Combination Wrenches
 12-Point Box Opening |  |
 |
Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact.
For technical drawings and 3-D models, click on a part number.
Box End | Open End | Black Oxide | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Head Offset Angle | Head Thick. | Opening Angle | Head Thick. | Material | Specifications Met | Each | |
12-Point Box Opening | |||||||||
| 75 mm | 34" | 15° | 1 7/8" | 15° | 1 3/8" | Steel | ASME B107.100 | 00000000 | 0000000 |
Open-End Wrenches
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Finish | Specifications Met | Each | |
Metric | ||||||||
|---|---|---|---|---|---|---|---|---|
Rounded Opening | ||||||||
| 75 mm | 23 3/8" | 15° | 13/16" | Steel | Black Phosphate Coated | DIN 894 | 0000000 | 0000000 |
Striking Open-End Wrenches
Strike the handle with a hammer to break stuck fasteners free. These are also known as slugging wrenches.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Each | |
Rounded Opening | ||||||
|---|---|---|---|---|---|---|
Metric | ||||||
| 75 mm | 14 3/4" | 15° | 1 3/16" | Steel | 0000000 | 0000000 |
Spanner Sockets
For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts. These sockets require less clearance around bearings than standard hook spanner wrenches, so they’re good in tight spaces. Use them with a square-drive wrench handle or a ratchet wrench; they’re not for use with impact wrenches.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Length | OD | For Nut Thread Size  | For Bearing Nut Specifications Met | For Nut Diameter | Bolt Clearance Depth | Material | Each | |
4-Pin | |||||||||
|---|---|---|---|---|---|---|---|---|---|
1/2" Square Drive | |||||||||
| 75 mm | 102mm | 91mm | M55 | ISO 2982-2 | 75mm | 65mm | Steel | 00000000 | 0000000 |
6-Point Impact Sockets
Achieve the best possible grip on hex fasteners and prevent rounding. These sockets are made to withstand the high torque and force of impact tools.
3/4", 1", and 1 1/2" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
