Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

Even when used under water, these adhesives maintain their strength.

Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.

Seal leaks around fasteners with a protruding head.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.

Also known as sloshing compounds, these surface fillers bond to rough, rusty surfaces in fuel tanks to repair leaks and prevent further corrosion.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

Fill cracks up to 10" deep on vertical and overhead surfaces.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

For use when thickness will be less than 2", sand mixes consist of cement and sand.

Patch concrete floors, stairs, and walls with these compounds.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon.

Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.

These long, thin brushes have semi-soft bristles to smooth out wrinkles and air bubbles after wall coverings are applied without damaging the wall covering itself.

Remove hardened flecks of mortar, dirt, and other debris.

Smooth and spread grout between tiles.

A thin, flexible blade makes easy work of smoothing and feathering drywall compound.

Also known as mud pans, use these to mix small amounts of drywall compound or to bring it to your work area.

Cut perfect circles up to 16" in diameter to create openings for pipes, conduit, or lighting fixtures.

Thicker than taping knives, trowels can apply and spread large amounts of drywall compound quickly.

These crack fillers come in an easy-to-pour jug for filling cracks in asphalt up to 1/2” wide.

Mend rips, tears, and holes on vinyl surfaces, such as awnings and upholstery, with these flexible, waterproof surface fillers.

Press these putty-like fillers into cracks in wood up to 1/8" wide.

Fill cracks with these coatings to stop leaks and deaden sound.

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.

Assortments include two 4" × 4" patches and a 6" × 6" patch.

Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.

Also known as drywall mud, these joint compounds are ready to use. Apply with drywall tape over seams for a finished appearance.

Tape hides seams and smooths out corners. Joint compound is required for bonding and finishing.

Simplify and speed up hole repairs—stick a patch over the area and cover with spackling compound.

With a durable one-piece construction, these boxes have no seams or welds to crack and leak.

Use floats after edging and grooving to smooth the surface and allow trapped air and water to escape.

Drag these brooms along hardening concrete to create a rough surface for traction in slippery environments.

Improve the strength of your concrete mix by eliminating trapped air.

Make removing form-board stakes easier.

Make temporary waterproof seals that peel off when no longer needed.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

This sealant includes a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

Make tough, flexible, oil-resistant seals.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants don't degrade in sunlight.

Make seals that support glass under heavy loads in equipment and buildings.

Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application.