Step up to assembly areas, conveyor lines, and other workstations for a better working height. These platforms have legs you can turn to raise and lower them.

Made of aluminum, these work platforms are lighter in weight than steel platforms, so they’re easier to move from job to job. They’re lined with soft vinyl foam to ease the strain of standing for long periods.

Maintain equal spacing when adjusting the overall height of these platforms. The distance between the floor and the first step is always the same between steps to meet OSHA requirements.

Made of 304 stainless steel, these platforms withstand wet environments and repeated washdowns without corroding. A serrated platform prevents slipping and allows liquids and debris to pass through.

Create a level and stable place to stand when working on stairs, ramps, and curbs.

Equipped with four casters, these platforms are easy to move between work areas. When you stand on these platforms, the spring-loaded casters automatically retract for a stable surface.

Reduce strain from standing on work platforms for long periods—these platforms have vinyl foam padding for cushioning. Spring-loaded casters make them easy to move between work areas, then retract when you step on the platform to keep you steady while working.

Configure these general purpose work platforms to fit your application.

Install these platforms for easy access to elevated areas.

Transform your forklift into an elevated work platform.

Create extra workspace to safely and efficiently load, unload, and secure items on a flatbed trailer. These platforms add space for standing and moving material when the trailer is full.

Get a secure and stable step up with these standard step stools.

Grip the handrail of these stools to keep steady. Rubber-coated steps prevent slipping.

Fold for easy transport and storage.

With spring-loaded casters, these step stools are easy to move between work areas.

Fold these step stools for easy transport and storage. They meet Fed. Std. Class 100 and ISO Class 5 clean room requirements.

Designed for use in clean rooms, these step stools with a handrail are also used in other sanitary environments such as food-processing and pharmaceutical plants.

Fold these scaffolds for easy transport and storage.

Turn the winch on these scaffolds to adjust the platform height from two to eleven feet in 6" increments.

Even if your surface isn't level, your scaffold can be—the end frames on these scaffolds adjust independently so you can set each side at a different height.

Move these scaffolds between work areas without climbing down from the platform. They have a pair of motorized wheels that you control with a joystick.

Create catwalks, bridges, gangways, and mezzanines by combining these planks, guardrails, and toeboards.

The most commonly used and cost-effective planking for scaffolding walkways.

Adjust the length of these planks to create a work platform on ladder jacks, trestle ladders, and other supports.

With a tripod base and adjustable legs, these stands help you create a stable, level work platform on stairs, slopes, and uneven ground.

Swap these jacks with the base plates on your scaffold to create a level foundation on uneven ground.

Aluminum is lighter than steel and stainless steel, making these ladders easier to roll between work areas.

Ladders are shipped unassembled to save on freight costs.

Tilt these ladders to roll them on their wheels. When you set them upright again, the wheels lift off the floor to keep them stationary while in use.

Made of 304 stainless steel, these ladders are more corrosion resistant than steel and aluminum ladders. They withstand wet environments and repeated washdowns.

While in use, wheels retract and the cup shoes rest directly on the floor to prevent movement.

A 50° incline is more gradual than standard ladders, so it's easier to climb and descend.

Picking and putting away material just got easier. Ladders have three shelves with raised edges that each hold 70 lbs.

With a work platform that extends beyond the base, these rolling ladders allow you to access hard-to-reach areas, such as the top of large tanks and heavy machinery. Also known as cantilever ladders.

Get close to your work even when pipes or other objects are in the way. With no horizontal braces, these ladders can straddle obstructions.

With a 1,000 lb. capacity and storage supports on the base, these ladders can store tools and supplies as well as support personnel.

No need to balance on narrow rungs—these step ladders have a large platform to keep you comfortable while you work. They also have a guardrail, so they’re safer than standard step ladders.

With a large platform and a guardrail, these ladders are safer and more comfortable to work on than standard ladders. Casters in the base let you wheel them between tasks.

Tilt these stairs sideways to roll them between work areas.

Set at a steeper angle than our other crossover bridges, these bridges require less floor space.

Use these standard crossover bridges to walk over conveyors, machines, and pipes.

Move these bridges as you update your facility layout. Unlike other crossover bridges, they do not need to be bolted to the floor. Use them to walk over pipes and conveyors.

Flip these steps down when you need them and fold them up when you don't.

Add a hand- or foothold for easier access to your vehicle or equipment.