About Torque Tools
More
L-Keys
Turn fasteners from either end and reach into tight spots.
Torx Plus keys have a star-shaped profile similar to Torx but are not compatible with standard Torx screws.
For technical drawings and 3-D models, click on a part number.
Torque-Control Flag-Handle Keys
Often used to install carbide inserts in cutting tools, these keys have a small handle that prevents you from generating too much torque when turning a fastener.
Torx Plus keys have a star-shaped profile similar to Torx but are not compatible with standard Torx screws.
For technical drawings and 3-D models, click on a part number.
Length | |||||||
|---|---|---|---|---|---|---|---|
| Drive Size | Overall | Shaft | Material | Finish | Handle Material | Each | |
Torx Plus  | |||||||
| IP7 | 3 5/16" | 2" | Steel | Black Phosphate Coated | Rubber | 0000000 | 00000 |
Torque-Control Flag-Handle Key Sets
The assorted keys in these sets have a small handle that prevents you from generating too much torque when turning a fastener. They are often used to install carbide inserts in cutting tools.
Torx Plus keys have a star-shaped profile similar to Torx but are not compatible with standard Torx screws.
| Number of Pieces | Includes | Shaft Lg. | Material | Finish | Handle Material | Container Type | Each | |
Torx Plus | ||||||||
|---|---|---|---|---|---|---|---|---|
| 7 | IP6 Torx Plus Flag-Handle Key (3 5/16" O'all Lg.) IP7 Torx Plus Flag-Handle Key (3 5/16" O'all Lg.) IP8 Torx Plus Flag-Handle Key (3 5/16" O'all Lg.) IP9 Torx Plus Flag-Handle Key (3 5/16" O'all Lg.) IP10 Torx Plus Flag-Handle Key (3 1/2" O'all Lg.) IP15 Torx Plus Flag-Handle Key (3 1/2" O'all Lg.) IP20 Torx Plus Flag-Handle Key (3 1/2" O'all Lg.) | 2" | Steel | Black Phosphate Coated | Rubber | Plastic Stand | 0000000 | 000000 |
Torque-Control Wing-Handle Keys
Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.
Torx Plus keys have a star-shaped profile similar to Torx but are not compatible with standard Torx screws.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | Overall Wd. | Material | Finish | Handle Material | Each | |
Torx Plus | ||||||||
| IP7 | 2 3/4" | 1 7/16" | 1/8" | Steel | Black Oxide | Plastic | 0000000 | 00000 |
Torque-Control Wing-Handle Key Sets
The assorted keys in these sets have a small T-handle that prevents you from generating too much torque when turning a fastener. They are often used to install carbide inserts in cutting tools.
Torx Plus keys have a star-shaped profile similar to Torx but are not compatible with standard Torx screws.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
Torx Plus | |||||||
|---|---|---|---|---|---|---|---|
| 7 | IP6 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP7 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP8 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP9 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP10 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP15 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP20 Torx Plus T-Handle Key (5 7/8" O'all Lg.) | Steel | Black Oxide | Plastic | Metal Stand | 0000000 | 000000 |
Ultra-Grip Screwdrivers
These screwdrivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.
Torx Plus drivers have a star-shaped profile similar to Torx but are not recommended for use with standard Torx screws.
For technical drawings and 3-D models, click on a part number.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Finish | Handle Material | Each | |
| IP7 | 6 1/2" | 2 7/16" | 1/8" | Steel | Chrome Plated | Plastic | 0000000 | 00000 |
Torx-Plus Bits
The six rounded points fit the star-shaped recess of Torx-Plus screws. These bits have a similar profile to Torx but are not recommended for use with standard Torx screws.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
Torx-Plus Bit Sets
The six rounded points fit the star-shaped recess of Torx-Plus of screws. These bits have a similar profile to Torx but are not recommended for use with standard Torx screws.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
| Components Included | Bits Included | Adapters Included | Material | Container Type | Each | |
1/4" Hex Shank Size | ||||||
|---|---|---|---|---|---|---|
| 10 Bits 1 Adapter | Torx Plus: IP7, IP8, IP9, IP10, IP15, IP20, IP25, IP27, IP30, IP40 (1" O'all lg.) | 2 3/8" Lg. Bit Adapter for Power Tools | Steel | Plastic Case | 00000000 | 000000 |
1/4" Hex Shank Size for Power Tools | ||||||
| 10 Bits | Torx Plus: IP6, IP7, IP8, IP9, IP10, IP15, IP20, IP25, IP27, IP30 (2" O'all Lg.) | __ | Steel | Plastic Caddy | 0000000 | 00000 |
Factory-Set Torque Screwdrivers for Carbide Inserts
Ensure carbide inserts are tightened to the correct torque. These tools are factory set to the recommended torque values for each screw size and cannot be adjusted. They signal with an audible click when the set torque is reached. The handle has a contoured ultra grip for comfort.
For technical drawings and 3-D models, click on a part number.
Shaft | Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Torque Setting | Clockwise Accuracy | Torque-Limiting Direction | Overall Lg. | Lg. | O'all Wd. | Shaft | Handle | Grip Style | Each | |
Torx Plus | |||||||||||
ft.-lbs., Nm | |||||||||||
| IP7 | 0.7 ft.-lbs. 0.9 Nm | ±10% | Clockwise | 6 3/4" | 2 9/16" | 7/32" | Steel | Plastic | Ultra Grip | 0000000 | 000000 |