Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications.

Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side.

Smaller than standard push toggle clamps, these are often used for electronics and small fixturing applications.

Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp.

Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side.

Secure these clamps to a rail or bar.

Drill a hole to mount these clamps through a surface and secure the mounting flange with screws. The plunger can be locked at any position along its travel.

Lock the nose into the retracted position by pulling the knob and rotating it 90°.

Lock the nose into the retracted position by pulling the handle and rotating it 90°.

Thread onto machinery or attach a knob or handle to the threaded spindle.

Lock the nose into the retracted position by pulling the ring and rotating it 90°.

Two holes in the plate allow these plungers to be mounted to a flat surface.

A T-handle makes these spring plungers easy to grip.

A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.

Add a knob or handle to the threaded shank.

Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.

Install with a hex key for more torque than slotted long-nose spring plungers.

Noses are up to four times longer than standard long-nose press-fit spring plungers.

Designed with a flange to keep the plunger from being pushed through a hole when the ball is depressed.

Install with a hex key for more torque than slotted ball-nose spring plungers.