Strengthened edges cut holes up to 4" dia. in fabric, leather, rubber, and soft metal. Also known as arch punches.

Make oblong holes in fabric, leather, and rubber. Also known as arch punches.

Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.

Sets include common ID and OD sizes to create gaskets and washers in two strikes.

For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.

Forged steel makes the body of this punch more durable than the Economy Plier-Action Multiple-Size Hole Punch.

Squeeze the spring-return handle to punch round holes of a single size.

Use a wrench to cut DIN-size holes in steel up to 1/16" thick.

These steel punches cut through aluminum and steel fast to make openings for DB connectors.

Rotate the angled head of the driver up to 180° to fit it into tight spaces and supply eight tons of force to the hole punches.

Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches.

The included hydraulic driver allows you to punch conduit up to size 2.

Rotate the angled head of the driver up to 180° to fit it into tight spaces and supply eight tons of force to stud-driven hole punches.

About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox.

These medium duty tools have more than double the punching force of compact portable lever-operated punches.

Use twice the punching force of standard extended-reach punches to make holes in structural steel channels and angle iron.

Our most powerful lever-operated punch, the rotary-action socket turns to deliver two to three times the punching force of other bench-mount lever-operated punches.

Turn the handle of these punches while pushing down to punch holes in cork and rubber.

Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece.

These high-speed steel saws cuts through aluminum, brass, bronze, and steel.

An extra-thick steel body with carbide teeth can cut through stainless steel structural framing and electrical enclosures.

Use these saws with a drill press to cut a variety of hole sizes in sheet metal.

These standard saws have high-speed steel teeth.

Specially designed teeth cut faster than the teeth on standard hole saws.

The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.

Quickly connect these saws to your drill or drill press with the built-in arbor.

The carbide teeth on these steel saws cut hard metal such as steel, stainless steel, cast iron, and titanium.

These kits have saws with high-speed steel teeth and a steel body.

The saws in these kits have carbide-grit-coated teeth that cut ceramic tile, fiberglass, masonry, plastic, and composites.

Impact-resistant steel makes these punches stronger and more durable than standard pin-removal punches.

Use these sets to knock out pins and rivets that have already been loosened.

The punches in these sets have a knurled handle, which offers a more secure grip than standard punches. Use them to knock out pins and rivets that have already been loosened.

A soft brass body minimizes the damage these punches make on work surfaces.

Knock out pins and rivets that have already been loosened. These tools are also known as pin punches.

Impact-resistant steel makes these punches stronger and more durable than standard pin-removal punches.

Made of materials that are Factory Mutual approved, these nonmagnetic, corrosion-resistant tools inhibit sparking. They satisfy OSHA requirements for nonsparking tools.

Contains pin-loosening, pin-removal, and center-marking punches as well as chisels.

Punch a hole in your material to prepare for the installation of fabric grommets. Strike these tools with a mallet.

Strike the punch with a mallet to set standard fabric snap halves.

Line up holes by driving these pins through existing rivet, pin, and bolt holes in multiple pieces of metal. Alternatively known as lineup taper punches.

These brass tools reduce marring on metal surfaces because they're softer than steel punches.

Made from aluminum-bronze that is Factory Mutual approved, these nonmagnetic, corrosion-resistant tools inhibit sparking. They satisfy OSHA requirements for nonsparking tools.

Sets include three punches in various point diameters to set nails flush or drive them out of view without damaging wood surfaces.

Fit these through existing holes and mark the center of the hole in a second workpiece.

These sets come with three punches for use with a variety of hole sizes. Insert one into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size.

Also known as blind-hole spotters, these punches fit into closed-end holes and mark the center of a complementary hole.

Push down on the spring-loaded cone to center the punch in a variety of round and square hole sizes.

The punches in these sets have a uniform shoulder height so you can quickly transfer multiple hole locations at once. Also known as transfer screws.

Also known as transfer screws, the punches in these sets can be used in any threaded hole to transfer the hole location. Use the handle to screw a punch into a hole.

With an internal spring mechanism, these Starrett punches offer one-hand operation when marking hole centers.

Also known as center punches, strike these with a hammer to mark hole centers in metal and other materials.

Use the Starrett punches in these sets to mark hole centers in metal and other materials. Also known as center punches.

Made of aluminum-bronze that is Factory Mutual approved, these nonmagnetic, corrosion-resistant tools inhibit sparking.

An insulated handle and shaft protects against shock from accidental contact with live electrical circuits. These awls are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

These pins have a flat head to fit into a counterbored hole.

Use these pins with a die to punch 3/16" and larger holes. Pins can be modified to fit your application.

A thick shoulder makes these pins more rigid than standard ejector pins.