A series of bulb heads are attached to a power cord to provide overhead lighting for jobsites. The cord has a plug on one end and a female connector on the other end, so you can connect multiple strings to illuminate larger areas. These lights have plastic-coated steel guards to protect the bulbs. Use them with medium-base, screw-in LED bulbs.

Lights with a NEMA L5-20 plug turn and lock together for a secure connection.

For lights that are 50 ft. long, use up to a 30W bulb when connecting multiple strings. For lights that are 100 ft. long, use up to a 15W bulb when connecting multiple strings.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors. They have multiple heads, so you can light large areas. Daisy chain multiple strings together to cover an even larger area.

Style C have additional LEDs on the back which bounce light off the ceiling to reduce glare. Each head has at least one loop on the back for easy mounting.

Style D are built the toughest to withstand extreme weather. You can use them in temperatures as low as -40° F and plunge them 3 ft. under water, and they’ll still work. These lights not only carry one of the toughest IP ratings but also the top NEMA rating for outdoors and use near oil and coolant. They cast light at a 200° angle, illuminating a broad area.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1. Their housing contains fire and sparks, so they don’t ignite what’s in your environment. They’re often used in refineries, mines, and paint booths. Rated IP66, they’re also dust tight and sealed against sprays of water such as those used in washdowns. Since each head weighs less than 2 lbs., they’re easy to hang overhead. Each head has two straps for mounting on pipes, beams, or other surfaces. For more precise control over where the light is directed, add mounting clamps (sold separately). One clamp is required for each head.

These lights come with a standard three-prong plug, so electrical connections must be made outside of the hazardous environment. Alternatively, you can add a hazardous location plug.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

No need for wiring—these lights plug into a standard wall outlet. Also known as shop lights, they suspend from your ceiling or can be surface mounted with the included hardware. Their smooth, frosted lens disperses light and reduces glare. Since the lens is polycarbonate, these lights stand up to bumps. ETL listed for use in damp locations, they also withstand humidity and moisture.

Style A have a slim profile so they fit in narrow spaces.

Styles B-D can be chained together by plugging their power cord into the power outlet on the previous light. Style B save energy by using a motion sensor to turn on only when the room is occupied. Adjust everything from brightness to sensor range to timer duration with the included remote. Style C are the brightest plug-in ceiling light, so they’re ideal for large areas.

Style E have three different light appearance settings, so you can adjust them to match other lights nearby. Plug them in or hardwire them into an outlet box. They can be plugged directly to the previous light to create a continuous strip of light, or spaced 12" apart with the included connecting cord.

Neutral lights are often found in workspaces. Cool lights highlight white and blue tones. This is ideal for inspection areas, workshops, and other areas that require high visibility. Warm lights have a yellow tone similar to incandescent lights.

These fixtures disperse light from the sides as well as the bottom to produce ambient lighting ideal for indoor spaces such as offices and storage rooms. Rated for use in damp locations, these lights withstand humidity and moisture. All have a lens that disperses light evenly. Lights can be hardwired to operate on any of the voltages listed.

Those with a neutral light appearance emit a neutral white light often found in workspaces. Others with a neutral and cool light appearance have a selectable light appearance so they can emit neutral or cool light.

Add suspension hardware (sold separately) to hang lights from the ceiling. Suspension hardware for style A includes two wire rope slings with hooks and two wire rope clamps. No tools required—adjust the length and tighten clamps to secure. Suspension hardware for style B includes a mounting plate, an adjustable cable assembly, and a feed cord with three wire leads.

Also known as pendant lights, these fixtures hang from a cord. They work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Also known as channel lights, the ends of these fixtures can be wired together to create long rows of lights to illuminate indoor workspaces such as offices and workshops. Rated for use in damp locations, these lights withstand humidity and moisture. They have built-in LEDs, which last longer, are more efficient, and generate less heat than other light technologies. They emit a neutral white light often found in workspaces. Lights can be hardwired to operate on any of the voltages listed.

Add suspension hardware (sold separately) to hang lights from the ceiling. Includes two wire rope slings with hooks and two wire rope clamps. No tools required—adjust the length and tighten clamps to secure.

Light up spaces that have no electrical connection or are difficult to wire, such as sheds and closets. Pop these lights into the included magnetic mounting brackets or hang them by their hooks—they’re easy to remove when it’s time to charge. To save battery, they have a motion sensor, so they only light up when they detect movement. They emit a neutral white light through a clear lens, providing bright, focused lighting so you can quickly find what you need. The lens is made of polycarbonate for impact resistance. UL listed for use in damp locations, these lights can handle humidity and moisture.

These lights cannot be sold to Canada due to energy efficiency requirements.

Link these lights together to create different shapes with a sleek look. Also known as slot lights, they’re often found hung from, mounted to, or recessed into ceilings in offices and cafeterias. Any shape you form will be lit up continuously because the L, tee, and X connectors (sold separately) light up. Straight connectors (sold separately) link two lights together from the inside. There’s no need for tools for any connections. Remove the end panels, push together the electrical cables, and snap the light in place. You can link up to 32 feet of lights together with a single power connection. These lights include all necessary hardware for mounting.

Choose between a warm or neutral light appearance on the power supply to match existing lights. Each LED is inspected to make sure there are no visible differences in temperature and brightness, so you can combine multiple lights within the same space.

Suspension lights can send up to half their light upward to reduce glare, prevent eye strain, and make your space appear larger. Use them against a white ceiling for the best effect.

Maximize the light that reaches your shelving. Often used in storage rooms and warehouse rack rows, these lights have reflectors that direct all light downwards from ceilings up to 24 ft. high. CSA certified for damp locations, they withstand humidity and moisture.

Neutral lights are often found in workspaces. Cool lights highlight white and blue tones. This is ideal where you need high visibility, such as inspection areas.

Add suspension hardware to hang lights from the ceiling. Includes two wire rope slings with hooks and two wire rope clamps. No tools required—adjust the length and tighten clamps to secure.

Add connectors to join multiple lights together in a straight line. Each joint between two lights requires two connectors.

Emergency backup batteries meet UL 924, which means they’ll power one light for up to 90 minutes if the power goes out. Install them inside the fixture housing. They include a manual test button which you mount on the underside of the light. They cannot be sold to California.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction. They have a rubber lip that molds around bulbs to form a water-resistant seal.

With a lower profile design than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving. Use them in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 40 ft. high. Rated for use in damp locations, these lights withstand humidity and moisture. They can be hardwired to operate on any of the voltages listed.

Style A and C lights require suspension hardware (sold separately), which includes two wire rope slings with hooks and two wire rope clamps. No tools required—adjust the length of the suspension hardware and tighten the clamps to secure. Style B lights come with suspension hardware: two V-hanger brackets and two 36 in. chains.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than fluorescent lights. They emit a neutral white light often found in workspaces. All have a lens that disperses light evenly.

Lights without bulbs work with tubular fluorescent bulbs (sold separately).

Lights with an aluminum housing are lightweight and resist corrosion better than those with a steel housing. Lights with a steel housing are more durable than lights with an aluminum housing.

Also known as grow lights, these lights encourage growth in herbs, flowers, and other plants indoors. They have three color settings to optimize your plants’ development from seedling onward. Blue light in the early stages enhances photosynthesis and establishes strong roots. White light during the vegetative stages makes it easier to see the plants and monitor growth. Red light in the later stages supports flowering and fruiting. Easily switch between each color or combine colors when you have plants at different stages. ETL listed for use in damp locations, these lights withstand humidity and moisture. You can link multiple lights together in a circuit to simplify wiring.

Styles A and B mount to the ceiling or can be suspended.