McMaster-Carr

Choose a Category

Clear All

	For Use With For Use With

	Voltage Voltage

208 to 240V
AC

	Power Source Power Source

Electric

	System of Measurement System of Measurement

Inch

	Maximum Flow Rate Maximum Flow Rate

	Pump Type Pump Type

Positive
Displacement

	Discharge Pipe Size Discharge Pipe Size

1/2

1 1/4

1 1/2

	Housing Material Housing Material

	Power Power	Show

1 hp

	Power Power	Hide

	Impeller Material Impeller Material

Plastic

Stainless
Steel

Bronze

Iron

Aluminum

Steel

	Intake Pipe Size Intake Pipe Size

1/2

1 1/4

1 1/2

	Maximum Feet of Head Maximum Feet of Head

Less than 500 ft.

	Maximum Temperature Maximum Temperature

	Phase Phase

Single

Three

	Motor Enclosure Type Motor Enclosure Type

Totally Enclosed Fan Cooled
(TEFC)

Open Dripproof (ODP)

Totally Enclosed

	Pump Style Pump Style

Circulating

Constant Flow Rate

	Intake Connection Style Intake Connection Style

	Electrical Connection Type Electrical Connection Type

Hardwire

Plug

	Priming Type Priming Type

Gravity Fed

Initial Fill

	Discharge Gender Discharge Gender

Female

Male

	Current Current

3.2-3A

3.3-2.2A

6.3-4.6A

	Duty Cycle Duty Cycle

Continuous

Intermittent

	Thermal Protection Thermal Protection

With Thermal Overload
Protection

Without Thermal Overload
Protection

	Discharge Connection Type Discharge Connection Type

Pipe

Tube

Hose

View catalog pages (18)

Forward

How can we improve?

77 Products

About Air Compressors

About Process Pumps

About Vacuum Pumps

How to Prime Your Pump

How to Determine Feet of Head

About Sump, Water-Removal, Condensate, and Submersible Pumps

About Drum Pumps

Propel liquid higher and farther than standard high-efficiency circulation pumps. These pumps use less electricity to achieve the same flow rates as other circulation pumps. They have a totally enclosed fan cooled (TEFC) motor for use in dusty, dirty, and damp environments. The housing rotates for vertical or horizontal discharge. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

	Flow Rate, gpm					Intake (NPT)		Discharge (NPT)		Overall
Max. Flow Rate, gpm	@ 60 ft. of Head	Max. Ft. of Head, ft.	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each
208-240/460V AC, Three Phase
Hardwire
40	29	75	17	1	3.2- 3/1.5	1 1/4	Female	1	Female	16"	7 7/8"	9"	0000000	000000000

High-Efficiency Circulation Pumps
for Water, Coolants, and Oil

Use less electricity to achieve the same flow rates as other circulation pumps. These pumps have a totally enclosed motor for use in dusty, dirty, and damp environments. The housing rotates for vertical or horizontal discharge. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm						Intake (NPT)		Discharge (NPT)		Overall					Impellers
Max. Flow Rate, gpm	@ 30 ft. of Head	@ 40 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each		Each
208-240/460V AC, Three Phase
Hardwire
60	75	60	53	17	1	3.2- 3/1.5	1 1/2	Female	1 1/4	Female	15"	9"	8"	0000000	0000000	0000000	0000000

High-Head Circulation Pumps for Water

Also known as booster pumps, these have a multistage impeller that propels water about two times higher and farther than standard circulation pumps. Use them in applications such as water delivery, irrigation, and pressure washing. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

	Flow Rate, gpm											Intake (NPT)		Discharge (NPT)		Overall
Max. Flow Rate, gpm	@ 80 ft. of Head	@ 90 ft. of Head	@ 100 ft. of Head	@ 110 ft. of Head	@ 120 ft. of Head	@ 130 ft. of Head	@ 140 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each
120/240V AC, Single Phase
Hardwire
22	21	20	18	17	15	13	10	163	50	1	10.6/5.4	1	Female	1	Female	14 3/8"	6 1/4"	8 1/4"	0000000	000000000

Circulation Pumps for Water Sprinklers

These pumps have high flow rates for irrigation and landscaping. The open dripproof (ODP) motor is for use in clean, dry, and well-ventilated environments. Pumps are self-priming after you fill the pump chamber with liquid. As liquid in the chamber is expelled, a suction force is created which allows the pump to draw liquid upward. They can be mounted up to 25 ft. above your liquid source.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry. If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

	Flow Rate, gpm											Intake (NPT)		Discharge (NPT)		Overall
Max. Flow Rate, gpm	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	@ 70 ft. of Head	@ 80 ft. of Head	@ 90 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each
120/240V AC, Single Phase
Hardwire
56	53	50	46	43	37	33	25	108	1	1	14.8/7.4	2	Female	1 1/2	Female	18 5/8"	12 3/8"	11 7/8"	0000000	0000000

Self-Priming Circulation Pumps for Water and Coolants

Drain underground tanks and process wastewater with pumps that can be installed up to 20 ft. above your liquid source. They have an open dripproof (ODP) motor for use in clean, dry, and well-ventilated environments. Pumps are self-priming after you fill the pump chamber with liquid. As liquid in the chamber is expelled, a suction force is created which allows the pump to draw liquid upward.

Pumps
	Flow Rate, gpm						Intake (NPT)		Discharge (NPT)		Overall					Impellers
Max. Flow Rate, gpm	@ 40 ft. of Head	@ 50 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each		Each
120/240V AC, Single Phase— With Thermal Overload Protection
Hardwire
82	53	40	70	1	1	17/9	1 1/4	Female	1 1/4	Female	18 3/8"	6 7/8"	7 1/4"	00000000	0000000	000000000	000000

Harsh-Environment Self-Priming
Circulation Pumps for Water and Coolants

The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Install these pumps up to 20 ft. above your liquid source to drain underground tanks and process wastewater. They are self-priming after you fill the pump chamber with liquid. As liquid in the chamber is expelled, a suction force is created which allows the pump to draw liquid upward.

Pumps
	Flow Rate, gpm						Intake (NPT)		Discharge (NPT)		Overall					Impellers
Max. Flow Rate, gpm	@ 40 ft. of Head	@ 50 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each		Each
120/240V AC, Single Phase—With Thermal Overload Protection
Hardwire
82	49	34	65	1	1	12/6	1 1/4	Female	1 1/4	Female	18"	8 7/8"	7 1/4"	00000000	0000000	000000000	000000
120	54	44	80	1	1	12/6	1 1/2	Female	1 1/2	Female	17 3/4"	9 1/8"	10"	00000000	000000	000000000	00000
240/460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
82	49	34	65	1	1	4/2	1 1/4	Female	1 1/4	Female	16 5/8"	8 7/8"	8 5/8"	00000000	000000	000000000	00000
120	54	44	80	1	1	4/2	1 1/2	Female	1 1/2	Female	16 3/8"	9 1/8"	10"	00000000	000000	000000000	00000

Immersion Circulation Pumps for Coolants

Commonly used in machine tool coolant tanks, these pumps have an intake that can be completely submerged in liquid. A universal mounting plate fits machine tools from manufacturers such as Fuji, Mitsubishi, Toshiba, Hitachi, and Yasukawa. Motor is totally enclosed with sealed bearings for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. They can run dry.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm										Discharge (NPT)		Overall						Replacement Impellers
Max. Flow Rate, gpm	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Intake Connection Type	Pipe Size	Gender	Lg.	Wd.	Ht.	Shaft Ht.		Each		Each
240/460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
50	50	40	30	18	1	60	90	1	3.2/2	Open Inlet	1	Female	9"	7 3/4"	21 7/8"	11 1/2"	00000000	0000000	0000000	000000

Remote-Mount Circulation Pumps for Water and Coolants

Use when space is limited—these pumps connect to a pipe coming from your tank so you can place the pump in another location. Mount above or below the liquid level. Pumps are self-priming after you fill the pump chamber with liquid. As liquid in the chamber is expelled, a suction force is created which allows the pump to draw liquid upward.

Pumps
	Flow Rate, gpm								Intake (NPT)		Discharge (NPT)		Overall					Replacement Impellers
Max. Flow Rate, gpm	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each		Each
240/460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
48	40	30	18	1	60	90	1	3.2/2	1	Female	1	Female	9 3/4"	8 1/8"	14"	00000000	0000000	0000000	000000

Maintenance Kit for Pumps with 32 gpm, 43 gpm, or 48 gpm Max. Flow Rate

00000000

Each

000000

Stainless Steel Circulation Pumps for Chemicals

A 316 stainless steel housing sealed with fluoroelastomer resists mild chemicals and acids, such as coolant, oil, and phosphoric acid. These pumps have a totally enclosed fan-cooled (TEFC) motor for use in dusty, dirty, and damp environments. They are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm								Intake (NPT)		Discharge (NPT)		Overall					Replacement Impellers
Max. Flow Rate, gpm	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	Max. ft. of Head	Max. Solids Dia.	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each		Each
120/240V AC, Single Phase—With Thermal Overload Protection
Hardwire
90	82	63	35	60	3/32"	50	1	12.6/6.3	1 1/2	Female	1 1/4	Female	16"	9"	8 3/4"	0000000	0000000	0000000	0000000
240/460V AC, Three Phase—With Thermal Overload Protection
Hardwire
75	47	15	__	34	3/16"	50	1	2.9/1.4	1 1/2	Female	1 1/4	Female	16"	9"	8 3/4"	0000000	000000	0000000	000000

Maintenance Kit for Pumps with 3/16" or 3/32" Max. Solids Dia.

0000000

Each

0000000

Extended-Life Plastic Circulation Pumps for Chemicals

These pumps have the best chemical resistance of all our circulation pumps. Instead of a shaft seal, they use magnets to turn the impeller, reducing wear and leakage. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm										Pipe Size		Overall					Maintenance Kits		Replacement Impellers
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Intake (Gender)	Discharge (Gender)	Lg.	Wd.	Ht.		Each		Each		Each
240V AC, 460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
90	90	84	74	61	49	__	70	__	1	1.5/3	1 1/2 (Female)	1 1/2 (Female)	18 7/8"	6 5/16"	10 1/8"	0000000	000000000	00000000	000000	00000000	0000000
120V AC, 208–240V AC, Single Phase—With Thermal Overload Protection
Hardwire
53	53	46	40	33	23	2	60	5	1	9.2/6.3-4.6	1 1/2 (Female)	1 (Male)	17 13/16"	9 1/8"	8 3/16"	0000000	00000000	00000000	0000	00000000	000000
208–240V AC, 460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
53	53	46	40	33	23	2	60	5	1	1.1/3.3-2.2	1 1/2 (Female)	1 (Male)	16 9/16"	9 1/8"	7 3/8"	0000000	00000000	00000000	0000	00000000	000000

Circulation Pumps for Food and Beverage

Commonly used in food, beverage, and dairy processing, these pumps are 3-A certified to meet sanitary design standards. They have quick-clamp intake and discharge connections to facilitate cleaning. The discharge connection rotates 360° for easy connection to your line. Motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm						Intake (Female)		Discharge (Female)		Overall					Replacement Impellers
Max. Flow Rate, gpm	@ 30 ft. of Head	@ 40 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Tube Connection Type	For Tube OD	Tube Connection Type	For Tube OD	Lg.	Wd.	Ht.		Each		Each
120/240V AC, Single Phase—Without Thermal Overload Protection
Hardwire
70	70	40	40	700	1	11.8/5.9	Quick-Clamp	1 1/2"	Quick Clamp	1 1/2"	17 1/2"	6 1/2"	7 1/4"	00000000	000000000	0000000	0000000
208-240/460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
70	70	40	40	700	1	3.6/1.8	Quick-Clamp	1 1/2"	Quick Clamp	1 1/2"	15 5/8"	6 1/2"	7 1/4"	00000000	00000000	0000000	000000

Circulation Pumps for Fuel and Flammable Liquid

Pump fuel and flammable liquids, such as isopropyl alcohol and xylene. These pumps are rated for environments where hazardous material is present. Maximum temperature is 250° F or the boiling point of the liquid being pumped, whichever is lower. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

With Thermal Overload Protection

Pumps
	Flow Rate, gpm							Pipe Size		Overall						Replacement Impellers
Max. Flow Rate, gpm	@ 20 ft. of Head	@ 40 ft. of Head	@ 60 ft. of Head, gpm	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Intake (Female, NPT)	Discharge (Female, NPT)	Lg.	Wd.	Ht.	Specifications Met		Each		Each
208-240/460V AC, Three Phase—Hardwire
100	78	48	10	64	264	1	2.8/1.4	1 1/2	1	15 1/4"	10 7/8"	8 1/2"	CSA Certified, UL Listed	0000000	000000000	00000000	0000000

Maintenance Kit

00000000

Each

0000000

Without Thermal Overload Protection

Pumps
	Flow Rate, gpm								Pipe Size		Overall						Replacement Impellers
Max. Flow Rate, gpm	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 60 ft. of Head, gpm	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Intake (Female, NPT)	Discharge (Female, NPT)	Lg.	Wd.	Ht.	Specifications Met		Each		Each
120/208-240V AC, Single Phase—Hardwire
100	78	64	48	10	64	264	1	12/6	1 1/2	1	17 1/4"	10 7/8"	8 1/2"	CSA Certified, UL Listed	0000000	000000000	00000000	0000000

Maintenance Kit

00000000

Each

0000000

Circulation Pumps for Hot Oil

Transfer hot oil up to 650° F in demanding applications such as plastic mold injecting and chemical processing. These pumps have a totally enclosed fan-cooled (TEFC) motor for use in dusty, dirty, and damp environments. They are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

	Flow Rate, gpm							Intake (NPT)		Discharge (NPT)		Overall
Max. Flow Rate, gpm	@ 40 ft. of Head	@ 50 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	Max. Temp., °F	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each
240/460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
57	54	45	65	32	650°	1	3.6/1.8	1 1/2	Female	1 1/4	Female	19"	9"	10"	0000000	000000000

Constant-Flow-Rate Pumps for Water

Also known as gear pumps, these produce a smooth flow of liquid for applications such as cooling engines, powering hydraulic equipment, and extracting liquid from holding tanks. Pumps are self-priming after you fill the pump chamber with liquid. As liquid in the chamber is expelled, a suction force is created which allows the pump to draw liquid upward. Do not use with solids.

Pumps with a totally enclosed (TE) or totally enclosed fan-cooled (TEFC) motor can be used in dusty, dirty, and damp environments.

For technical drawings and 3-D models, click on a part number.

						Intake (NPT)		Discharge (NPT)			Overall
Max. Flow Rate, gpm	Discharge Pressure, psi	Max. Viscosity, cP	Temp. Range, °F	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Motor Enclosure Type	Lg.	Wd.	Ht.		Each
115/230V AC, Single Phase—Without Thermal Overload Protection
Hardwire
8.5	150	100,000	32° to 140°	1	12.8/6.4	1/2	Female	1/2	Female	Totally Enclosed	18 1/8"	9 3/16"	9"	0000000	000000000

Adjustable-Flow Electric Drum Pumps
for Water, Oil, Coolants, and Chemicals

Alter the flow rate for versatile dispensing. These pumps do not include a drum connector.

Pump Body Discharge

Pumps
								Intake		Discharge					Optional Drum Connectors		Repair Parts
	Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Max. Temp.	Horsepower	Current, A	For Drum Opening Size	Tube OD	Tube Lg.	Tube Connection Type	For Tube ID	Electrical Connection Type		Each		Each
120V AC, Single Phase—With Thermal Overload Protection
B	0-35	16	55	130°	1 hp	8.5	2"	1 5/8"	39"	Barbed	1"	Plug	0000000	000000000	0000000	000000	0000000
B	0-35	16	55	130°	1 hp	8.5	2"	1 5/8"	47"	Barbed	1"	Plug	0000000	00000000	0000000	00000	0000000
B	0-35	16	55	175°	1 hp	8.5	2"	1 1/2"	39"	Barbed	1"	Plug	0000000	00000000	0000000	00000	0000000
B	0-35	16	55	175°	1 hp	8.5	2"	1 1/2"	47"	Barbed	1"	Plug	0000000	00000000	0000000	00000	0000000
B	0-35	16	55	175°	1 hp	8.5	2"	1 5/8"	39"	Barbed	1"	Plug	0000000	00000000	0000000	00000	0000000

Electric Drum Pump Systems for
Water, Oil, Coolants, and Chemicals

NEMA L5-15

Including nozzles and connectors, these pumps come with everything you need to start pumping. All include a pump assembly, 1" ID hose, dispensing nozzle, drum connector, and storage bracket.

Pumps with an aluminum housing are often used with lubricating oil and coolants. Their motors are rated IP44.

Pumps with a polypropylene housing are often used with corrosives such as acid-washing solutions and cleaning and etching fluids. Their motors are rated IP44.

Pumps with a PVDF housing are often used with aggressive chemicals such as 98% nitric acid, hydrochloric acid, and sulfuric acid. Their motors are rated IP54.

Pumps with a 47" intake tube can be used with large totes and tanks.

				Temp. Range, °F					Intake		Discharge
Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	For Drum Opening Size	Tube OD	Tube Lg.	Tube ID	Tube OD	Tube Lg.	Environmental Rating		Each
120V AC, Single Phase—NEMA L5-15 Plug
Aluminum Housing
22	15	55	1,500	Not Rated	175°	1 hp	7.5	2 NPT	1 1/2"	39"	1"	1 1/4"	72"	IP44	0000000	000000000
22	15	55	1,500	Not Rated	175°	1 hp	7.5	2 NPT	1 1/2"	47"	1"	1 1/4"	72"	IP44	0000000	00000000
Polypropylene Plastic Housing
15	15	55	1,500	Not Rated	130°	1 hp	7.5	2 NPT	1 5/8"	39"	1"	1 1/4"	72"	IP44	0000000	00000000
15	15	55	1,500	Not Rated	130°	1 hp	7.5	2 NPT	1 5/8"	47"	1"	1 1/4"	72"	IP44	0000000	00000000
PVDF Plastic Housing
15	15	55	1,500	Not Rated	175°	1 hp	7.5	2 NPT	1 5/8"	39"	1"	1 1/4"	72"	IP54	0000000	00000000
15	15	55	1,500	Not Rated	175°	1 hp	7.5	2 NPT	1 5/8"	47"	1"	1 1/4"	72"	IP54	0000000	00000000

Sanitary Electric Drum Pumps

Nylon Plastic Housing

Commonly used in food, beverage, pharmaceutical, and cosmetic processing, these pumps are designed for sanitary environments. The discharge connection can be easily disassembled for cleaning. Pumps do not include a drum connector.

Pumps that are 3-A certified meet sanitary design standards. Those that are CSA certified meet stringent safety standards.

				Temp. Range, °F					Intake		Discharge
Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	For Drum Opening Size, mm	Tube OD	Tube Lg.	Tube Connection Type	For Tube OD	Thermal Protection	Specifications Met		Each
115V AC, Single Phase—Hardwire
Nylon Plastic Housing
31	10	55	1,000	15°	175°	1 hp	4.2	38	1 1/2"	39"	Quick Clamp	1 1/2"	With Thermal Overload Protection	3-A Certified 02-11; CSA Certified	0000000	000000000

High-Flow Sump Pumps without
Switch for Water with Small Solids

Use these pumps to move higher volumes of water with solids than other sump pumps. They activate when plugged in; add a plug-in switch to control when the pump activates. Also known as effluent pumps, they accommodate solids up to 3/4" in diameter. They are often used with liquid waste that has passed through a septic tank, so most solids are removed. Pumps have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Pumps with wire leads can be connected to a three-pronged plug or wired directly to a power source.

Max. Flow Rate, gpm								Discharge			Min. Sump Pit		Overall
@ 30 Ft. of Head	@ 40 Ft. of Head	@ 50 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
240V AC, Single Phase—With Thermal Overload Protection
Hardwire with 20 ft. Cord and Wire Leads
90	70	52	81	3/4"	35° to 140°	1 hp	10.2	2	NPT	Female	24"	30"	17"	15"	10"	00000000	0000000

Clog-Resistant Sump Pumps for Water

The intake is 2” from the base of the pump to prevent dirt at the bottom of your sump pit from clogging the pump. The float switch is wired to the pump. Use with debris-free water. Submerge while in use and do not run dry.

Max. Flow Rate, gpm				Level					Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Turn-On	Turn-Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 8 ft. Cord
81	66	49	22	9"	4"	40° to 120°	1 hp	9.8	1 1/2	NPT	Female	11"	18"	12"	10"	8"	0000000	0000000

High-Flow Sump Pumps without
Float Switch for Sewage Water

These pumps provide over 50% more flow than standard plug-in activated pumps for sewage water. They activate when plugged in. You can add a plug-in switch to control when the pump activates. Pumps are equipped with a large intake and rugged impeller to transfer raw sewage water with solids up to 2" in diameter. All have a cast iron housing that stands up to demanding environments. Pumps can run dry.

Pumps with wire leads can be connected to a three-pronged plug or wired directly to a power source.

Max. Flow Rate, gpm									Discharge				Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Wire Connection Type	Dia.	Dp.	Ht.	Wd.	Lg.		Each
200/240V AC, Single Phase—With Thermal Overload Protection
Hardwire with 30 ft. Cord
220	190	160	36	2"	35° to 100°	1 hp	8.8A/8.3A	Open	3	NPT	Female	Wire Leads	24"	30"	19"	10"	14"	0000000	000000000

Clog-Resistant Sump Pumps for Sewage
Water with Replaceable Float Switch

The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Also known as grinder pumps, they have stainless steel blades that prevent clogs by breaking down sewage into an easy-to-transfer slurry. Do not use with metal particles or debris that could damage blades. Pumps have a cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

120V AC, Single Phase—With Thermal Overload Protection

Max. Flow Rate, gpm								Level					Discharge			Min. Sump Pit		O'all
@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	@ 40 Ft. of Head	@ 50 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Dia.	Ht.		Each
Plug with 20 ft. Cord
42	39	37	31	20	6	55	3"	20"	12"	35° to 100°	1 hp	13	1 1/4	NPT	Female	18"	30"	12"	20"	0000000	000000000
42	39	37	31	20	6	55	3"	20"	12"	35° to 100°	1 hp	13	2	NPT	Female	18"	30"	12"	20"	0000000	00000000

Energy-Efficient Sump Pumps for Sewage Water

These pumps have a heavy duty motor with sealed bearings that generates a flow rate similar to our other sump pumps for sewage water while using fewer amps. Use them to transfer raw sewage water with solids up to 2" in diameter. The float switch is wired to the pump. Submerge while in use and do not run dry.

Max. Flow Rate, gpm						Level					Discharge			Min. Sump Pit		O'all
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Feet of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 25 ft. Cord
130	107	82	58	26	2"	32"	12"	35° to 100°	1 hp	8.8	2	NPT	Female	24"	33 1/16"	23"	9"	8"	00000000	000000000

Energy-Efficient Sump Pumps without
Float Switch for Sewage Water

Pumps have a heavy duty motor with sealed bearings that generates a flow rate similar to our other sump pumps for sewage water while using fewer amps. Connect them to a three-pronged plug or wire them directly to a power source to activate. You can also add a plug-in switch to control when the pump activates. Pumps transfer raw sewage water with solids up to 2” in diameter. Submerge while in use and do not run dry.

Max. Flow Rate, gpm										Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
240V AC, Three Phase—With Thermal Overload Protection
Hardwire with 25 ft. Cord
130	107	82	58	26	2"	35° to 100°	1 hp	3.1	Open	2	NPT	Female	24"	24"	20"	9"	8"	00000000	000000000

Ultra High-Flow Water-Removal Pumps without Switch

NEMA 6-15

Move higher volumes of water than with other high-flow water-removal pumps. These pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. A top-discharge design routes water through the pump to cool the motor. Install in water that’s at least 10" deep. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Max. Flow Rate, gpm								Discharge			Overall
@ 20 Ft. of Head	@ 30 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Removes Water Down To	Temp. Range	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
240V AC, Single Phase—With Thermal Overload Protection
6-15 NEMA Plug with 25 ft. Cord
82	61	52	3/8"	4"	35° to 120°	1 hp	6.3	1 1/2	NPT	Female	16"	7"	7"	0000000	0000000

Portable Sewage Water-Removal Pumps

Male Discharge

Female Discharge

Transfer raw sewage water that contains solids up to 2” in diameter. These pumps have a float switch with a separate cord that can unplug, so you can replace the switch without replacing the whole pump. The length of the float switch cord is adjustable. Turn-on and turn-off levels will vary according to the length of the cord. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Pumps with male discharge port have a horizontal discharge.

Pumps with female discharge port have a vertical discharge.

Max. Flow Rate, gpm						Level					Discharge (NPT)		Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Removes Water Down To	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Gender	Dia.	Dp.	Dia.	Ht.	Wd.		Each
240V AC, Single Phase
Hardwire with 25 ft. Cord
__	80	44	35	2"	5 1/2"	20"-22"	4"-12"	35° to 100°	1 hp	6.4	2	Male	22"	24"	__	19"	10"	0000000	0000000
100	78	41	33	2"	5 1/2"	20"-22"	4"-12"	35° to 130°	1 hp	6.3	2	Female	22"	24"	10"	18"	__	0000000	00000000

High-Head Submersible Pumps for Water

Also known as deep-well submersible pumps, use these pumps to transfer drinking water from wells and cisterns up to 25 ft. deep. They come with a control box that automatically disconnects from the system when the lid is opened, making servicing easier. Pumps are activated by a pressure switch and must be hardwired. Do not run dry.

							Discharge			Overall
Max. Flow Rate, gpm	Max. Ft. of Head, ft.	Removes Water Down To, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Ht.	Specifications Met		Each
240V AC, Single Phase—With Thermal Overload Protection
Hardwire
16	212	25	55° to 120°	1 hp	8	Screened	1 1/4	NPT	Female	3 7/8"	27"	NSF/ANSI Standard 61 for Drinking Water, UL Listed	0000000	000000000

Electric High-Vacuum Pumps

Quick Clamp Intake Connection

Achieve powerful vacuum and continuous flow for applications such as vacuum drying, solvent evaporation, and distillation. Maximum flow rate is the rate at which air is pumped before a vacuum is created. Flow rate steadily decreases as the pump generates the vacuum. The larger the tank, the longer it will take to form a vacuum. Tube and fitting ID will also affect flow.

						Intake			Overall
Max. Vacuum	Max. Flow Rate, cfm	Temp. Range, °F	Volume, dB	Horsepower	Current, A	Connection Style	Gender	Discharge Connection Style	Lg.	Wd.	Ht.	Oil Capacity, qt.		Each
115V AC, Single Phase—With Thermal Overload Protection
NEMA 5-15 Plug
3 × 10 ^-3 torr @ 72° F	12.8	50° to 100°	55	1 hp	8	Quick Clamp	Female	Quick Clamp Hose	22 3/8"	8 1/8"	11 3/8"	2.55	0000000	000000000

Hydraulic Power Units

Create and supply hydraulic pressure. Choose a unit with a tank capacity about three times greater than your requirement to allow for heat dissipation. An inlet filter protects the pump from contamination.

All units include an additional NPTF threaded inlet port. NPTF (Dryseal) threads are compatible with NPT threads. UN/UNF (SAE) thread connections have straight threads and are also known as O-ring Boss fittings.

				O'all			Inlet Connection— UN/UNF (SAE)		Inlet Connection— NPTF		Outlet Connection— UN/UNF (SAE)
Max. Flow Rate, gpm	Max. Pressure, psi	Power, hp	Cap., gal.	Lg.	Wd.	Ht.	Thread Size	Dash Size	Pipe Size	Dash Size	Thread Size	Dash Size	Full Load Current		Each
240V AC/460V AC, Three Phase
0.9	1,600	1	5	13"	15"	20 1/2"	7/8"-14	10	1/2	08	7/8"-14	10	1.5 A @ 460 V AC	00000000	000000000

Electric Pumps for Testing

Easier to use than manual pumps, these use electricity to quickly pump water through your system so you can test for leaks. They are also known as hydrostatic test pumps. They are portable so they can be lifted and moved to any location.

Style B is protected by a metal cage with rubber feet; it includes a 10-ft. hose for high-pressure applications.

							Outlet			Overall			Material
Style	For Use With	Max. Pressure Generated, psi	Max. Flow Rate, gpm	Horsepower, hp	Current, A	Input Voltage	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.	Body	Frame		Each
Portable Pumps with 3/4 GHT Female Inlet
B	Water	500	3	1	13.6	120V AC	1/2	NPT	Male	18"	16"	22"	Iron	Steel	0000000	000000000
B	Water	1,000	1	1	13.6	120V AC	1/2	NPT	Male	18"	16"	22"	Aluminum and Brass	Steel	0000000	00000000

High-Flow Low-Pressure Compressed Air Blowers

Also known as regenerative blowers, use these to produce high-flow compressed air with low pressure or vacuum to operate pump drives, lift tables, and conveying systems. Compressed air blowers are also used for drying, exhausting, and aeration.

Air circulates inside the blower housing to compress air, which generates pressure or vacuum. Single-stage blowers circulate air once and then exhaust.

Inverter-rated blowers have a motor that can run at slow speeds without overheating, so they can be used with a motor speed control (variable frequency drive).

Single Stage

Blowers
						Overall			Pipe Size				Air-Intake Filters		Relief Valves
Maximum Pressure	Max. Flow Rate @ psi	Vacuum Rating	hp	Full Load Current @ V AC	Vol., dB	Lg.	Wd.	Ht.	Inlet	Outlet		Each		Each		Each
Single Phase, 120/208/230V AC
NPT Female Inlet and Outlet
2 psi 52 in. of H₂O	92 cfm @ 0	3.5 in. of Hg 48 in. of H₂O	1	9.8 A @ 115 5.2 A @ 208 4.9 A @ 230	68	13"	11"	12"	1 1/2	1 1/2	0000000	0000000	00000000	0000000	00000000	0000000
Three Phase, 190/230/380/460V AC (Inverter Rated)
NPT Female Inlet and Outlet
2 psi 56 in. of H₂O	103 cfm @ 0	4.1 in. of Hg 56 in. of H₂O	1	2.2 A @ 380 4.4 A @ 190 3.7 A @ 230 2.1 A @ 460	64	11"	11"	12"	1 1/2	1 1/2	0000000	00000000	000000	00	000000	00
Three Phase, 208/230/460V AC
NPT Female Inlet and Outlet
2 psi 52 in. of H₂O	92 cfm @ 0	3.5 in. of Hg 48 in. of H₂O	1	3.4 A @ 208 3.2 A @ 230 1.6 A @ 460	68	13"	11"	12"	1 1/2	1 1/2	0000000	000000	00000000	000000	00000000	000000

Terms and Conditions and Privacy Policy

About Air Compressors

About Process Pumps

About Vacuum Pumps

How to Prime Your Pump

How to Determine Feet of Head

About Sump, Water-Removal, Condensate, and Submersible Pumps

About Drum Pumps

High-Head High-Efficiency CirculationPumps for Water, Coolants, and Oil

High-Efficiency Circulation Pumpsfor Water, Coolants, and Oil

High-Head Circulation Pumps for Water

Circulation Pumps for Water Sprinklers

Self-Priming Circulation Pumps for Water and Coolants

Harsh-Environment Self-PrimingCirculation Pumps for Water and Coolants

Immersion Circulation Pumps for Coolants

Remote-Mount Circulation Pumps for Water and Coolants

Stainless Steel Circulation Pumps for Chemicals

Extended-Life Plastic Circulation Pumps for Chemicals

Circulation Pumps for Food and Beverage

Circulation Pumps for Fuel and Flammable Liquid

Circulation Pumps for Hot Oil

Constant-Flow-Rate Pumps for Water

Adjustable-Flow Electric Drum Pumpsfor Water, Oil, Coolants, and Chemicals

Electric Drum Pump Systems forWater, Oil, Coolants, and Chemicals

Sanitary Electric Drum Pumps

High-Flow Sump Pumps withoutSwitch for Water with Small Solids

Clog-Resistant Sump Pumps for Water

High-Flow Sump Pumps withoutFloat Switch for Sewage Water

Clog-Resistant Sump Pumps for SewageWater with Replaceable Float Switch

Energy-Efficient Sump Pumps for Sewage Water

Energy-Efficient Sump Pumps withoutFloat Switch for Sewage Water

Ultra High-Flow Water-Removal Pumps without Switch

Portable Sewage Water-Removal Pumps

High-Head Submersible Pumps for Water

Electric High-Vacuum Pumps

Hydraulic Power Units

Electric Pumps for Testing

High-Flow Low-Pressure Compressed Air Blowers

High-Head High-Efficiency Circulation
Pumps for Water, Coolants, and Oil

High-Efficiency Circulation Pumps
for Water, Coolants, and Oil

Harsh-Environment Self-Priming
Circulation Pumps for Water and Coolants

Adjustable-Flow Electric Drum Pumps
for Water, Oil, Coolants, and Chemicals

Electric Drum Pump Systems for
Water, Oil, Coolants, and Chemicals

High-Flow Sump Pumps without
Switch for Water with Small Solids

High-Flow Sump Pumps without
Float Switch for Sewage Water

Clog-Resistant Sump Pumps for Sewage
Water with Replaceable Float Switch

Energy-Efficient Sump Pumps without
Float Switch for Sewage Water