Also known as sash cord, this rope has a soft cotton cover, so you can grip it without hurting your hands.

Also known as sash cord, this rope has a soft cotton cover, so you can grip it without hurting your hands.

Made of a polyester blend, this rope is approximately 15% lighter than standard polyester rope.

This rope is made of premium polypropylene for increased strength.

This polypropylene rope floats in water, resists rot, and doesn’t lose strength when wet.

Use this nylon rope when you need to compensate for sudden force, such as in towing applications or dock lines.

Choose this polyester rope for applications that require minimal stretch, such as tie-down applications.

The core is polyester to give the rope stretch resistance.

Often used with pulleys and sheaves, this nylon rope is more wear resistant than cotton, and has more stretch to help compensate for sudden force.

For more control over your load, this rope is a high-performance polyester also known as Vectran, which has excellent resistance to stretch and slip.

For more control over your load, this rope is a high-performance polyester also known as Vectran, which has excellent resistance to stretch and slip.

Rope has an eye on both ends to save time when attaching to tie downs and hooks.

These all-plastic lanyards are an economical alternative to rope and wire rope lanyards.

A clamp and thimble in one convenient fitting simplifies installation while providing support and fray protection to the wire rope loop. Use a torque wrench to tighten the clamp.

Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

Smooth rounded edges and an endless design prevent snags.

Keep multiple sleeves on hand in a variety of sizes.

These compression sleeves are designed to meet lifting specifications.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Use a new plug when installing a fitting on a different rope.

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Add a clevis end to wire rope without having to fray the rope or use a compression tool.

Add an eye-end to wire rope without having to fray the rope or use a compression tool.

Feed the wire rope into the opening at the bottom of these eye-end fittings and through the body for a quick and simple installation.

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty stud-end fittings. They are also known as hand swage fittings.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

This wire rope provides a good balance of abrasion resistance and flexibility.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.

This braided wire has a stiff construction for use as bracing and guy wires.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Use this wire rope when lifting in areas that are frequently washed down and require a rope that counteracts rotation.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

This steel wire rope includes a hook with latch on one end for use with winches.

With a reinforced loop, also known as a thimble eye, installed on one end, quickly attach a hook or a shackle to a wire rope.

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

The swivel hook with latch installed on one end, prevents the wire rope from twisting. It is for use with winches.

Made to meet stringent military standards, the fittings on these lanyards meet MS 20668 and MS 21259.

Attach to a threaded anchor or hole for support and use the loop to secure the suspended material.

Create a choker loop around a supporting structure with the snap-hook end and use the loop to secure the suspended material.

A large opening combined with an easy to open latch allows for quick and easy attachment to links and rings.

Attach the 90° eye to a surface for support and use the loop to secure the suspended material.

The swivel fork ends allow the lanyard to rotate freely.

Operate doors, vents, skylights, and overhead equipment.