Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

The slim head fits into tight spaces and around thin fasteners.

Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.

One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

Sized for working on small equipment, these wrenches are 4 1/8" long with a slim head and handle.

No need to pull the socket off the tool—push a button to release.

Pivot the head for access to fasteners in tight spots.

Also known as impact drivers, use these tools with impact sockets to break frozen bolts and screws free. Strike with a hammer to tighten and loosen fasteners.

Eliminate the risk of your socket falling while reaching into your workspace with these flex sockets that have an integrated extension.

These sockets fit the nuts found on water and gas valves.

The rounded-corner shape fits over ball joints commonly found in suspension and steering systems in vehicles.

A magnet holds the fastener securely enough to drive self-tapping screws.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

The 12-point shape quickly positions on hex fasteners.

Quickly position these sockets on square fasteners.

Turn 5-point tamper-resistant nuts and bolts often found on water and gas valves.

The short bit on these sockets fits in spaces where height clearance is limited.

These sockets fasten Torx screws often used in vehicles, bicycles, and electronics.

Grip the indentations around the outside of tri-groove fasteners.

Convert from one square drive size to another.

Pivot the head to access fasteners from an angle.

These sockets are made to withstand the high torque and force of impact tools.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Convert from one square drive size to another.

The hole in the middle of these bits fits the security pin in tamper-resistant Torx screws.

Convert from one square drive size to another.

Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

A magnet holds the socket, making changes quicker.

Lock your socket into the extension to prevent accidental disengagement.

Reach a variety of spots by keeping common extension lengths on hand.

Convert your impact socket into a flex socket to access fasteners from an angle.

Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.

Use the pulsing of an air hammer along with the controlled turning of a hand wrench to release stuck fasteners without breaking them.

The handle is covered in plastic for a comfortable grip.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.

The head is offset 45° to provide clearance for reaching over obstructions.

The head is offset 45° to provide clearance for reaching over obstructions.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.

The head pivots to accommodate a range of diameters.

Sets include various sizes of wrenches that are shaped to fit round holes on the circumference of collars, bearings, and other machine tool components.

Hinged for adjustability, these wrenches fit a range of diameters.

Grip the round holes on the face of collars, bearings, and other machine tool components.

Sets include an assortment of keys. These simple tools turn fasteners from either end and reach into tight spots.

These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. Use to turn screws in hard-to-reach spots.

A retaining ring at the tip grips inside the recess to ensure screws won’t fall off.

These assorted keys have a textured grip that provides comfort, slip resistance, and maximum torque. They have a long shaft for reaching into tight spots to turn fasteners.

These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. The textured grip provides comfort, slip resistance, and maximum torque.

The economical choice, these sets include an assortment of keys with a simple loop handle. The long shaft reaches into tight spots and the T-handle provides a good grip for your whole hand when turning fasteners.

The assorted keys in these sets have a small T-handle that prevents you from generating too much torque when turning a fastener. They are often used to install carbide inserts in cutting tools.

A retaining ring on the tip grips inside the recess to hold screws in place. Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.

Sets include an assortment of drivers.

When working in tight spaces, these short drivers fit where others can't.

Bright-colored handles make these tools stand out so they're less likely to be misplaced.

Also known as hollow-tip or parallel ground screwdrivers, the straight slotted tip fills the screw slot better than the tapered tip on standard screwdrivers for more torque and less slippage.

Carry these slim-handled tools comfortably in your pocket.

The ball-end tip allows angled entry to turn screws in hard-to-reach areas. These tools are a scaled-down version of standard changeable-shaft screwdrivers, They're shorter, slimmer, and easy to take with you. Remove and replace the shaft to change the tip size.

Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

Sets include an assortment of drivers with a tip that can be replaced when it becomes worn. Press the rotating end cap on the handle with your palm to apply constant pressure to small fasteners while turning the body of the screwdriver with your fingertips.

Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

When a straight-end key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places.

When working at heights, secure a lanyard to the ring on these tools and prevent drops. Sets include an assortment of keys for turning multiple fastener sizes.