed. Spec. FF-C-450 | 3372T63 | 0000 | ||
| 5/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 3 | 7 3/4" | 1 9/16" | 1 13/16" | 11/16" | 1 | Cast | 15 | Not Rated | Fed. Spec. FF-C-450 | 3372T64 | 0000 | ||
| 3/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 9 1/2" | 1 7/8" | 2 1/4" | 7/8" | 1 | Cast | 30 | Not Rated | Fed. Spec. FF-C-450 | 3372T65 | 0000 | ||
| 7/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 | 10 1/4" | 2 1/16" | 2 3/8" | 7/8" | 1 | Cast | 40 | Not Rated | Fed. Spec. FF-C-450 | 3372T66 | 00000 | ||
| 1/2" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 15 1/4" | 2 1/16" | 2 41/64" | 7/8" | 1 | Cast | 45 | Not Rated | Fed. Spec. FF-C-450 | 3372T67 | 00000 | ||
| 5/8" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 | 16" | 2 3/8" | 3 1/4" | 1 1/16" | 1 | Cast | 75 | Not Rated | Fed. Spec. FF-C-450 | 3372T68 | 00000 | ||
| 3/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5 | 22 1/4" | 2 9/16" | 3 5/16" | 1 1/16" | 1 | Cast | 75 | Not Rated | Fed. Spec. FF-C-450 | 3372T69 | 00000 | ||
Easy-Install Wire Rope Clamps—Not for Lifting
 |
With Screw |
Make a removable loop without specialty tools for use in noncritical applications, such as fencing. They're also known as tiller clamps.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Zinc-Plated Iron—Zinc-plated iron clamps are mildly corrosion resistant.
Nickel-Plated Iron—Nickel-plated iron clamps are more corrosion resistant than zinc-plated clamps.
For Wire Rope | Clamp | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Lg. | Wd. | Thk. | Wt. Cap. | No. of Screws | Each | |||
Zinc-Plated Iron | ||||||||||
| 3/8" | 1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 2 5/16" | 1 3/16" | 5/8" | Not Rated | 3 | 3471T15 | 000000 | ||
Nickel-Plated Iron | ||||||||||
| 3/8" | 1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 2 5/16" | 1 3/16" | 5/8" | Not Rated | 3 | 3471T26 | 00000 | ||
Easy-Print PLA 3D Printer Filaments
 |
 |
Gray |
The most commonly used 3D printing material, these PLA filaments make detailed parts at a low melting point, so they won’t warp as they cool, rarely clog nozzles, and don’t require a heated printer bed. They’re also unlikely to drip and produce plastic strings for a clean finished part. In general, they’re best for printing prototypes instead of load-bearing parts since they’re not as strong as ABS or as heat resistant as PEEK. Print them on a fused filament fabrication (FFF) 3D printer.
Filaments with an annealing temperature can be heat treated to make parts harder, stronger, and better at resisting heat. To anneal, heat your finished part to the listed temperature and then let it cool slowly.
Maximum exposure temperature is the point at which a printed part will begin to deform. Above this temperature, your part will start to lose structural integrity. Filaments that can be annealed are also rated for maximum temperature after annealing, which is the new maximum exposure temperature once that process completes.
Iron Filled—Stainless steel-, iron-, copper-, and brass-filled PLA filaments are heavier and transfer heat better than plastic-only filaments. Brush, sand, or polish printed parts for a metallic finish. Stainless steel and iron are abrasive, so use them with abrasion-resistant nozzles only. Iron will also rust if exposed to water.
Tensile Strength—Tensile strength is the best measure of a filament's overall strength. Similar to the stress applied on a rope during a game of tug-of-war, it's the amount of pulling force a material can handle before breaking. A higher rating means a stronger filament. A tensile strength of 5,000 psi and above is considered good; 12,000 psi and above is excellent.
Spool | Each | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia., mm | Printing Temp. | For Printer Bed Temp. | Tensile Strength | Hardness | Max. Exposure Temp. | For Min. Nozzle Opening Dia., mm | Dia., mm | Dp., mm | Material | Wt., g | 1-9 | 10-Up | |||
Iron-Filled PLA | |||||||||||||||
Opaque Gray | |||||||||||||||
| 1.75 | 190° to 210° C 374° to 410° F | 21° to 60° C 70° to 140° F | Not Rated | Not Rated | 60° C 140° F | 0.4 | 200 | 50 | Cardboard | 500 | 1317N31 | 000000 | 000000 | ||
| 1.75 | 190° to 210° C 374° to 410° F | 21° to 60° C 70° to 140° F | Not Rated | Not Rated | 60° C 140° F | 0.4 | 300 | 100 | Plastic | 2,000 | 1317N28 | 000000 | 000000 | ||
| 2.85 | 190° to 210° C 374° to 410° F | 21° to 60° C 70° to 140° F | Not Rated | Not Rated | 60° C 140° F | 0.4 | 200 | 50 | Cardboard | 500 | 1317N32 | 00000 | 00000 | ||
Flexible Metal (FMC) Conduit and Fittings
 |
Make tight bends and protect wiring from being crushed. This corrugated conduit snakes around corners where rigid metal conduit won’t fit. For use indoors, it’s ideal for short connections or runs through walls in spaces that require both flexibility and durability.
Straight Electrical Box Connectors
 |
Screw-Clamp × Threaded |
Conduit Connection | Knockout Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Conduit Trade Size | Gender | Pipe Size | Thread Type | Gender | Includes | Specs. Met | Each | |||
Screw-Clamp Conduit Connection × Threaded Knockout Connection | ||||||||||
Zinc-Plated Iron | ||||||||||
| 3/8 | Female | 1/2 | NPSM | Male | Locknut | UL Listed | 7920K81 | 00000 | ||
| 1/2 | Female | 1/2 | NPSM | Male | Locknut | UL Listed | 7920K82 | 0000 | ||
| 3/4 | Female | 3/4 | NPSM | Male | Locknut | UL Listed | 7920K83 | 0000 | ||
| 1 | Female | 1 | NPT | Male | Locknut | UL Listed | 7920K84 | 0000 | ||
| 1 1/4 | Female | 1 1/4 | NPT | Male | Locknut | UL Listed | 7920K85 | 0000 | ||
| 1 1/2 | Female | 1 1/2 | NPT | Male | Locknut | UL Listed | 7920K86 | 00000 | ||
| 2 | Female | 2 | NPT | Male | Locknut | UL Listed | 7920K87 | 00000 | ||
90° Elbow Electrical Box Connectors
 |
Screw-Clamp × Threaded |
Conduit Connection | Knockout Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Conduit Trade Size | Gender | Pipe Size | Thread Type | Gender | Includes | Specs. Met | Each | |||
Screw-Clamp Conduit Connection × Threaded Knockout Connection | ||||||||||
Zinc-Plated Iron | ||||||||||
| 3/8 | Female | 1/2 | NPSM | Male | Locknut | UL Listed | 7920K71 | 00000 | ||
| 1/2 | Female | 1/2 | NPSM | Male | Locknut | UL Listed | 7920K72 | 0000 | ||
| 3/4 | Female | 3/4 | NPSM | Male | Locknut | UL Listed | 7920K73 | 0000 | ||
| 1 | Female | 1 | NPSM | Male | Locknut | UL Listed | 7920K74 | 00000 | ||
| 1 1/4 | Female | 1 1/4 | NPSM | Male | Locknut | UL Listed | 7920K75 | 00000 | ||
| 1 1/2 | Female | 1 1/2 | NPSM | Male | Locknut | UL Listed | 7920K76 | 00000 | ||
| 2 | Female | 2 | NPSM | Male | Locknut | UL Listed | 7920K77 | 00000 | ||
Conduit Bodies
Straight (C)
 |
Threaded Conduit Connection |
Conduit Trade Size | Thread Type | Gender | For Conduit Type | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|
Threaded Conduit Connection | ||||||||
Zinc-Plated Iron | ||||||||
| 1/2 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K71 | 000000 | ||
| 3/4 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K72 | 00000 | ||
| 1 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K73 | 00000 | ||
| 1 1/4 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K74 | 00000 | ||
| 1 1/2 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K75 | 00000 | ||
| 2 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K76 | 000000 | ||
Tee (T)
 |
Threaded Conduit Connection |
Conduit Trade Size | Thread Type | Gender | For Conduit Type | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|
Threaded Conduit Connection | ||||||||
Zinc-Plated Iron | ||||||||
| 1/2 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K81 | 000000 | ||
| 3/4 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K82 | 00000 | ||
| 1 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K83 | 00000 | ||
| 1 1/2 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K85 | 00000 | ||
| 2 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K86 | 000000 | ||
90° Elbow (LB)
 |
Threaded Conduit Connection |
Conduit Trade Size | Thread Type | Gender | For Conduit Type | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|
Threaded Conduit Connection | ||||||||
Zinc-Plated Iron | ||||||||
| 1/2 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K91 | 000000 | ||
| 3/4 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K92 | 00000 | ||
| 1 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K93 | 00000 | ||
| 1 1/4 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K94 | 00000 | ||
| 1 1/2 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K95 | 00000 | ||
| 2 | NPT | Female | IMC, RMC | CSA Certified, UL Listed | 9190K96 | 000000 | ||
Liquid-Tight Flexible Metal (LFMC) Conduit and Fittings
 |
Seal out moisture with conduit that also prevents crushing in tight spaces. The corrugated metal core bends around obstacles without damaging cables, and the protective cover keeps water out. Use with compatible fittings for a liquid-tight seal in wet indoor, outdoor, and underground locations.
Straight Electrical Box Connectors
 |
Twist-In × Threaded with Grounding Lug |
Attach conduit to a knockout in an electrical box.
Zinc-Plated Iron—Resist occasional exposure to moisture but not as strong as zinc‑plated steel.
Grounding Lug—Prevent conduit from becoming a shock hazard by running a ground wire through the lug to redirect current.
Conduit Connection | Knockout Connection | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Conduit Trade Size | Gender | Pipe Size | Thread Type | Gender | Features | Includes | Specs. Met | Each | |||
Twist-In Conduit Connection × Threaded Knockout Connection | |||||||||||
Zinc-Plated Iron | |||||||||||
| 1 1/4 | Female | 1 1/4 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K65 | 000000 | ||
| 1 1/2 | Female | 1 1/2 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K66 | 00000 | ||
| 2 | Female | 2 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K67 | 000000 | ||
45° Elbow Electrical Box Connectors
 |  |
Twist-In × Threaded | Twist-In × Threaded with Grounding Lug |
Change the direction of your run to connect to a knockout in an electrical box.
Zinc-Plated Iron—Resist occasional exposure to moisture but not as strong as zinc‑plated steel.
Grounding Lug—Prevent conduit from becoming a shock hazard by running a ground wire through the lug to redirect current.
Conduit Connection | Knockout Connection | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Conduit Trade Size | Gender | Pipe Size | Thread Type | Gender | Features | Includes | Specs. Met | Each | |||
Twist-In Conduit Connection × Threaded Knockout Connection | |||||||||||
Zinc-Plated Iron | |||||||||||
| 3/8 | Female | 1/2 | NPT | Male | — | Locknut | C-UL Listed, UL Listed | 7119K37 | 00000 | ||
| 3/8 | Female | 1/2 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K15 | 00000 | ||
| 3/8 | Female | 1/2 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K11 | 00000 | ||
| 1/2 | Female | 1/2 | NPT | Male | — | Locknut | C-UL Listed, UL Listed | 7119K38 | 0000 | ||
| 1/2 | Female | 1/2 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K16 | 00000 | ||
| 1/2 | Female | 1/2 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K12 | 00000 | ||
| 3/4 | Female | 3/4 | NPT | Male | — | Locknut | C-UL Listed, UL Listed | 7119K39 | 00000 | ||
| 3/4 | Female | 3/4 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K17 | 00000 | ||
| 3/4 | Female | 3/4 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K13 | 00000 | ||
| 1 | Female | 1 | NPT | Male | — | Locknut | C-UL Listed, UL Listed | 7119K41 | 00000 | ||
| 1 | Female | 1 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K62 | 00000 | ||
| 1 | Female | 1 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K14 | 00000 | ||
| 1 1/4 | Female | 1 1/4 | NPT | Male | — | Locknut | C-UL Listed, UL Listed | 7119K42 | 00000 | ||
| 1 1/4 | Female | 1 1/4 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K97 | 00000 | ||
| 1 1/4 | Female | 1 1/4 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K15 | 00000 | ||
| 1 1/2 | Female | 1 1/2 | NPT | Male | — | Locknut | C-UL Listed, UL Listed | 7119K43 | 00000 | ||
| 1 1/2 | Female | 1 1/2 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K98 | 00000 | ||
| 1 1/2 | Female | 1 1/2 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K16 | 000000 | ||
| 2 | Female | 2 | NPT | Male | — | Locknut | C-UL Listed, UL Listed | 7119K44 | 00000 | ||
| 2 | Female | 2 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K99 | 00000 | ||
| 2 | Female | 2 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K17 | 000000 | ||
90° Elbow Electrical Box Connectors
 |  |  |
Twist-In × Threaded | Twist-In × Threaded with Grounding Lug | Twist-In × Threaded with Wire-Mesh Grip |
Conduit Connection | Knockout Connection | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Conduit Trade Size | Gender | Pipe Size | Thread Type | Gender | Features | Includes | Specs. Met | Each | |||
Twist-In Conduit Connection × Threaded Knockout Connection | |||||||||||
Zinc-Plated Iron | |||||||||||
| 3/8 | Female | 1/2 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K19 | 000000 | ||
| 3/8 | Female | 1/2 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K81 | 00000 | ||
| 1/2 | Female | 1/2 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K21 | 00000 | ||
| 1/2 | Female | 1/2 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K82 | 00000 | ||
| 3/4 | Female | 3/4 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K22 | 00000 | ||
| 3/4 | Female | 3/4 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K83 | 00000 | ||
| 1 | Female | 1 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K63 | 00000 | ||
| 1 | Female | 1 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K84 | 00000 | ||
| 1 1/4 | Female | 1 1/4 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K94 | 00000 | ||
| 1 1/4 | Female | 1 1/4 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K85 | 00000 | ||
| 1 1/2 | Female | 1 1/2 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K95 | 00000 | ||
| 1 1/2 | Female | 1 1/2 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K86 | 00000 | ||
| 1 1/2 | Female | 1 1/2 | NPT | Male | Stainless Steel Wire-Mesh Grip | Locknut | CSA Certified, UL Listed | 75535K61 | 000000 | ||
| 2 | Female | 2 | NPT | Male | — | Locknut | CSA Certified, UL Listed | 7119K96 | 00000 | ||
| 2 | Female | 2 | NPT | Male | Grounding Lug | Locknut | CSA Certified, UL Listed | 7951K87 | 000000 | ||
Medium-Wall (IMC) and Thick-Wall (RMC) Metal Conduit and Fittings
 |
The industry standards, IMC and RMC conduit systems offer the most durable protection indoors, outdoors, and underground. Both types have the same outside diameter, so they use many of the same fittings. This interchangeability makes retrofits easier and reduces the parts you need to keep on hand.
Conduit Unions
 |
Threaded Connection |
Conduit Trade Size | Thread Type | Gender | For Conduit Type | Features | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|---|
Threaded Conduit Connection | |||||||||
Zinc-Plated Iron | |||||||||
| 1/2 | NPT | Female | IMC, RMC | Glide Insert | UL Listed | 7513K41 | 00000 | ||
| 3/4 | NPT | Female | IMC, RMC | Glide Insert | UL Listed | 7513K42 | 0000 | ||
| 1 | NPT | Female | IMC, RMC | Glide Insert | UL Listed | 7513K43 | 00000 | ||
| 1 1/4 | NPT | Female | IMC, RMC | Glide Insert | UL Listed | 7513K34 | 00000 | ||
| 1 1/2 | NPT | Female | IMC, RMC | Glide Insert | UL Listed | 7513K35 | 00000 | ||
| 2 | NPT | Female | IMC, RMC | Glide Insert | UL Listed | 7513K36 | 00000 | ||
90° Elbow Electrical Box Connectors
 |
Threaded Connection |
Change the direction of your run to connect to a knockout in an electrical box.
Zinc-Plated Iron—Resist occasional exposure to moisture but not as strong as zinc‑plated steel.
Elbows | Locknuts | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Conduit Connection | Knockout Connection | |||||||||||||
Conduit Trade Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | For Conduit Type | Specs. Met | Each | Pkg. Qty. | Pkg. | ||||
Threaded Conduit and Knockout Connection | ||||||||||||||
Zinc-Plated Iron | ||||||||||||||
| 1/2 | NPSM | Female | 1/2 | NPSM | Male | IMC, RMC | UL Listed | 7513K71 | 00000 | 10 | 7513K241 | 00000 | ||
| 3/4 | NPSM | Female | 3/4 | NPSM | Male | IMC, RMC | UL Listed | 7513K72 | 00000 | 10 | 7513K242 | 0000 | ||
| 1 | NPSM | Female | 1 | NPSM | Male | IMC, RMC | CSA Certified, UL Listed | 7513K78 | 00000 | 10 | 7513K243 | 0000 | ||
| 1 1/4 | NPSM | Female | 1 1/4 | NPSM | Male | IMC, RMC | CSA Certified, UL Listed | 7513K74 | 00000 | 10 | 7513K244 | 0000 | ||
| 1 1/2 | NPSM | Female | 1 1/2 | NPSM | Male | IMC, RMC | CSA Certified, UL Listed | 7513K75 | 000000 | 10 | 7513K245 | 00000 | ||
| 2 | NPSM | Female | 2 | NPSM | Male | IMC, RMC | CSA Certified, UL Listed | 7513K76 | 000000 | 10 | 7513K246 | 00000 | ||
