Material Material |
---|
|
Finish Finish |
---|
|
Installed Length Installed Length |
---|
|
Barrel Length Barrel Length |
---|
Flange Diameter Flange Diameter |
---|
For Minimum Material Thickness For MinimumMaterial Thickness |
---|
|
Drill Bit Size Drill Bit Size |
---|
Prong Length Prong Length |
---|
For Maximum Hole Diameter For Maximum Hole Diameter |
---|
|
Barrel Diameter Barrel Diameter |
---|
Flange Thickness Flange Thickness |
---|
Tensile Strength Tensile Strength |
---|
|
More
These inserts have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
Unfinished steel inserts are best for dry environments, since moisture will cause them to rust. They are ready for painting.
Zinc-plated steel inserts are mildly corrosion resistant in wet environments.
Black-oxide steel inserts have a dark surface color and are mildly corrosion resistant in dry environments.
For technical drawings and 3-D models, click on a part number.
Barrel | Flange | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Installed Lg. | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
Steel | ||||||||||
10-32 | 0.352" | 0.243" | 5/16" | 45/64" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 00000 |
1/4"-20 | 0.36" | 0.305" | 5/16" | 3/4" | 0.047" | 5/16" | 5/16" | 100 | 000000000 | 00000 |
1/4"-20 | 0.36" | 0.305" | 5/16" | 1 1/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 0000 |
1/4"-20 | 0.485" | 0.305" | 7/16" | 3/4" | 0.047" | 5/16" | 5/16" | 100 | 000000000 | 0000 |
1/4"-20 | 0.61" | 0.305" | 9/16" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
1/4"-20 | 0.61" | 0.305" | 9/16" | 1 1/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 0000 |
5/16"-18 | 0.438" | 0.39" | 3/8" | 7/8" | 0.063" | 25/64" | 25/64" | 50 | 000000000 | 0000 |
5/16"-18 | 0.559" | 0.37" | 1/2" | 7/8" | 0.059" | 3/8" | 3/8" | 25 | 000000000 | 0000 |
5/16"-18 | 0.688" | 0.37" | 5/8" | 7/8" | 0.055" | 3/8" | 3/8" | 25 | 000000000 | 0000 |
5/16"-18 | 0.688" | 0.39" | 5/8" | 1 1/4" | 0.063" | 25/64" | 25/64" | 10 | 000000000 | 0000 |
5/16"-18 | 0.934" | 0.37" | 7/8" | 7/8" | 0.059" | 3/8" | 3/8" | 25 | 000000000 | 00000 |
1/2"-13 | 0.466" | 0.591" | 3/8" | 1 1/4" | 0.091" | 19/32" | 19/32" | 20 | 000000000 | 00000 |
5/8"-11 | 0.466" | 0.72" | 3/8" | 1 7/16" | 0.091" | 23/32" | 23/32" | 10 | 000000000 | 0000 |
Zinc-Plated Steel | ||||||||||
10-24 | 0.352" | 0.243" | 5/16" | 45/64" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 0000 |
10-32 | 0.352" | 0.243" | 5/16" | 45/64" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 0000 |
1/4"-20 | 0.36" | 0.305" | 5/16" | 3/4" | 0.047" | 5/16" | 5/16" | 100 | 000000000 | 00000 |
1/4"-20 | 0.36" | 0.305" | 5/16" | 1 1/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 00000 |
1/4"-20 | 0.485" | 0.305" | 7/16" | 3/4" | 0.047" | 5/16" | 5/16" | 100 | 000000000 | 00000 |
1/4"-20 | 0.61" | 0.305" | 9/16" | 3/4" | 0.047" | 5/16" | 5/16" | 100 | 000000000 | 00000 |
1/4"-20 | 0.61" | 0.305" | 9/16" | 1 1/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 00000 |
5/16"-18 | 0.438" | 0.37" | 3/8" | 7/8" | 0.055" | 3/8" | 3/8" | 100 | 000000000 | 00000 |
5/16"-18 | 0.559" | 0.37" | 1/2" | 7/8" | 0.059" | 3/8" | 3/8" | 50 | 000000000 | 00000 |
5/16"-18 | 0.688" | 0.37" | 5/8" | 7/8" | 0.055" | 3/8" | 3/8" | 50 | 000000000 | 0000 |
5/16"-18 | 0.688" | 0.39" | 5/8" | 1 1/4" | 0.063" | 25/64" | 25/64" | 10 | 000000000 | 0000 |
5/16"-18 | 0.934" | 0.37" | 7/8" | 7/8" | 0.059" | 3/8" | 3/8" | 25 | 000000000 | 00000 |
3/8"-16 | 0.501" | 0.44" | 7/16" | 1" | 0.063" | 29/64" | 29/64" | 50 | 000000000 | 00000 |
1/2"-13 | 0.466" | 0.591" | 3/8" | 1 1/4" | 0.091" | 19/32" | 19/32" | 10 | 000000000 | 0000 |
5/8"-11 | 0.466" | 0.72" | 3/8" | 1 7/16" | 0.091" | 23/32" | 23/32" | 5 | 000000000 | 0000 |
Black-Oxide Steel | ||||||||||
10-32 | 0.352" | 0.243" | 5/16" | 45/64" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
1/4"-20 | 0.36" | 0.305" | 5/16" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
1/4"-20 | 0.36" | 0.305" | 5/16" | 1 1/4" | 0.047" | 5/16" | 5/16" | 10 | 000000000 | 0000 |
1/4"-20 | 0.485" | 0.305" | 7/16" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
1/4"-20 | 0.61" | 0.305" | 9/16" | 3/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 0000 |
1/4"-20 | 0.61" | 0.305" | 9/16" | 1 1/4" | 0.047" | 5/16" | 5/16" | 10 | 000000000 | 0000 |
5/16"-18 | 0.438" | 0.39" | 3/8" | 7/8" | 0.063" | 25/64" | 25/64" | 25 | 000000000 | 0000 |
5/16"-18 | 0.559" | 0.37" | 1/2" | 7/8" | 0.059" | 3/8" | 3/8" | 10 | 000000000 | 0000 |
5/16"-18 | 0.688" | 0.37" | 5/8" | 7/8" | 0.055" | 3/8" | 3/8" | 10 | 000000000 | 0000 |
5/16"-18 | 0.688" | 0.39" | 5/8" | 1 1/4" | 0.063" | 25/64" | 25/64" | 10 | 000000000 | 0000 |
5/16"-18 | 0.934" | 0.37" | 7/8" | 7/8" | 0.059" | 3/8" | 3/8" | 10 | 000000000 | 0000 |
3/8"-16 | 0.466" | 0.44" | 7/16" | 1" | 0.063" | 29/64" | 29/64" | 10 | 000000000 | 0000 |
1/2"-13 | 0.466" | 0.591" | 3/8" | 1 1/4" | 0.091" | 19/32" | 19/32" | 5 | 000000000 | 0000 |
5/8"-11 | 0.466" | 0.72" | 3/8" | 1 7/16" | 0.091" | 23/32" | 23/32" | 5 | 000000000 | 0000 |
Barrel, mm | Flange, mm | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Installed Lg., mm | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
M4 | 0.7 | 6.95 | 5.2 | 6 | 15 | 0.95 | 5.6 mm | 5.6 mm | 100 | 000000000 | 000000 |
M4 | 0.7 | 8.95 | 5.2 | 8 | 15 | 0.95 | 5.6 mm | 5.6 mm | 100 | 000000000 | 00000 |
M5 | 0.8 | 9.15 | 6.2 | 8 | 17 | 1.15 | 6.4 mm | 6.4 mm | 100 | 000000000 | 00000 |
M6 | 1 | 10.3 | 7.3 | 9 | 19 | 1.3 | 7.9 mm | 7.9 mm | 50 | 000000000 | 0000 |
M6 | 1 | 13.3 | 7.3 | 12.1 | 19 | 1.3 | 7.9 mm | 7.9 mm | 50 | 000000000 | 0000 |
M8 | 1.25 | 12.75 | 10 | 11 | 22 | 1.75 | 9.5 mm | 9.5 mm | 50 | 000000000 | 00000 |
M8 | 1.25 | 16.75 | 10 | 15 | 22 | 1.75 | 9.5 mm | 9.5 mm | 50 | 000000000 | 00000 |
M10 | 1.5 | 14.5 | 11.1 | 13 | 25.4 | 1.5 | 11.5 mm | 11.5 mm | 25 | 000000000 | 0000 |
These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel inserts. They have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
Barrel | Flange | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Installed Lg. | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
6-32 | 0.281" | 0.169" | 1/4" | 1/2" | 0.031" | 11/64" | 11/64" | 10 | 000000000 | 00000 |
8-32 | 0.288" | 0.213" | 1/4" | 1/2" | 0.038" | 7/32" | 7/32" | 10 | 000000000 | 0000 |
10-24 | 0.319" | 0.232" | 9/32" | 3/4" | 0.038" | 15/64" | 15/64" | 10 | 000000000 | 0000 |
1/4"-20 | 0.295" | 0.308" | 1/4" | 3/4" | 0.045" | 5/16" | 0.311" | 10 | 000000000 | 0000 |
1/4"-20 | 0.425" | 0.311" | 3/8" | 3/4" | 0.05" | 5/16" | 5/16" | 10 | 000000000 | 0000 |
1/4"-20 | 0.55" | 0.311" | 1/2" | 3/4" | 0.05" | 5/16" | 5/16" | 10 | 000000000 | 0000 |
5/16"-18 | 0.437" | 0.391" | 3/8" | 7/8" | 0.062" | 13/32" | 13/32" | 10 | 000000000 | 0000 |
5/16"-18 | 0.562" | 0.391" | 1/2" | 7/8" | 0.062" | 13/32" | 13/32" | 10 | 000000000 | 0000 |
3/8"-16 | 0.513" | 0.471" | 7/16" | 1" | 0.075" | 31/64" | 31/64" | 5 | 000000000 | 0000 |
1/2"-13 | 0.591" | 0.591" | 1/2" | 1 1/4" | 0.091" | 19/32" | 19/32" | 1 | 000000000 | 0000 |
Barrel, mm | Flange, mm | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Installed Lg., mm | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||||
M4 | 0.7 | 7.1 | 5.2 | 6.3 | 15 | 0.8 | 1/8" | 1/8" | 10 | 000000000 | 000000 |
M4 | 0.7 | 9.1 | 5.2 | 8.3 | 15 | 0.8 | 1/8" | 1/8" | 10 | 000000000 | 0000 |
M5 | 0.8 | 8 | 6.2 | 7 | 17 | 1 | 5/32" | 5/32" | 10 | 000000000 | 00000 |
M6 | 1 | 7.5 | 7.4 | 6.3 | 19 | 1.2 | 5/16" | 5/16" | 10 | 000000000 | 00000 |
M6 | 1 | 9 | 7.5 | 7.8 | 19 | 1.2 | 5/16" | 5/16" | 10 | 000000000 | 00000 |
M8 | 1.25 | 11 | 10 | 9.5 | 22.2 | 1.5 | 13/32" | 13/32" | 5 | 000000000 | 00000 |
M10 | 1.5 | 13 | 11.4 | 11.5 | 25.4 | 1.5 | 31/64" | 31/64" | 5 | 000000000 | 00000 |
The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water. They have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
Barrel, mm | Flange, mm | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Installed Lg., mm | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
316 Stainless Steel | |||||||||||
M6 | 1 | 7.5 | 7.4 | 6.3 | 19 | 1.2 | 5/16" | 5/16" | 10 | 000000000 | 000000 |
Fewer prongs than other tee nut inserts reduce the risk of splitting hardwood—these inserts have three short prongs. Hammer them into a drilled hole to install. Installed length includes the flange.
Unfinished steel inserts are best for dry environments, since moisture will cause them to rust. They are ready for painting.
Zinc-plated steel inserts are mildly corrosion resistant in wet environments.
Black-oxide steel inserts have a dark surface color and are mildly corrosion resistant in dry environments.
For technical drawings and 3-D models, click on a part number.
Barrel | Flange | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Installed Lg. | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
Steel | ||||||||||
1/4"-20 | 0.235" | 0.305" | 3/16" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 00000 |
1/4"-20 | 0.36" | 0.305" | 5/16" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
1/4"-20 | 0.397" | 0.305" | 1/4" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
1/4"-20 | 0.422" | 0.305" | 3/8" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
1/4"-20 | 0.485" | 0.305" | 7/16" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
1/4"-20 | 0.61" | 0.305" | 9/16" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
Zinc-Plated Steel | ||||||||||
10-24 | 0.602" | 0.243" | 9/16" | 3/4" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
10-32 | 0.32" | 0.243" | 9/32" | 3/4" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 00000 |
10-32 | 0.352" | 0.243" | 5/16" | 45/64" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 00000 |
10-32 | 0.477" | 0.243" | 7/16" | 45/64" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 00000 |
1/4"-20 | 0.235" | 0.305" | 3/16" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
1/4"-20 | 0.297" | 0.305" | 1/4" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
1/4"-20 | 0.485" | 0.305" | 7/16" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 0000 |
5/16"-18 | 0.43" | 0.37" | 3/8" | 7/8" | 0.055" | 3/8" | 3/8" | 25 | 000000000 | 00000 |
5/16"-18 | 0.68" | 0.37" | 5/8" | 7/8" | 0.055" | 3/8" | 3/8" | 50 | 000000000 | 00000 |
Black-Oxide Steel | ||||||||||
6-32 | 0.274" | 0.162" | 1/4" | 9/16" | 0.024" | 11/64" | 11/64" | 50 | 000000000 | 0000 |
8-32 | 0.281" | 0.209" | 1/4" | 23/32" | 0.031" | 7/32" | 7/32" | 50 | 000000000 | 00000 |
8-32 | 0.289" | 0.22" | 1/4" | 1/2" | 0.039" | 7/32" | 7/32" | 50 | 000000000 | 0000 |
8-32 | 0.297" | 0.22" | 1/4" | 19/32" | 0.047" | 1/4" | 1/4" | 50 | 000000000 | 0000 |
10-24 | 0.227" | 0.243" | 3/16" | 3/4" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 00000 |
10-24 | 0.352" | 0.243" | 5/16" | 45/64" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 00000 |
10-24 | 0.414" | 0.243" | 3/8" | 3/4" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
10-24 | 0.477" | 0.243" | 7/16" | 45/64" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
10-24 | 0.602" | 0.243" | 9/16" | 3/4" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
10-32 | 0.227" | 0.243" | 3/16" | 1/2" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
10-32 | 0.477" | 0.243" | 7/16" | 45/64" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
1/4"-20 | 0.235" | 0.305" | 3/16" | 3/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 0000 |
1/4"-20 | 0.297" | 0.305" | 1/4" | 3/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 0000 |
1/4"-20 | 0.36" | 0.305" | 5/16" | 3/4" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 00000 |
1/4"-20 | 0.422" | 0.305" | 3/8" | 3/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 0000 |
1/4"-20 | 0.485" | 0.305" | 7/16" | 3/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 0000 |
1/4"-20 | 0.61" | 0.305" | 9/16" | 3/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 0000 |
5/16"-18 | 0.43" | 0.37" | 3/8" | 7/8" | 0.055" | 3/8" | 3/8" | 25 | 000000000 | 00000 |
5/16"-18 | 0.68" | 0.37" | 5/8" | 7/8" | 0.055" | 3/8" | 3/8" | 25 | 000000000 | 00000 |
3/8"-16 | 0.501" | 0.44" | 7/16" | 1" | 0.063" | 29/64" | 29/64" | 25 | 000000000 | 00000 |
Six prongs around the barrel of these inserts provide a strong hold and prevent them from loosening and twisting. They’re zinc-plated steel for mild corrosion resistance. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
Barrel | Flange | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Installed Lg. | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||
10-24 | 0.32" | 0.243" | 9/32" | 3/4" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 000000 |
10-24 | 0.477" | 0.243" | 7/16" | 45/64" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 00000 |
10-32 | 0.32" | 0.243" | 9/32" | 3/4" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 00000 |
10-32 | 0.35" | 0.236" | 5/16" | 45/64" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 0000 |
10-32 | 0.477" | 0.243" | 7/16" | 45/64" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 00000 |
1/4"-20 | 0.3" | 0.305" | 1/4" | 3/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 0000 |
1/4"-20 | 0.36" | 0.305" | 5/16" | 3/4" | 0.047" | 5/16" | 5/16" | 100 | 000000000 | 00000 |
1/4"-20 | 0.485" | 0.305" | 7/16" | 3/4" | 0.047" | 5/16" | 5/16" | 100 | 000000000 | 00000 |
1/4"-20 | 0.61" | 0.305" | 9/16" | 3/4" | 0.047" | 5/16" | 5/16" | 25 | 000000000 | 0000 |
3/8"-16 | 0.501" | 0.44" | 7/16" | 1" | 0.063" | 29/64" | 29/64" | 50 | 000000000 | 00000 |
Hooked prongs give these tee nut inserts excellent holding power even when removing screws. Use them in softwood such as particleboard. They’re zinc-plated steel for mild corrosion resistance. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
Barrel | Flange | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Installed Lg. | Dia. | Lg. | Wd. | Lg. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
10-24 | 0.414" | 0.28" | 3/8" | 11/16" | 45/64" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 000000 |
10-32 | 0.477" | 0.28" | 7/16" | 11/16" | 45/64" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 00000 |
1/4"-20 | 0.426" | 0.35" | 3/8" | 13/16" | 53/64" | 0.051" | 5/16" | 5/16" | 50 | 000000000 | 00000 |
1/4"-20 | 0.61" | 0.34" | 9/16" | 11/16" | 45/64" | 0.047" | 5/16" | 5/16" | 50 | 000000000 | 00000 |
5/16"-18 | 0.676" | 0.415" | 5/8" | 13/16" | 53/64" | 0.051" | 25/64" | 25/64" | 50 | 000000000 | 00000 |