These L series (light) pulleys and have trapezoidal teeth.

Move heavy loads without slippage—pulleys mount with a bushing for a more secure grip on the shaft than set screws.

Add these free-spinning pulleys to your timing belt setup to minimize vibration and keep belts from wearing out.

Use these pulleys with compatible quick-disconnect bushings.

Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.

Mount these pulleys to a flat surface.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

A rubber coating, also known as lagging, increases friction for a better grip on the belt.

Install these balancers on a vertical frame to suspend, lift, or lower objects that move vertically in a track such as windows, doors, and panels.