Use these gloves to avoid cuts when working with sharp or pointy objects.

These single-use gloves prevent cross contamination and provide the dexterity needed for intricate work.

Use these sleeves alone or with gloves to protect your arms from heat.

Protect your hands from intermittent exposure to extreme heat during jobs such as metal forging and glass manufacturing.

Use these sleeves alone or with gloves to protect your arms from welding sparks and spatter.

Protect your arm from stains, sparks, and abrasions. Use these sleeves alone or with gloves.

The all-leather design offers durability and wear resistance.

Wear as a liner or over other gloves to protect against esters as well as aromatic, chlorinated, and oxygenated solvents such as ketones and alcohols.

Often used for cleaning lab spaces, these gloves withstand most acids, alcohols, and cleaning solutions.

These gloves provide the protection you need when working in abrasive blasting cabinets.

The accordion design prevents the sleeve from collapsing and allows more air circulation. It stays connected to the glove box so you can quickly change the size or type of glove being used.

With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.

A blend of Aramid and fiberglass gives this sleeving excellent abrasion resistance. It can withstand temperatures up to 650° F

Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.

Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

Use this braided copper sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.

A specially formulated silicone rubber coating allows this sleeving to stretch over items during installation; it then tightens around its contents for a secure fit.

Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Zip this sleeving around wire, cable, or hose that are connected at both ends to quickly bundle them.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

This sleeving absorbs UV light, so it can be used in direct sunlight without getting damaged. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Made of PTFE, this sleeving has excellent resistance to chemicals and acids. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

A mica and silicone rubber blend allows this sleeving to withstand temperatures up to 2100° F. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Use this tubing in applications where temperatures reach up to 500° F. It's often used to insulate electronic components.

Extra-thick walls provide better protection against abrasion and tears than standard moisture-seal tubing, as well as creating a water-resistant seal.

This PTFE tubing withstands temperatures up to 450° F and has an inner lining that creates a water-resistant seal when heated.

With excellent resistance to tears and cuts, this tubing withstands demanding use.

Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.

Resistant to diesel fuel, hydraulic fluid, and lubricating oil, this tubing is often used in vehicles.

Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.

After being cleaned with alcohol, this tubing is bagged and sealed in a clean room. It's certified for material quality and purity.

Approved for contact with food, this tubing is FDA Compliant 21 CFR 177.1330.

Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.

A flame-retardant additive makes this polyolefin tubing combustion resistant and minimizes the spread of flames.

Extra-thick walls provide more protection against abrasion and tears than standard high-shrink-ratio tubing. This tubing shrinks down to 1/6th of its original ID, so it creates a tight seal over irregularly shaped objects.

Protect bus bars and other high-voltage devices—this tubing withstands voltages up to 5,000 volts.

Organize and route wire and cable in an enclosure—this tubing bundles wires together while allowing them to reach different connection points.

Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.

Keep general purpose tubing in a variety of sizes on hand.

Protect wire and cable without disconnecting them from an assembly. For a water-resistant seal, this wrap has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface.

These sleeves contain a corrosion inhibitor to shield metal parts from corrosion.

Adjust these tubes by twisting the two halves. A hexagonal end prevents rolling.

These tubes have one sealed end and one end that closes with a cap.

Because of their square shape, these tubes won't roll away. They can be stacked, and the flat surface is easier to label than a round surface.

Slide the 6" long cap onto one end; the other end has a permanent steel cap.

Also known as document protectors, these holders have a hole at the top for hanging.

Adhere these holders to a clean, dry surface.

The sleeve protects signs and allows you to swap material in and out.

The thin matte surface on these holders reduces glare, making it easier for scanners to read bar codes.

These are thicker and more rigid than standard document protectors.

Display documents on a desktop or other flat surface using these binders, which have a sanitary design.

These binders mount to machines, equipment, and walls.