About Pulleys
More
High-Strength Corrosion-Resistant HTD Timing Belt Pulleys
Move belts forward and backward or stop and start them in precise positions, especially in areas where rust is a concern. The curved teeth on these high-torque drive (HTD) pulleys have more surface contact with belts than traditional trapezoidal teeth, which allows you to apply more torque without damaging belts. These teeth fit together seamlessly to prevent backlash, or unwanted movement of the belt on the pulley, for a smooth, quiet cycle. These pulleys are often used in 3D printing, machine tool drives, robotics, and other applications where precision is essential. They are also known as curvilinear belt pulleys.
Pair pulleys with an HTD timing belt that has the same pitch. The width of your belt should not be larger than the maximum belt width listed.
Stainless steel pulleys can be wetted repeatedly without rusting or staining.
Bushing-mount pulleys grip the shaft more securely than press-fit pulleys, but require a quick-disconnect (QD) bushing or a split-tapered bushing (not included).
For technical drawings and 3-D models, click on a part number.
OD, mm | Number of Teeth | Pitch, mm | For Shaft Dia. | Bore Type | Inside Wd., mm | Outside Wd., mm | Overall Wd., mm | Pitch Dia., mm | Number of Flanges | Fabrication | Hub Dia., mm | Each | |
For 15 mm Max. Belt Wd. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53.98 | 32 | 5 | 1/2" | Plain | 17.78 | 21.34 | 47.63 | 49.784 | 2 | Machined | 39.37 | 0000000 | 0000000 |
58.17 | 34 | 5 | 1/2" | Plain | 16.51 | 21.34 | 47.63 | 52.959 | 2 | Machined | 42.68 | 0000000 | 000000 |
66.37 | 36 | 5 | 1/2" | Plain | 16.51 | 21.34 | 47.63 | 56.159 | 2 | Machined | 45.72 | 0000000 | 000000 |
For 20 mm Max. Belt Wd. | |||||||||||||
65.08 | 22 | 8 | 1/2" | Plain | 22.35 | 28.58 | 44.45 | 54.66 | 2 | Machined | 41.28 | 0000000 | 000000 |
For 30 mm Max. Belt Wd. | |||||||||||||
65.08 | 22 | 8 | 1/2" | Plain | 31.75 | 38.1 | 53.98 | 54.66 | 2 | Machined | 41.28 | 0000000 | 000000 |
69.85 | 24 | 8 | 1/2" | Plain | 31.75 | 38.1 | 53.98 | 59.74 | 2 | Machined | 46.04 | 0000000 | 000000 |
74.6 | 26 | 8 | 1/2" | Plain | 31.75 | 38.1 | 57.15 | 64.846 | 2 | Machined | 50.8 | 0000000 | 000000 |
OD, mm | Number of Teeth | Pitch, mm | ID | Bore Type | For Bushing Style | Inside Wd., mm | Outside Wd., mm | Overall Wd., mm | Pitch Dia., mm | Number of Flanges | Fabrication | Each | |
For 15 mm Max. Belt Wd. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
67.57 | 40 | 5 | 1.375" | Finished | Quick Disconnect Style JA | 16.51 | 21.34 | 21.34 | 62.509 | 2 | Machined | 0000000 | 0000000 |
For 20 mm Max. Belt Wd. | |||||||||||||
70 | 26 | 8 | 1.374" | Finished | Quick Disconnect Style JA | 22.35 | 28.58 | 28.58 | 62.22 | 2 | Machined | 0000000 | 000000 |
80.17 | 28 | 8 | 1.625" | Finished | Split Tapered Style H | 22.35 | 28.58 | 28.58 | 71.3 | 2 | Machined | 0000000 | 000000 |
84.94 | 30 | 8 | 1.625" | Finished | Split Tapered Style H | 22.35 | 28.58 | 28.58 | 76.4 | 2 | Machined | 0000000 | 000000 |
95.25 | 34 | 8 | 1.871" | Finished | Quick Disconnect Style SH | 22.35 | 28.58 | 28.58 | 86.59 | 2 | Machined | 0000000 | 000000 |
110.34 | 40 | 8 | 1.871" | Finished | Quick Disconnect Style SH | 22.35 | 28.58 | 28.58 | 101.854 | 2 | Machined | 000000 | 000000 |
120.65 | 44 | 8 | 2.187" | Finished | Quick Disconnect Style SDS | 22.35 | 28.58 | 28.58 | 112.04 | 2 | Machined | 0000000 | 000000 |
130.99 | 48 | 8 | 2.187" | Finished | Quick Disconnect Style SDS | 22.35 | 28.58 | 28.58 | 122.22 | 2 | Machined | 0000000 | 000000 |
150.8 | 56 | 8 | 2.187" | Finished | Quick Disconnect Style SDS | 22.35 | 28.58 | 28.58 | 141.224 | 2 | Machined | 0000000 | 000000 |
For 30 mm Max. Belt Wd. | |||||||||||||
78.49 | 28 | 8 | 1.625" | Finished | Split Tapered Style H | 33.32 | 38.1 | 38.1 | 71.3 | 2 | Machined | 0000000 | 000000 |
84.94 | 30 | 8 | 1.625" | Finished | Split Tapered Style H | 31.75 | 38.1 | 38.1 | 76.4 | 2 | Machined | 0000000 | 000000 |
90.48 | 32 | 8 | 1.625" | Finished | Split Tapered Style H | 31.75 | 38.1 | 38.1 | 81.48 | 2 | Machined | 0000000 | 000000 |
95.25 | 34 | 8 | 1.871" | Finished | Quick Disconnect Style SH | 31.75 | 38.1 | 38.1 | 86.59 | 2 | Machined | 000000 | 000000 |
110.34 | 40 | 8 | 1.871" | Finished | Quick Disconnect Style SH | 31.75 | 38.1 | 38.1 | 101.854 | 2 | Machined | 0000000 | 000000 |
120.65 | 44 | 8 | 2.187" | Finished | Quick Disconnect Style SDS | 31.75 | 38.1 | 38.1 | 112.04 | 2 | Machined | 0000000 | 000000 |
130.99 | 48 | 8 | 2.187" | Finished | Quick Disconnect Style SDS | 31.75 | 38.1 | 38.1 | 122.22 | 2 | Machined | 0000000 | 000000 |
150.8 | 56 | 8 | 2.187" | Finished | Quick Disconnect Style SDS | 31.75 | 38.1 | 38.1 | 142.6 | 2 | Machined | 0000000 | 000000 |
For 50 mm Max. Belt Wd. | |||||||||||||
95.25 | 34 | 8 | 1.871" | Finished | Quick Disconnect Style SH | 53.98 | 60.33 | 60.33 | 86.59 | 2 | Machined | 0000000 | 000000 |
100 | 36 | 8 | 1.871" | Finished | Quick Disconnect Style SH | 53.98 | 60.33 | 60.33 | 91.67 | 2 | Machined | 0000000 | 000000 |
110.34 | 40 | 8 | 1.871" | Finished | Quick Disconnect Style SH | 53.98 | 60.33 | 60.33 | 101.854 | 2 | Machined | 0000000 | 000000 |
Pulleys for Wire Rope—For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing. Ball bearings and needle-roller bearings allow for easier turns than sleeve bearings.
Stainless steel is the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Each | ||
With Sleeve Bearing | |||||||||
---|---|---|---|---|---|---|---|---|---|
C | 1/8" | 1,000 | 2 1/4" | 1 7/8" | 1/4" | 13/16" | Stainless Steel | 00000000 | 000000 |
C | 3/16" | 1,000 | 2" | 1 1/2" | 3/8" | 9/16" | Stainless Steel | 000000000 | 00000 |
C | 3/16" | 1,500 | 3 1/4" | 2 3/4" | 3/8" | 15/16" | Stainless Steel | 00000000 | 00000 |
C | 1/4" | 1,500 | 2 1/2" | 1 7/8" | 5/8" | 11/16" | Stainless Steel | 000000000 | 00000 |
C | 1/4" | 3,000 | 4 1/4" | 3 1/2" | 1/2" | 1 1/8" | Stainless Steel | 00000000 | 000000 |
C | 5/16" | 5,000 | 5 1/4" | 4 3/8" | 1/2" | 1 3/8" | Stainless Steel | 00000000 | 000000 |
C | 3/8" | 8,000 | 6 1/4" | 5 1/4" | 1/2" | 1 5/8" | Stainless Steel | 00000000 | 000000 |
With Ball Bearing | |||||||||
C | 1/8" | 1,000 | 2 1/4" | 1 7/8" | 3/8" | 13/16" | Stainless Steel | 0000000 | 00000 |
C | 3/16" | 1,200 | 3 1/4" | 2 3/4" | 1/2" | 15/16" | Stainless Steel | 0000000 | 000000 |
C | 1/4" | 1,200 | 4 1/4" | 3 1/2" | 1/2" | 1 1/16" | Stainless Steel | 0000000 | 000000 |
Hanging Pulleys for Wire Rope—For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load. They have a bracket on the bottom for tying off one end of your wire rope.
Stainless steel is the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | ||
Single-Groove Without Bearing | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Eye | ||||||||||||
A | 1/2" | 1,650 | 2" | 1 5/16" | 2" | 4 7/8" | 3/4" | 5/16" | Stainless Steel | Stainless Steel | 0000000 | 000000 |
A | 9/16" | 2,475 | 3" | 1 5/16" | 3" | 7" | 15/16" | 7/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
A | 5/8" | 4,175 | 4" | 1 1/2" | 4" | 8" | 15/16" | 1/2" | Stainless Steel | Stainless Steel | 0000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||
Swivel Eye | ||||||||||||
D | 5/16" | 1,100 | 1" | 1 31/32" | 1" | 3 3/4" | 1/2" | 1/4" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
D | 5/16" | 1,250 | 1 1/4" | 2 1/32" | 1 1/4" | 4 1/2" | 9/16" | 1/4" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
D | 7/16" | 1,850 | 2" | 2 29/64" | 2" | 5 1/2" | 3/4" | 5/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Pulleys for Rope—For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel is the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Each | |
With Ball Bearing | ||||||||
---|---|---|---|---|---|---|---|---|
1/4" | 300 | 1 1/4" | 1" | 1/4" | 1/2" | Stainless Steel | 0000000 | 000000 |
3/8" | 1,000 | 2 1/4" | 1 7/8" | 3/8" | 13/16" | Stainless Steel | 0000000 | 00000 |
1/2" | 1,200 | 3 1/4" | 2 3/4" | 1/2" | 15/16" | Stainless Steel | 0000000 | 000000 |
5/8" | 2,500 | 4 1/4" | 3 5/8" | 5/8" | 1 1/16" | Stainless Steel | 0000000 | 000000 |
Without Bearing | ||||||||
1/4" | 400 | 1 1/4" | 1" | 1/4" | 1/2" | Stainless Steel | 0000000 | 00000 |
5/16" | 600 | 1 3/4" | 1 7/16" | 1/4" | 5/8" | Stainless Steel | 0000000 | 00000 |
3/8" | 1,000 | 2 1/4" | 1 7/8" | 3/8" | 13/16" | Stainless Steel | 0000000 | 00000 |
7/16" | 1,500 | 3 1/4" | 2 13/16" | 1/4" | 15/16" | Stainless Steel | 0000000 | 00000 |
1/2" | 1,500 | 3 1/4" | 2 3/4" | 1/2" | 15/16" | Stainless Steel | 0000000 | 00000 |
9/16" | 3,000 | 4 1/4" | 3 11/16" | 3/8" | 1 1/8" | Stainless Steel | 000000 | 00000 |
5/8" | 3,000 | 4 1/4" | 3 5/8" | 1/2" | 1 1/8" | Stainless Steel | 0000000 | 000000 |
3/4" | 5,000 | 5 1/4" | 4 1/2" | 1/2" | 1 3/8" | Stainless Steel | 0000000 | 000000 |
1" | 8,000 | 6 1/4" | 5 1/4" | 3/4" | 1 5/8" | Stainless Steel | 0000000 | 000000 |
Hanging Pulleys for Rope—For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Stainless steel is the most corrosion resistant.
Pulley for 3/8" dia. rope can be set to ratchet even when not under load.
For technical drawings and 3-D models, click on a part number.
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Hook Opening Wd. | Hook Thick. | Material | Housing Material | Each | |
Single-Groove Without Bearing | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Eye | ||||||||||||||
K | 1/4" | 400 | 1 1/4" | 7/8" | 1 1/4" | 3 1/4" | 5/8" | 1/4" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 000000 |
K | 5/16" | 600 | 1 3/4" | 15/16" | 1 3/4" | 3 7/8" | 5/8" | 1/4" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
K | 3/8" | 1,000 | 2 1/4" | 1 1/16" | 2 1/4" | 5" | 13/16" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Swivel Hook | ||||||||||||||
L | 3/8" | 750 | 2" | 1 1/8" | 2" | 5 1/2" | __ | __ | 9/16" | 7/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Double-Groove Without Bearing | ||||||||||||||
Swivel Eye | ||||||||||||||
R | 1/4" | 400 | 1 1/4" | 1 1/2" | 1 1/4" | 3 1/4" | 9/16" | 1/4" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
R | 5/16" | 600 | 1 3/4" | 1 3/4" | 1 3/4" | 3 7/8" | 5/8" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
R | 3/8" | 1,000 | 2 1/4" | 2" | 2 1/4" | 5" | 13/16" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Easy-Open Hanging Pulleys for Rope—For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it's easier to feed the rope through the housing—a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Stainless steel is more corrosion resistant than aluminum.
For technical drawings and 3-D models, click on a part number.
Pulleys for Wire Rope—For Lifting
Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with ball bearings and needle-roller bearings allow for easier turns than pulleys with sleeve bearings. Pulleys with sealed bearings block out dust and other contaminants.
Stainless steel pulleys are the most corrosion resistant.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Specifications Met | Each | ||
B | 1/8" | 675 | 2 1/2" | 2 3/16" | 1/2" | 1/2" | Stainless Steel | ASME B30.26 | 00000000 | 000000 |
B | 3/16" | 525 | 1 1/2" | 1" | 1/2" | 1/2" | Stainless Steel | ASME B30.26 | 00000000 | 00000 |
B | 3/16" | 600 | 2" | 1 1/2" | 1/2" | 1/2" | Stainless Steel | ASME B30.26 | 00000000 | 00000 |
B | 1/4" | 675 | 2 1/2" | 2" | 1/2" | 1/2" | Stainless Steel | ASME B30.26 | 00000000 | 00000 |
B | 1/4" | 800 | 3" | 2 1/2" | 1/2" | 1/2" | Stainless Steel | ASME B30.26 | 00000000 | 00000 |
B | 5/16" | 800 | 3" | 2 1/2" | 1/2" | 1/2" | Stainless Steel | ASME B30.26 | 00000000 | 00000 |
B | 5/16" | 1,550 | 3 1/2" | 3" | 3/4" | 11/16" | Stainless Steel | ASME B30.26 | 00000000 | 00000 |
B | 3/8" | 1,550 | 3 1/2" | 3" | 3/4" | 11/16" | Stainless Steel | ASME B30.26 | 00000000 | 00000 |
B | 3/8" | 1,700 | 4" | 3 1/4" | 3/4" | 11/16" | Stainless Steel | ASME B30.26 | 00000000 | 00000 |
B | 3/8" | 1,850 | 5" | 4 1/4" | 3/4" | 11/16" | Stainless Steel | ASME B30.26 | 00000000 | 000000 |
For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Bearing Seal Type | Specifications Met | Each | ||
D | 1/8" | 1,000 | 2 1/4" | 2" | 15/32" | 25/32" | Stainless Steel | Sealed | ASME B30.26 | 0000000 | 0000000 |
D | 1/4" | 3,500 | 4 1/4" | 3 3/4" | 25/32" | 1 3/16" | Stainless Steel | Sealed | ASME B30.26 | 0000000 | 000000 |
D | 3/8" | 7,000 | 6" | 5 3/8" | 1 5/32" | 1 1/2" | Stainless Steel | Sealed | ASME B30.26 | 0000000 | 000000 |
D | 1/2" | 10,500 | 8" | 7" | 1 3/8" | 1 11/16" | Stainless Steel | Sealed | ASME B30.26 | 0000000 | 000000 |
D | 5/8" | 16,000 | 10" | 8 3/4" | 1 3/4" | 2" | Stainless Steel | Sealed | ASME B30.26 | 0000000 | 00000000 |
D | 3/4" | 23,000 | 12" | 10 3/8" | 2 5/32" | 2 1/4" | Stainless Steel | Sealed | ASME B30.26 | 0000000 | 00000000 |
D | 7/8" | 31,000 | 14" | 12 5/16" | 2 9/16" | 2 5/8" | Stainless Steel | Sealed | ASME B30.26 | 0000000 | 00000000 |
D | 1" | 41,000 | 16" | 14 3/16" | 2 15/16" | 2 29/32" | Stainless Steel | Sealed | ASME B30.26 | 0000000 | 00000000 |
G | 1/8" | 675 | 2 1/2" | 2" | 1/2" | 7/16" | Stainless Steel | Sealed | ASME B30.26 | 00000000 | 00000 |
G | 3/16" | 525 | 1 1/2" | 1" | 1/4" | 7/16" | Stainless Steel | Sealed | ASME B30.26 | 00000000 | 00000 |
G | 3/16" | 600 | 2" | 1 1/2" | 1/2" | 7/16" | Stainless Steel | Sealed | ASME B30.26 | 00000000 | 00000 |
G | 1/4" | 675 | 2 1/2" | 2" | 1/2" | 7/16" | Stainless Steel | Sealed | ASME B30.26 | 00000000 | 00000 |
G | 1/4" | 800 | 3" | 2 1/2" | 1/2" | 7/16" | Stainless Steel | Sealed | ASME B30.26 | 00000000 | 000000 |
G | 5/16" | 800 | 3" | 2 1/2" | 1/2" | 7/16" | Stainless Steel | Sealed | ASME B30.26 | 00000000 | 000000 |
G | 5/16" | 1,550 | 3 1/2" | 3" | 3/4" | 5/8" | Stainless Steel | Sealed | ASME B30.26 | 00000000 | 000000 |
G | 3/8" | 1,550 | 3 1/2" | 3" | 3/4" | 5/8" | Stainless Steel | Sealed | ASME B30.26 | 00000000 | 000000 |
G | 3/8" | 1,700 | 4" | 3 1/4" | 3/4" | 5/8" | Stainless Steel | Sealed | ASME B30.26 | 00000000 | 000000 |
G | 3/8" | 1,850 | 5" | 4 1/4" | 3/4" | 5/8" | Stainless Steel | Sealed | ASME B30.26 | 00000000 | 000000 |
Mounted Pulleys for Wire Rope—For Lifting
Mount these pulleys to a flat surface.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant than steel.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Specifications Met | Each | |
Single-Groove With Bearing | ||||||||||||||
2 | 1/4" | 3,500 | 4 1/4" | 5 1/4" | 4 1/4" | 4 1/2" | Stainless Steel | 4 | 3/8" | 2 3/8" | 3 7/16" | ASME B30.26 | 0000000 | 0000000 |
Stainless Steel Pulleys for Conveyor Belts
Replace worn or damaged pulleys or create new belt conveyors. The corrosion-resistant stainless steel construction makes these pulleys suitable for washdown applications.
Tapered pulleys, also known as crowned pulleys, improve belt tracking.
For technical drawings and 3-D models, click on a part number.
Keyway | 2" Dia. | |||||
---|---|---|---|---|---|---|
Wd. | For Belt Wd. | Bore Dia. | Wd. | Ht. | Each | |
6" | 4" | 3/4" | 3/16" | 3/32" | 00000000 | 0000000 |
6" | 4" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
8" | 6" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
8" | 6" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
10" | 8" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
10" | 8" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
12" | 10" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
12" | 10" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
14" | 12" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
14" | 12" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
16" | 14" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
16" | 14" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
18" | 16" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
18" | 16" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
20" | 18" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
20" | 18" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
22" | 20" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
22" | 20" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
26" | 24" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
26" | 24" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
32" | 30" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
32" | 30" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
38" | 36" | 3/4" | 3/16" | 3/32" | 00000000 | 000000 |
38" | 36" | 1" | 1/4" | 1/8" | 00000000 | 00000000 |
Keyway | 4" Dia. | |||||
---|---|---|---|---|---|---|
Wd. | For Belt Wd. | Bore Dia. | Wd. | Ht. | Each | |
6" | 4" | 5/8" | 3/16" | 3/32" | 00000000 | 0000000 |
6" | 4" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
8" | 6" | 5/8" | 3/16" | 3/32" | 00000000 | 000000 |
8" | 6" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
10" | 8" | 5/8" | 3/16" | 3/32" | 00000000 | 000000 |
10" | 8" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
12" | 10" | 5/8" | 3/16" | 3/32" | 00000000 | 000000 |
12" | 10" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
14" | 12" | 5/8" | 3/16" | 3/32" | 00000000 | 000000 |
14" | 12" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
16" | 14" | 5/8" | 3/16" | 3/32" | 00000000 | 000000 |
16" | 14" | 1" | 1/4" | 1/8" | 00000000 | 000000 |
18" | 16" | 5/8" | 3/16" | 3/32" | 00000000 | 00000000 |
18" | 16" | 1" | 1/4" | 1/8" | 00000000 | 00000000 |
20" | 18" | 5/8" | 3/16" | 3/32" | 00000000 | 000000 |
20" | 18" | 1" | 1/4" | 1/8" | 00000000 | 00000000 |
22" | 20" | 5/8" | 3/16" | 3/32" | 00000000 | 00000000 |
22" | 20" | 1" | 1/4" | 1/8" | 00000000 | 00000000 |
26" | 24" | 5/8" | 3/16" | 3/32" | 00000000 | 00000000 |
26" | 24" | 1" | 1/4" | 1/8" | 00000000 | 00000000 |
32" | 30" | 5/8" | 3/16" | 3/32" | 00000000 | 00000000 |
32" | 30" | 1" | 1/4" | 1/8" | 00000000 | 00000000 |
38" | 36" | 5/8" | 3/16" | 3/32" | 00000000 | 00000000 |
38" | 36" | 1" | 1/4" | 1/8" | 00000000 | 00000000 |