McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    41 Products

    Rope Ladders

    Image of Product. Front orientation. Loop Mount. Rope Ladders, 2 Loops.
    Image of Product. Locking-Snap Hooks. Front orientation. With Locking Snap-Hook Mount. Rope Ladders.

    2 Loops

    Locking-Snap

    Hooks

    Attach one of these ladders to a fixed object and drop it into a tank, manhole, pit, or temporary work area. They’re lightweight, so you can easily carry them anywhere.
    Note: Check local, state, and federal codes, including OSHA, for safe set-up and operating practices.
    2 Loops—Ladders with 1 or 2 loop ends work well when you already have hooks you can slide the loops over. Otherwise, you’ll need to use carabiners or other hardware to secure these ladders to an anchor point.
    With Locking Snap-Hook Mount—Ladders with locking snap hooks have hardware built in for attaching directly to an anchor point.
    Overall
    Hook
    Step
    Max. Climbing
    Ht., ft.
    Ht.,
    ft.
    Wd.
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Rope
    Dia.
    Loop
    ID
    ID
    Ht.
    No. of
    Steps
    Material
    Tread
    Each
    Nylon Rope Rail
     
    With 2 Loop Mounts
    101515"300105/8"3"——10WoodSmooth8195T510000000
    121715"300125/8"3"——12WoodSmooth8195T52000000
    152015"300155/8"3"——15WoodSmooth8195T53000000
    202515"300205/8"3"——20WoodSmooth8195T54000000
    253015"300255/8"3"——25WoodSmooth8195T55000000
    303515"300305/8"3"——30WoodSmooth8195T56000000
    404515"300405/8"3"——40WoodSmooth8195T57000000
    505515"300505/8"3"——50WoodSmooth8195T58000000
     
    With Locking Snap-Hook Mount
    101515"300105/8"—1"5 3/4"10WoodSmooth8195T91000000
    121715"300125/8"—1"5 3/4"12WoodSmooth8195T92000000
    152015"300155/8"—1"5 3/4"15WoodSmooth8195T93000000
    202515"300205/8"—1"5 3/4"20WoodSmooth8195T94000000
    253015"300255/8"—1"5 3/4"25WoodSmooth8195T95000000
    303515"300305/8"—1"5 3/4"30WoodSmooth8195T96000000
    404515"300405/8"—1"5 3/4"40WoodSmooth8195T97000000
    505515"300505/8"—1"5 3/4"50WoodSmooth8195T98000000
     

    Uneven Surface Folding Work Platforms

    Image of ProductInUse. Front orientation. Work Platforms. Uneven Surface Folding Work Platforms.
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Uneven Surface Folding Work Platforms.
    Create a level and stable place to stand when working on stairs, ramps, and curbs. To ensure the legs don’t collapse during use, the leg locks require two hands to disengage. Two side supports extend to brace against the top of a step for added stability on stairs.
    Note: Check local, state, and federal codes, including OSHA, for safe setup and operating practices.
    Grit-Coated Plywood—On top of these platforms, a grit-coated plywood surface gives your boots reliable traction.
    Adjustable-Height Legs—Each leg on these platforms is adjustable, so you can set them at the exact heights you need to compensate for uneven surfaces.
    Carrying Handle—Fold these platforms and carry them by the handle for easy transport.
    Nonskid Feet—Rubber nonskid feet prevent the legs from shifting on uneven ground.
    Overall
    Top Step
    Wd.
    (B)
    Dp. (C)
    Wd.
    Dp.
    Material
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Assembly
    Features
    Each
    Aluminum
     
    18" to 30" Overall Height (A)
    29 1/2"45 1/2" to 50 1/2"22 1/2"43"Grit-Coated Plywood35028AssembledAdjustable-Height Legs, Carrying Handle, Nonskid Feet9484N1110000000
     

    Folding Work Platforms

    Image of Product. Front orientation. Contains Annotated. Work Platforms. Folding Work Platforms.
    Folding legs make these platforms easy to take anywhere. When folded, legs lock in place under the platform with safety clips. Climb up from either side. These platforms offer good slip resistance.
    Grit-Coated Plywood—Platforms with a grit-coated plywood top step have a higher weight capacity than those with an aluminum top step.
    Overall
    Top Step
    Bottom
    Step
    Wd.
    (B)
    Dp.
    (C)
    Wd.
    Dp.
    Material
    Wd.
    Dp.
    Step
    Material
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Assembly
    Features
    Each
    Aluminum
     
    21" Overall Height (A)
    22 1/2"69"22 3/4"60 1/4"Grit-Coated Plywood21"2 1/8"Aluminum
    		50037AssembledCarrying Handle81635T470000000
     

    Shoes for Step Ladders

    Replace worn out shoes on step ladders.
    For Wood Rails
    Image of Product. Front orientation. Ladder Feet. Shoes for Step Ladders, For Wood Rails, For 7/8" Wide Rails.
    Image of Product. Front orientation. Ladder Feet. Shoes for Step Ladders, For Wood Rails, For 1 1/8" Wide Rails.

    For 7/8" Wide Rails

    For 1 1/8" Wide Rails

    For Rail
    Wd.
    For Front
    Rail Dp.
    For Back
    Rail Dp.
    No. of Shoes
    Included
    Material
    Mounting Hardware
    Included
    Each
    7/8"3 1/2"2 3/8"4Galvanized SteelYes8186T12000000
    1 1/8"3 1/2"2 3/8"4Galvanized SteelYes8186T1600000
     

    Shoes for Straight and Extension Ladders

    Replace worn out shoes on straight and extension ladders.
    For Wood Rails
    Image of Product. Front orientation. Ladder Feet. Shoes for Straight and Extension Ladders, For Wood Rails.
    For
    Rail
    Wd.
    Dp.
    No. of Shoes
    Included
    Mounting Hardware
    Included
    Each
     
    Galvanized Steel
    1 3/8"3"2Yes8016T1000000
     

    Plywood Scaffold Planks

    Image of Product. Front orientation. Scaffold Planks. Plywood Scaffold Planks.
    Image of Attribute. Side1 orientation. Contains Annotated. Scaffold Planks. Plywood Scaffold Planks.
    The most commonly used and cost-effective planking for scaffolding walkways. Install three of these planks side-by-side to create a full platform atop standard 5 ft. wide scaffold frames. Hooks with a 2" opening at each end secure these planks to end frames. Their plywood walking surface can be replaced with standard 5/8" thick plywood when worn.
    Note: Length is measured from center-to-center of end hooks.
    Note: Planks meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
    Rail
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Plank
    Tread
    Ht.
    Material
    Wt.,
    lb.
    Assembly
    Features
    Specs. Met
    Each
    719"4"1,000Smooth4"Aluminum
    		34Assembled2" End HooksANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T160000000
    819"4"750Smooth4"Aluminum
    		42Assembled2" End HooksANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T17000000
    1019"4"1,000Smooth4"Aluminum
    		46Assembled2" End HooksANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T18000000

    Plywood Scaffold Planks with Access Door

    Image of Product. Front orientation. Scaffold Planks. Plywood Scaffold Planks with Access Door.
    Image of Attribute. Side1 orientation. Contains Annotated. Scaffold Planks. Plywood Scaffold Planks with Access Door.
    Safely climb inside your scaffold when surrounding space is tight. These planks have an access door that swings open to reach your work platform. They’re made of plywood—the most commonly used and cost-effective planking material for scaffolds. Hooks at each end secure these planks to end frames. Length is measured from center-to-center of the end hooks.
    Note: Planks meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Use an additional plank (sold separately) to create a platform that spans a standard 5 ft. wide scaffold. They do not include an access door.
    Scaffold Planks
    Additional
    Planks
    Rail
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Plank
    Tread
    Ht.
    Material
    Wt.,
    lb.
    Assembly
    Features
    Specs. Met
    Each
    Each
    728"3 1/2"1,200Smooth3 1/2"Aluminum
    		43Assembled2" End Hooks, Access DoorANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.4518104N1300000008104N110000000
    1028"4 1/2"1,100Smooth4 1/2"Aluminum
    		55Assembled2" End Hooks, Access DoorANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.4518104N140000008104N12000000

    Modular Work Platforms

    Image of System. Components Sold Separately. Front orientation. Contains Annotated. Work Platforms. Modular Work Platforms.

    Components Sold Separately

    Stack platforms vertically and connect them horizontally to create various sizes and configurations. They have an open-grid design that allows liquids to drain and debris to fall through.
    Ramps
    Image of Product. Front orientation. Work Platforms. Modular Work Platforms, Ramps, Straight.
    Image of Product. Front orientation. Work Platforms. Modular Work Platforms, Ramps, Corner.

    Straight

    Corner

    Ramps create a smooth transition for hand trucks and carts to roll onto the platform. They connect to base sections and add-on height sections with two horizontal connectors (sold separately).
    Straight—Use straight ramps along the sides and ends of the platform.
    Corner—Use corner ramps to connect two straight ramps and wrap around the entire platform edge.
    Specifications Met—Work platforms and ramps meet OSHA and Cal/OSHA dimensional and construction standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe setup and operating practices.
    No. of
    Levels
    Lg.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Color
    Assembly
    Specs. Met
    Each
    Grit-Coated Wood
     
    Straight
    12 ft.10"2 7/8"250Black/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T104000000
    13 ft.10"2 7/8"500Black/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T10500000
    15 1/2 ft.10"2 7/8"250Black/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T106000000
    22 ft.1 1/2 ft.5 1/2"750Black/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T10800000
    23 ft.1 1/2 ft.5 1/2"250Black/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T109000000
    25 1/2 ft.1 1/2 ft.5 1/2"750Black/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T111000000
    32 ft.2 1/2 ft.8 1/8"750Black/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T113000000
    33 ft.2 1/2 ft.8 1/8"750Black/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T114000000
    35 1/2 ft.2 1/2 ft.8 1/8"750Black/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T115000000
     
    Corner
    110"10"2 7/8"Not RatedBlack/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T10700000
    21 1/2 ft.1 1/2 ft.5 1/2"Not RatedBlack/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T11200000
    32 1/2 ft.2 1/2 ft.8 1/8"Not RatedBlack/YellowAssembledCal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.45181905T116000000
     
    Connectors
    Pkg.
    Qty.
    Pkg.
    Horizontal Connectors481905T82000000
    back to top