This grease remains stable and in place under high pressure, heavy loads, and shock loads. It is NSF registered H1 and FDA compliant for incidental food contact. It's often used to lubricate heavy-duty food production equipment.

Waterproof and heat-resistant, this grease can be autoclaved without washing out of equipment. It's chemically inert, so it won't interact with process fluids.

For use in applications where acids, bases, oxidizers, and fuels are present.

Made with moisture-resistant thickeners, this grease stays in place in wet environments.

This grease performs well in a wide range of bearing types.

Lubricate ball and roller bearings for high-load applications. Often used on food-processing equipment, generators, and furnace door hinges, this grease is NSF registered H1 and meets FDA Compliant 21 CFR 178.3570 for incidental food contact.

Fluorocarbon and fluorinated polymer thickeners add chemical resistance to this grease. It remains intact when exposed to water and most solvents and chemicals.

Apply directly to seals and O-rings to extend service life by preventing drying and cracking.

For use in food-processing and preparation areas, this grease is NSF registered H1 or meets FDA 21 CFR 178.3570 for incidental contact with food. It's tacky to stick to open gears and roller chain.

Use this grease in areas where there is the possibility of contact with food.

This thin lubricant penetrates into tight spaces, and nano-sized additives fill small surface imperfections, reducing wear and heat and extending the life of both the lubricant and equipment.

Formulated to handle high loads and temperatures, these multipurpose lubricants are NSF registered H1 for incidental food contact. Use them in high-pressure applications, such as gears, hinges, ovens, and dryers.

Use these lubricants to ensure smooth, consistent motion when pulling wire or cable through conduit. They provide long-lasting lubrication to support repositioning and maintenance after initial cable installation. Compatible with all cable and insulation types.

Easy to apply and mess-free, this tape won't run or rub off of threaded connections. Made with PTFE for excellent lubricity, it prevents threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.

Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.