We will reply to your message within an hour.
Folding legs and a carrying handle make these lightweight platforms easy to take anywhere.
Raise and lower the leg height on these standard platforms to meet different workers' requirements.
Platforms are covered with a vinyl foam mat to provide comfort and reduce fatigue.
Maintain equal spacing when you adjust the overall height. The distance between the floor and the first step is always the same as the distance between the steps to meet OSHA requirements.
Stack platforms vertically and connect them horizontally to create various sizes and configurations.
These platforms are nonconductive fiberglass.
Configure these general purpose work platforms to fit your application.
These platforms are nonconductive fiberglass. Configure them to fit your application.
Install these standard work platforms for easy access to elevated areas.
Access elevated areas with these platforms that meet Fed. Std. Class 100 and ISO Class 5 clean room requirements.
Create additional workspace to safely and efficiently load, unload, and secure items on a flatbed trailer.
Transform your forklift into an elevated work platform.
Prevent workers from falling off the sides while loading and unloading a flatbed trailer.
These scaffolds provide the space and height to complete elevated projects that most work platforms can't reach.
Fold these scaffolds for easy transport and storage.
Turn the winch on these scaffolds to adjust the platform height from two to eleven feet in 6" increments.
Even if your surface isn't level, your scaffold can be—the end frames on these scaffolds adjust independently so you can set each side at a different height.
These steel scaffolds provide the space and height to complete elevated projects that most work platforms can't reach.
Aluminum is a good choice for damp areas and outdoor use.
These plywood planks have hooks on the ends that fit over scaffold tubing.
For use with ladder jacks, trestle ladders, and walkways, adjust the length of these planks in 12" increments.
Create catwalks, bridges, gangways, and mezzanines by combining these planks, guardrails, and toeboards.
Also known as ladder jacks, these supports hold a plank between two straight or extension ladders to create a scaffold.
These ladders have movable sections that extend and collapse into one another so you can adjust them to the height you need. Configure them into step ladders, straight ladders, stairwell ladders, or scaffolding stands.
Safely climb and stand on truck tires to perform inspections and maintenance.
Rollers support and help guide material into machinery.
Arms are long and at a wide angle to support pipe from 4" to 36" in diameter.
Place stands on a work surface to position pipe while machining.
Ball transfers allow movement in any direction so you can turn material without lifting it.
Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.
A lower shelf provides additional storage space. The durable steel top won't warp or splinter.
A lower shelf provides additional storage space. Often used in laboratories, these tables stand up to repeated washdowns and resist damage from grease and chemicals.
Without a shelf, these tables provide room to pull up a stool or chair. They withstand chemicals, grease, and repeated washdowns for use in laboratories and food-processing areas.
The wood top on these tables is nonconductive, resists impact, and can be sanded and refinished.
Also known as balance tables, these marble tables provide superior vibration control for sensitive measuring equipment.
With a thick steel frame and welded construction, these tables have a capacity of at least 10,000 lbs.
With a flatness tolerance of 0.002" per foot, these tables provide an accurate reference surface for layout and inspection work. They have a thick steel frame and welded construction to support 35,000 lbs.
Welded for strength and stability, these tables support 3,000 to 5,500 lbs.
With a flatness tolerance of 0.002" per foot, these 24" high tables provide an accurate reference surface for layout and inspection work. They have a thick steel frame and welded construction to support 35,000 lbs.
With a thick steel frame and welded construction, these tables have a capacity of 10,000 lbs. Use them to elevate machinery and equipment 24" from the floor.
These durable tables won't warp or splinter. Use them to elevate machinery and equipment up to 24" from the floor.
Often used in laboratories, these tables stand up to repeated washdowns and won't corrode from grease and chemicals. Use them to elevate machinery and equipment up to 24" from the floor.
The wood top is nonconductive as well as impact and chemical resistant. It can be sanded and refinished. Use these tables to elevate machinery and equipment 24" from the floor.
These durable tables won't warp or splinter. They can be configured at a custom height.
Often used in laboratories and food-processing areas, these tables withstand repeated washdowns and resist damage from grease and chemicals. They can be configured for either seated or standing tasks.
Support 3,000 to 5,000 lbs. with these welded tables. They can be configured for either seated or standing tasks.
With a thick steel frame and a capacity of at least 10,500 lbs., these welded tables are our strongest and most durable adjustable-height tables. They can be configured for either seated or standing tasks.
Adjust these tables from 18" to 24" to customize the height of machinery and equipment.
Pull metal particles from grinding, cutting, and finishing workpieces out of the air to avoid breathing them and creating sparks in your work area.
Keep sawdust and other particles out of the air while drilling, sanding, and finishing wood products. Air blowers pull particles into the table through holes in the surface, making sure you don't breathe them.
Raise or lower these tables to a comfortable working height.
Fold the legs and use the handle to carry these workbenches with one hand.
The sloped top, drainage hole and plug, and drain pan contain spills when working with fluids.
Choose a workbench and then add any of the optional accessories. All workbenches come with a support brace and have legs with knockouts in the front and back to accept duplex electrical outlets.
Keyhole slots in the legs allow you to adjust the height of these workbenches in 1 1/2" increments.
These workbenches have plastic frames that won't rust or dent.
To keep work from falling off the top, these workbenches have a backstop and side stops.
These workbenches are dent and rust resistant.
These workbenches have bases with a combination of drawers and doors that offer plenty of storage options for tools and parts.
For added security, drawers are concealed behind padlockable doors.
At 24" wide, these compact workbenches provide storage and a work surface even when space is limited.
Start with the workbench and then customize the interior by adding drawers and shelves.
Often used in laboratories and food-processing plants, these workbenches resist corrosion.
These workbenches range in size from 32"-42" wide.
Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.
Reinforced for strength and durability, these workbenches can hold twice the weight of our standard large-capacity cabinet workbenches.
At 48" wide and greater, these workbenches have a larger work surface and more storage than our standard cabinet workbenches.
Mount these workstations on a flat vertical surface to create a steady horizontal surface for writing, typing, or tinkering.
Adjust both the slope and height of the top to a comfortable position for drawing, drafting, and writing.
Switch between sitting and standing while working.
Turn the hand wheels to raise the load and tilt it up to 30° for a more ergonomic angle.
The hand crank on these tables has two speeds for fast and slow adjustment.
An extra-long, reinforced tabletop gives you plenty of room for oversized loads.
These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.
For easy access to material, the tabletop rotates 360° and locks in any position.
The top extends beyond the base for easier access to tight spaces and bench tops.
A battery-operated motor and a hydraulic pump do the work for you; they lift loads with the push of a button.
An electric motor and a hydraulic pump lift loads with the push of a button.
An extra-large tabletop provides plenty of room for oversized loads.
The turntable rotates to reduce reaching.
These tables are compact, yet provide the lifting capacity of standard lift tables.
The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier.
These tables have a foot lever and hydraulic pump to raise the load.
A hydraulic pump and an air-driven motor do the work for you.
Choose your table based on capacity, then choose the type of control that best suit your application.
These tables come ready to operate.
An air cylinder automatically returns the stand to your set height as you add or remove parts of the load.
Use one to three springs (included) to automatically keep pallets at a convenient height.
Hold pallets at one of three fixed heights.
Organize all your 3D printing tools and supplies in one mobile workstation.
Keep multimeters, oscilloscopes, and other instruments at a convenient viewing angle and height.
Mount your bench-top air cleaner hood at a comfortable height for working.
Take your Universal Robots arm to new heights—these bases move up and down to extend your robot’s vertical reach for high and low stacking jobs.
Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations.
These stations are a portable working home for your robot arm.
Raise and lower your robot arm on these workstations, placing them at the right height for each task.
Mix and match a variety of components to create a custom workstation for moving parts in and out of CNC machines or other similar applications.
Extend the horizontal reach of your Universal Robots’ arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC.
Secure your robot arm to benches, frames, or other surfaces with these base mounts.
Position parts exactly where they’re needed for workers, robots, and other machines to easily access them.
These smooth, solid shelves are corrosion resistant and easy to clean.