Stubby Combination Wrenches
 6-Point Box Opening |  |
 |
When working in tight spaces, these short wrenches fit where others can't. Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact.
Polished wrenches have a mirror-like finish.
For technical drawings and 3-D models, click on a part number.
Two-Head Open-End Wrenches
Wrenches with square openings provide the best grip on square fasteners.
For technical drawings and 3-D models, click on a part number.
Dull Chrome Plated | ||||
|---|---|---|---|---|
| Drive Size | Opening Angle | Material | Each | |
Metric | ||||
Rounded Openings | ||||
| 5.5 mm × 7 mm | 15° | Steel | 0000000 | 000000 |
75° Angle Tight-Clearance Open-End Wrenches
One head is angled for access to hard-to-reach fasteners. These slim wrenches fit into tight spaces and around thin fasteners. They are also known as ignition wrenches.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Appearance | Each | |
| 5.5 mm | 3" | 15° × 75° | 1/8" × 7/64" | Chrome-Plated Steel | Dull | 0000000 | 000000 |
Miniature Open-End Wrenches
Sized for working on small equipment, these wrenches are 4 1/8" long with a slim head and handle.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Finish | Each | |
Hex Opening | |||||||
|---|---|---|---|---|---|---|---|
| 5.5 mm | 4 1/8" | 30° | 1/16" | Steel | Black Oxide | 0000000 | 00000 |
75° Angle Tight-Clearance Open-End Wrench Sets
One head is angled 75° for access to hard-to-reach fasteners. These slim wrenches fit into tight spaces and around thin fasteners. They are also known as ignition wrenches.
For technical drawings and 3-D models, click on a part number.
| Sizes Included  | Overall Lg. | Opening Angle | Material | Appearance | Container Type | Each | |
Metric Wrench Sets | |||||||
|---|---|---|---|---|---|---|---|
16-Piece Sets | |||||||
| 3.2 mm 4 mm 5 mm 5.5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm | 2 3/4"-5 1/2" | 15° × 75° | Chrome-Plated Steel | Dull | Fabric Roll-Up Pouch | 0000000 | 0000000 |
Miniature Open-End Wrench Sets
Sized for working on small equipment, these wrenches are 4 1/8" long with a slim head and handle.
| Sizes Included | Overall Lg. | Opening Angle | Material | Finish | Container Type | Each | |
Metric Wrench Sets | |||||||
|---|---|---|---|---|---|---|---|
8-Piece Sets | |||||||
| 2.5 mm 3 mm 3.2 mm 4 mm 5 mm 5.5 mm 6 mm 7 mm | 4 1/8" | 30° | Steel | Black Oxide | Plastic Pouch | 0000000 | 000000 |
Stubby Open-End Wrench Sets
When turning fasteners in small spaces, these short wrenches fit where others can't.
For technical drawings and 3-D models, click on a part number.
| Sizes Included | Overall Lg. | Opening Angle | Material | Appearance | Container Type | Specifications Met | Each | |
Metric Wrench Sets | ||||||||
|---|---|---|---|---|---|---|---|---|
6-Piece Sets | ||||||||
| 3.2 mm × 5.5 mm 4 mm × 5 mm 6 mm × 7 mm 8 mm × 9 mm 10 mm × 11 mm 12 mm × 13 mm | 2 3/4"-4 3/8" | 15° | Chrome-Plated Steel | Dull | Plastic Roll-Up Pouch | ISO 3318 | 0000000 | 000000 |
6-Point Sockets
Achieve the best possible grip on hex fasteners and prevent rounding.
For technical drawings and 3-D models, click on a part number.
6-Point Flex Sockets
Pivot the head to access fasteners from an angle. The hex shape provides the best possible grip on hex fasteners and prevents rounding.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | OD | Material | Each | |
Metric | |||||
|---|---|---|---|---|---|
1/4" Square Drive | |||||
| 5.5 mm | 1 1/4" | 31/64" | Chrome-Plated Steel | 0000000 | 000000 |
12-Point Sockets
6-Point Impact Sockets
Achieve the best possible grip on hex fasteners and prevent rounding. These sockets are made to withstand the high torque and force of impact tools.
For technical drawings and 3-D models, click on a part number.
12-Point Flex Impact Sockets
Pivot the head to access fasteners from an angle. These sockets have a 12-point shape that quickly positions on hex fasteners. They are made to withstand the high torque and force of impact tools.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | OD | Material | Finish | Each | |
Metric | ||||||
|---|---|---|---|---|---|---|
1/4" Square Drive | ||||||
| 5.5 mm | 1 1/4" | 5/8" | Steel | Black Oxide | 00000000 | 000000 |
Fastener-Holding Power Sockets
A magnet holds the fastener securely enough to drive self-tapping screws. These sockets have a hex shape that grips hex fasteners and prevents rounding. They are for use with nonimpact power tools in high-volume production and assembly. Sockets are not for use with impact tools.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | OD | Material | Each | |
1/4" Square Drive | |||||
|---|---|---|---|---|---|
| 5.5 mm | 7/8" | 1/2" | Steel | 00000000 | 000000 |
Premium 6-Point Socket Sets
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish. The hex shape grips hex fasteners and prevents rounding.
| No. of Pieces | Components Included | Includes | Each | |
1/4" Square Drive | ||||
|---|---|---|---|---|
| 16 | 12 Sockets 2 Drive Tools 1 Extension 1 Adapter | Standard Sockets: 4 mm, 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm 6" Long Socket Screwdriver Handle 5 1/4" Long Ratchet Wrench 2" Long Extension 1 7/16" Long Flex Adapter | 0000000 | 0000000 |
| Foam Socket Organizer for 24 Piece 3/8" Square Drive Size Set | 0000000 | Each | 000000 |
Economy 12-Point Socket Sets
Suitable for occasional maintenance work, these sets are imported. The 12-point shape quickly positions on hex fasteners.
For technical drawings and 3-D models, click on a part number.
| No. of Pieces | Includes | Each | |
1/4" Square Drive | |||
|---|---|---|---|
| 12 | Standard Sockets: 4 mm, 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm | 00000000 | 000000 |
L-Keys
Turn fasteners from either end and reach into tight spots.
For technical drawings and 3-D models, click on a part number.
L-Key Sets
Sets include an assortment of keys. These simple tools turn fasteners from either end and reach into tight spots.
| Number of Pieces | Includes | Material | Finish | Container Type | Each | |
Hex | ||||||
|---|---|---|---|---|---|---|
Long Length | ||||||
| 15 | 1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/8" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 3/4" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 1/8" O'all Lg.) 6 mm Hex L-Key (5 3/4" O'all Lg.) 7 mm Hex L-Key (5 7/8" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.) | Steel | Black Phosphate Coated | Plastic Caddy | 000000 | 000000 |
Ball-End L-Keys
When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places.
For technical drawings and 3-D models, click on a part number.
Length | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall | Long Leg | Short Leg | Max. Access Angle | Material | Finish | Each | |
Hex | ||||||||
| 5.5 mm | 5 3/16" | 4 15/16" | 1 3/16" | 25° | Steel | Black Phosphate Coated | 0000000 | 00000 |
Ball-End L-Key Sets
These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. Use to turn screws in hard-to-reach areas.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Max. Access Angle | Material | Finish | Container Type | Each | |
Hex | |||||||
|---|---|---|---|---|---|---|---|
Long Length | |||||||
| 15 | 1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 11/16" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 3/16" O'all Lg.) 6 mm Hex L-Key (5 3/4" O'all Lg.) 7 mm Hex L-Key (5 13/16" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.) | 25° | Steel | Black Phosphate Coated | Plastic Caddy | 0000000 | 000000 |
Ball-End High-Visibility L-Key Sets
These assorted keys have a ball end that allows angled entry to turn screws in hard-to-reach areas. The bright finish makes them easy to see and less likely to be misplaced.
Gold-plated keys resist corrosion.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Max. Access Angle | Material | Color | Container Type | Each | |
Long Length | |||||||
|---|---|---|---|---|---|---|---|
| 15 | 1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 11/16" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 3/16" O'all Lg.) 6 mm Hex L-Key (5 3/4" O'all Lg.) 7 mm Hex L-Key (5 13/16" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.) | 25° | Gold-Plated Steel | Gold | Plastic Caddy | 0000000 | 000000 |
| 15 | 1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 3/4" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 5.5 mm Hex L-Key (5 1/8" O'all Lg.) 6 mm Hex L-Key (5 3/4" O'all Lg.) 7 mm Hex L-Key (5 7/8" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.) | 25° | Painted Steel | Blue | Plastic Caddy | 000000 | 00000 |
Ball-End Screwdrivers
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas. These screwdrivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.
For technical drawings and 3-D models, click on a part number.
Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Max. Access Angle | Material | Finish | Handle Material | Each | |
Hex | |||||||||
| 5.5 mm | 4 5/16" | 5" | 7/32" | 25° | Steel | Black Phosphate Coated | Plastic | 0000000 | 00000 |
Bit Screwdrivers
Insert a bit into the shaft and a magnet holds it in place.
Ultra-grip drivers have a multicomponent handle that provides comfort and the best possible grip for achieving maximum torque. These drivers come with double sided bits.
Shaft | Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Sizes | Sizes Included | O'all Lg. | Lg. | O'all Wd. | Shaft | Bit | Handle | Grip Style | Features | Each | |
For 1/4" Bit Hex Shank Size | |||||||||||
| 26 | Phillips: No. 0, No.1, No. 2, No. 3 Pozidriv: No. 1, No. 2 Slotted: 3mm, 4mm, 4.5mm, 5.5 mm, 6mm, 6.5mm Square: No. 0, No. 1, No. 2, No. 3 Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30 | 9" | 3 1/2" | 3/8" | Steel | Steel | Plastic | Ultra Grip | Pop-up bit storage inside tool | 0000000 | 000000 |
Precise-Control Screwdriver Sets
Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
| 50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Hex Screwdrivers (Inch): 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers (Metric): 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm 5 3/4" Lg. Chip Lifter | Steel | Chrome Plated | Plastic | Metal Frame | 00000000 | 0000000 |
Ball-End Driver Shafts
Create your own tool by attaching these shafts to a handle, or use with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Max. Access Angle | Material | Finish | Each | |
Hex | ||||||
|---|---|---|---|---|---|---|
| 5.5 mm | 6 1/8" | 25° | Steel | Black Phosphate Coated | 0000000 | 00000 |