Use these joiners on soft woods only.

Create a strong joint in a blind hole.

These Phillips head screws have a decorative rounded top that provides a finished appearance.

Drive these hangers into wood with an adjustable wrench, pliers, or a special driver bit.

18-8 stainless steel screws have good chemical resistance.

18-8 stainless steel screws have good chemical resistance.

These screws are beveled under the head for use in countersunk holes.

Brass screws are corrosion resistant in wet environments and electrically conductive.

These steel screws are hot-dipped galvanized to resist corrosion in wet environments.

Brass screws are corrosion resistant in wet environments and electrically conductive.

These steel screws are zinc plated to resist corrosion in wet environments.

These 316 stainless steel screws have excellent resistance to chemicals and salt water.

These steel screws have corrosion-resistant finishes.

18-8 stainless steel screws have good chemical resistance.

Beveled under the head for use in countersunk holes, these steel screws press threads into material for a tight, secure hold.

A decorative rounded top provides a finished appearance. These Phillips screws are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold.

18-8 stainless steel screws have good chemical resistance.

Also known as deck screws, these Phillips screws have a sharp point and narrow body to penetrate softwood and plastic-wood composite decking material.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

Threads change direction to cut into composites and push material back into the hole to prevent distorting the surface around the hole.

These screws speed installation by drilling, tapping, and fastening wood and metal in a single operation.

Thread-forming screws press threads into drilled holes for a tight vibration-resistant assembly.

These steel screws are zinc plated to resist corrosion in wet environments.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

Join two pieces of wood with these dowel pins. When glued, they expand for a tight fit.

These studs are also known as hanger bolts—use them to hang, mount, and fasten parts to wood structures.

18-8 stainless steel studs have good chemical resistance and may be mildly magnetic. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.

Use where vibration is a concern—these tee nut inserts have distorted threads that lock screws in place.

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water.

Steel inserts have high strength for durability.

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

Made from brass, these inserts are nonmagnetic, mildly corrosion resistant, and electrically conductive.

The flange keeps these inserts from being pulled through a hole and provides a load bearing surface.

These 18-8 stainless steel inserts have excellent resistance to chemicals and may be mildly magnetic.

Knurls hold these inserts in hardwoods such as oak, maple, and walnut to prevent twisting.

An open end allows long screws and bolts to pass through the insert.

Strengthen corners of cases and crates.

Connect wood 2×4s to posts and other flat surfaces.

Clamp these brackets to panel edges to quickly assemble crates.

Also known as linden, this basswood is moldable and lightweight, making it ideal for shipping boxes, crates, handles, and building models.

Also known as MDF, these fiberboard sheets are smoother, denser, and more uniform than real wood.

Lighter in weight than any other wood, yet still strong, these balsa cores stiffen composite sandwiches without weighing them down.

Made of thin layers of wood glued together under heat and pressure, plywood sheets are durable, yet lightweight.