Tough and long-lasting, these flexible coatings protect against rust and corrosion.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

Cover sharp edges, corners, and weld seams with these thick epoxy coatings for protection against cuts and snags.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion and impact resistance.

For use with aluminum, brass, and copper parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Create your own zinc-plating system to add corrosion resistance to steel and iron parts.

Use these dyes after anodizing and before sealing to add a decorative appearance.

For use with steel and iron parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

More durable and scratch resistant than liquid paint, use this dry paint with your powder coating system.

These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

A hard waxy film protects items from abrasion. Coatings provide long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. Once removed, coatings can be melted again for repeat use.

These soft, pliable coatings add cushion and absorb shock. Use them to protect tools, dies, and other parts during shipping and storage. Once removed, coatings can be melted again for repeat use.

Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Spray these thin coatings onto most types of metal, plastic, and glass for a washable coating that protects the underlying surface from scratches. They can be easily peeled off if removed within six months.

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.

Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.

Able to withstand temperatures of up to 2500° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.

Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.

These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.

These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.

Also known as castor oil, use these to lubricate and preserve leather.

Protect clothing, furniture, and other fabric with these oil- and water-repellent coatings. Also known as oleophobic and hydrophobic coatings, they work into a fabric’s individual fibers to repel liquid and grease.

Repel spills and block stains without changing the look of fabric or upholstery.

This thermally conductive coating keeps electrical components cool by dissipating heat.

Dry to the touch in only 3 minutes, use this coating to protect circuit boards from moisture without delaying your process for drying.

To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.

Made from silicone, these coatings are more durable than acrylic coatings for roofs and have better resistance to pooling water. They reflect up to 90% of the sun's rays to reduce cooling costs.

Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

Hot-melt potting compounds have excellent flexibility, good chemical and moisture resistance, and withstand a range of temperatures. They provide good electrical insulation.

Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

No mixing required—these potting compounds come ready to apply.

Protect and revitalize asphalt surfaces with these tar-free coatings that form a weather- and water-resistant seal.

Seal rotting wood to prevent further damage while adding strength to the remaining wood fibers.

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.

This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.

Prep, paint, and seal small scratches on metal surfaces with these pens.

Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

Make your surface magnetic with this paint.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

Make items stand out under emergency lighting or in low-light environments.

Turn any surface into a dry-erase board.

Unlike paint that must be diluted, this paint comes ready for use with an air brush.

Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance. This paint mixes with the water in wet wood and allows it to penetrate the surface.

Marks made with this paint fade in approximately 30 days when exposed to sunlight and traffic.

Stain and seal in one application to protect and refresh the appearance of wood surfaces.

Restore existing water- and smoke-stained ceiling tiles to their original appearance.

This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.

Hide blemishes and protrusions on shingles and flashing. This paint matches common roofing material.

This water-based paint will not harm grass or other plant life.

This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.

Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.

Increase the wear resistance of thin floor coatings. These additives consist of an aluminum-oxide blend that improves abrasion resistance by up to 40%.

Consisting of small, spherical particles, add these to floor coatings to create a slip-resistant surface that’s easier to clean than sand-textured surfaces.

These thinners are often used for cleanup and to thin paint for spray applications.

These thinners are often used for cleanup and to thin paint for spray applications.

These thinners are often used for cleanup and to thin paint for spray applications.

Pour paint, lacquer, and resin through these strainers to remove lumps, flakes, dust, and other contaminants for a high-quality finish.

Strip paint, varnish, and urethane, penetrating several layers at once.

Remove and prevent rust inside of pipes and equipment such as boilers and heat exchangers.

Mix with water to clear all traces of silicone from molds and molded parts.

Use this thick gel to remove rust from vertical surfaces. Removers are acid free and are safe for contact with skin and sensitive surfaces, such as copper, brass, aluminum, and plastic.

Restore rusted metal surfaces to their original state. These removers dissolve rust and prevent it from returning.

Tackle tough jobs—these removers strip up to 30 layers of paint per application. Use them to prepare surfaces for refinishing.

For quick touch-ups, use these lightweight, disposable foam applicators.

Brushes have natural bristles, which are better for oil- and solvent-based paint and coatings than synthetic bristles. The smallest brushes we sell, use these for precision applications.

These brushes have a round, tapered handle that can be held like a pencil for superior control while edging. Their flat shape is best for painting flat, even surfaces. Use with oil- and solvent-based paint and coatings.

Designed with a long fluted handle, these brushes provide control when gripped anywhere along the length, even at the end for extra reach. Use them to apply oil- and solvent-based paint and coatings to flat, even surfaces.

Also known as radiator brushes, these brushes have a long, thin handle with an angled head to reach behind and around objects. Their synthetic bristles won’t absorb water, so they keep their shape when used with latex paint and other water-based paint and coatings.

Apply epoxies, urethanes, and other thick solvent-based coatings with the short and stiff natural bristles on these brushes.

These brushes have synthetic bristles, which are better for water-based paint and coatings than natural bristles. Also known as chip brushes, these brushes are often used to brush away loose paint, rust, and metal. They are meant for one-time use with paint, coatings, adhesives, and paint removers.