Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure.

Zip this sleeving around wire, cable, or hose that are connected at both ends to quickly bundle them.

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Protect wire and cable without disconnecting them from an assembly. For a water-resistant seal, this wrap has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.

The smallest heat-shrink tubing we offer, this tubing protects wire with a 0.017" and smaller diameter.

Use this tubing in applications where temperatures reach up to 500° F. It's often used to insulate electronic components.

This tubing creates a tight seal over irregularly shaped objects.

Made of woven polyolefin/polyester fabric, this tubing has excellent abrasion resistance so it can be dragged over rough surfaces without damage.

Approved for contact with food, this tubing is FDA Compliant 21 CFR 177.1330.

Use this wrap with heat-shrink tubing to create a moisture-resistant seal. Apply it like tape around wire and cable, then slide the tubing over the wrap. The wrap melts when tubing is heated and bonds to the underlying surface.

Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.

With thin walls, this tubing shrinks faster than other high-temperature tubing. It withstands up to 500° F.

This PTFE tubing withstands temperatures up to 450° F and has an inner lining that creates a water-resistant seal when heated.

Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.

Seal the end of crimped connections, such as motor coils, to protect them from moisture.

Protect bus bars and other high-voltage devices—this tubing withstands voltages up to 15,000 volts.

Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.

Create a permanent seal without applying heat. This tubing is also known as cold-shrink tubing.

Shield shafts and threaded parts from abrasion and chipping.

This film has a corrosion inhibitor built-in to shield metal contents from corrosion.

This wrap conforms to the contours of any item and adheres to itself.

This printed stretch wrap comes on a handle so you can quickly apply a message to packages.

Roll these dispensers wherever you need them, then wind them around pallets or packages to dispense.

Create custom-fitted packaging for products of almost any size or shape. When activated, foam packs expand to fill the space around items.

Mount to a wall, tabletop, or floor to dispense wrap from a roll.

You only need one free hand to tear a sheet of wrap from the box.

Also known as freezer paper, this paper is appropriate for food contact. A polyethylene coating on one side provides resistance to moisture and tearing.

This wrap clings to itself but not the item being wrapped, and continues to adhere after multiple uses.

Two sheets of paper are layered and reinforced with high-strength fiberglass to withstand wrapping around heavy products.

This paper is good as an outer wrap for parcels or as packing fill. Also known as kraft paper.

This paper is good as an outer wrap for parcels or as packing fill. Also known as kraft paper.

This wrap clings to itself but not the item being wrapped, and continues to adhere after multiple uses.

Also known as newsprint, this paper is a clean, low-cost fill material.

The multilayered tissue in this wrap soaks up spills and moisture while also insulating and cushioning contents.

Made from a blended material for a longer life, these are the strongest and most durable shipping blankets we offer.

Clamp shut the jaws to seal bags.

Cover a wide area to seal large or irregularly shaped packages.

Push down on the handle to create a seal. Also known as impulse sealers, these sealers use a timer that regulates the length of the heating cycle.

Use the shelf to hold work while pushing down on the foot pedal to create a seal. Also known as impulse sealers, these sealers use a timer that regulates the length of the heating cycle.

These envelopes are made of bubble wrap with 3/16” bubbles to cushion contents.

Protect sensitive items from static charges.

A layer of bubble wrap cushions contents, providing the convenience of a bag with the protection of bubble wrap.

Shield metal from corrosion and block out damaging UV light. A hook-and-loop closure makes these bags easy to seal.

Use this UV-resistant tape to temporarily protect smooth plastic, metal, and glass surfaces.

Protect labels from moisture, oil, solvents, alkalies, and most acids.

Temporarily protect highly polished plastic, metal, and glass surfaces from scratching and marring.

In addition to resisting harsh chemicals, this tape withstands moisture, abrasion, and repeated impact.

Often used for masking vehicles when painting, this extra-wide tape clings to surfaces and seals off the covered area. It comes in a dispenser with a cutting blade.

Wrap this tape around carbon fiber and other composite parts, then heat to 150° F. Tape shrinks to squeeze out air bubbles and apply pressure so parts cure without voids.

Our thinnest duct tape, this tape is easy to unwind and tear by hand.

Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.

Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.

Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.

This tape discharges minor amounts of surface static electricity and resists static buildup.

Cover chutes, packaging lines, and slides with this tape for a slippery, nonstick surface that resists abrasion and impact.

Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.

Dissipate static and create a slick surface.