ABS Plastic Putty | McMaster-Carr

Clear All

	For Use On For Use On	Show

ABS Plastic

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	Container Type Container Type


Can	Jar

Stick	Strip

Pail	Tube

Cartridge	Syringe

Single-Use Packet	Bottle

Patch	Aerosol Can

Mixer Cup	Pen

Jug

	Color Color

	Black		Gray
	Aluminum		White
	Blue		Clear
	Off-White		Green
	Red		Amber
	Yellow		Brown

	For Joining For Joining

	Formulation Formulation

	Consistency Consistency

	Type Type

Surface Filler

Adhesive

Sealant

	Reaches Full Strength Reaches Full Strength

	Maximum Temperature Maximum Temperature

Less than 500° F

500° to 999° F

	Manufacturer Manufacturer

	Begins to Harden Begins to Harden

	Minimum Temperature Minimum Temperature

	Mixing Required Mixing Required

Yes

	Manufacturer Model Name Manufacturer Model Name

Fixmaster Epoxy

Fixmaster Poxy Pak™

Fixmaster Underwater Repair
Epoxy

	For Use Outdoors For Use Outdoors

Yes

	Clarity Clarity

Clear

Semi-Clear

Opaque

	Length Length

	Adhesive Type Adhesive Type

Glue

Structural

	Container Size Container Size

	Elongation Elongation

	Finishing Method Finishing Method

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Manufacturer Model Number Manufacturer Model Number

View catalog pages (15)

Forward

How can we improve?

69 Products

About Sealant Flexibility

About Structural Adhesives

Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.

Surface fillers in a cartridge come with a mixer nozzle, but require a gun (sold separately) for dispensing. For best results, use a primer (sold separately).

Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. Use with most rigid and semi-rigid types of plastic. They meet NSF/ANSI 61 for use with drinking water.

Container
Size	Type	Begins to Harden	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
1.7 oz.	Cartridge	5 min.	30 min.	Thick Liquid	1:1	11 sq. in. @ 1/4"	-20° to 180°	Gray	Sand	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	000000
1.7 oz.	Cartridge	20 sec.	60 min.	Thick Liquid	1:1	11 sq. in. @ 1/4"	-20° to 180°	Amber	Sand	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	00000
1.7 oz.	Cartridge	50 sec.	60 min.	Thick Liquid	1:1	11 sq. in. @ 1/4"	-20° to 180°	Black	Sand	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	00000
4 oz.	Stick	20 min.	24 hrs.	Putty	__	16 sq. in. @ 1/4"	-40° to 250°	Off-White	Drill, Sand, Saw	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic	0000000	0000

Replacement Plunger for Surface Fillers in a Cartridge	Each	00000
Primer for Surface Fillers in a Cartridge	Each	00000
Replacement Mixer Nozzle for Surface Fillers in a Cartridge	Each	0000
Dispensing Gun for Surface Fillers in a Cartridge	Each	00000

Light-Activated Surface Filler Pens for Plastic

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure. Surface fillers work with most kinds of plastic, as well as wood, particleboard, and medium density fiberboard (MDF).

Pens

Formulation	Container Size, oz.	Begins to Harden, sec.	Reaches Full Strength, sec.	Consistency	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On	Batteries Included		Each
Acrylic	0.2	3	15	Gel	Yes	0° to 245°	Clear	Drill, Sand	Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PVDF Plastic, Vinyl Plastic, Fiberglass, Wood	Yes	0000000	000000

Refill Cartridges

Formulation	Color	Clarity	Consistency	Container Size, oz.		Each
Acrylic	Black	Opaque	Gel	0.2	0000000	000000
Acrylic	Clear	Clear	Gel	0.2	0000000	00000
Acrylic	Dark Brown	Opaque	Gel	0.2	0000000	00000
Acrylic	Light Brown	Opaque	Gel	0.2	0000000	00000
Acrylic	White	Opaque	Gel	0.2	0000000	00000

Aerosol Surface Fillers for Plastic

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon. Surface fillers are clear when dry. They cannot be sold to Canada due to local chemical regulations.

Match the appearance of the surface filler to your part. Satin reflects the most light and seems to shine. Matte reflects almost no light and appears dull. Eggshell reflects some light but is duller than satin.

Appearance	Container Size, oz.	Spray Position	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Approximate Coverage @ Thick.	Max. Thick., mil	For Use Outdoors	Temp. Range, °F	Color	For Use On	Cannot Be Sold To		Each
Satin	16	Upright	5	60	Thin Liquid	15 sq. ft. @ 1 mil	1	No	45° to 100°	Clear	Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon	Canada	0000000	000000
Matte	16	Upright	5	60	Thin Liquid	15 sq. ft. @ 1 mil	1	No	45° to 100°	Clear	Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon	Canada	0000000	00000
Eggshell	16	Upright	5	60	Thin Liquid	15 sq. ft. @ 1 mil	1	No	45° to 100°	Clear	Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon	Canada	0000000	00000

Surface Fillers

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy
EA 445	0.1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 445	1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 9131	0.1 oz.	Mixer Cup	90	24 hrs.	Thick Liquid	1.5:1	1 sq. in. @ 1/4"	-65° to 180°	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	00000
														Each
Loctite® Fixmaster Poxy Pak™
EA 9017	0.8 oz.	Syringe	5	60 min.	Thick Liquid	1:1	Not Rated	-65° to 300°	Clear	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Concrete, Glass, Wood	__	0000000	0000

Surface Filler Patches

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Surface Fillers
Lg.	Wd.	Begins to Harden, min.	Reaches Full Strength, hrs.	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
2"	12"	1	24	1:1	Yes	-85° to 220°	Red	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	000000
2"	20"	1	24	1:1	Yes	-85° to 220°	Amber	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
4"	6"	1	24	1:1	Yes	-85° to 220°	Blue	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
4"	12"	1	24	1:1	Yes	-85° to 220°	Green	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000

Light-Activated Surface Fillers

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Epoxy fillers provide better adhesion and more corrosion resistance than polyester fillers.

	Container
Formulation	Size, oz.	Type	Begins to Harden, sec.	Reaches Full Strength, min.	Consistency	For Max. Crack Wd.	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Polyester	3.5	Tube	1	3	Putty	1"	24 sq. in. @ 1/4"	1/2"	Yes	-40° to 220°	White	Drill, Sand, Tap	Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	00000000	000000
Epoxy	3.5	Bottle	1	5	Putty	1"	24 sq. in. @ 1/4"	1/2"	Yes	-40° to 270°	Amber	Drill, Sand, Tap	Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	00000000	00000

Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

Paste fillers resist alkalies, solvents, gasoline, and oil.

	Container
Mfr. Model No.	Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Underwater Repair Epoxy
EA 9490	4	Stick	15	60 min.	Putty	__	16 sq. in. @ 1/4"	1/4"	Yes	Not Rated to 300°	White	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Concrete, Wood	0000000	000000
Surface Fillers
__	2	Tube	5	24 hrs.	Paste	1:1	12 sq. in. @ 1/4"	1/2"	Yes	Not Rated to 200°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
__	2	Jar, Bottle	20	60 min.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
__	2	Jar, Bottle	20	60 min.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
__	12	Jar	30	24 hrs.	Paste	1:1	85 sq. in. @ 1/4"	1"	Yes	50° to 210°	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	0000000	00000
__	14	Can, Jar	20	60 min.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
__	14	Can, Jar	20	60 min.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
__	24	Can	30	24 hrs.	Paste	1:1	170 sq. in. @ 1/4"	1"	Yes	50° to 210°	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	0000000	00000
__	48	Can	30	24 hrs.	Paste	1:1	340 sq. in. @ 1/4"	1"	Yes	50° to 210°	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	0000000	00000

Water-Resistant Surface Filler Kits

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

West System 105K Kits

Includes	Formulation	Consistency	For Use Outdoors	Temp. Range, °F	Finishing Method	For Use On		Each
8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves	Epoxy	Thin Liquid	Yes	35° to 130°	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, ABS Plastic, PVC Plastic, Fiberglass, Wood	0000000	000000

West System Replacement Parts

			Container
Component	No. of Pieces	Mfr. Model No.	Size	Type	Lg.	Wd.		Each
Two-Part Epoxy	6	101-TS	0.5 oz.	One-Time-Use Packet	__	__	0000000	000000
Resin	1	105	1 qt.	Can	__	__	0000000	00000
Fast Hardener	1	205	7 oz.	Can	__	__	0000000	00000
Slow Hardener	1	206	7 oz.	Can	__	__	0000000	00000
Colloidal Silica Filler	1	406	1.7 oz.	Canister	__	__	0000000	00000
Colloidal Silica Filler	1	406	5.5 oz.	Canister	__	__	0000000	00000
Low-Density Filler	1	410	5 oz.	Canister	__	__	0000000	00000
Mini Dispensing Pump	3	300	__	__	__	__	0000000	00000
Fiberglass Cloth	1	745	__	__	30"	30"	0000000	00000

Coolant-Resistant Surface Fillers

Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Temp. Range, °F	Color	For Use On		Each
16	Jug	7	10	Thick Liquid	Not Rated to 500°	Brown	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	000000

Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.

Container
Size, pt.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
1.5	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	000000
3	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	00000

Putty-to-Rubber Moldable Glue

This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.

Container
Size, oz.	Type	Begins to Harden	Reaches Full Strength	Elongation	Temp. Range, °F	Color	For Joining	Pkg. Qty.		Pkg.
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Black	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	000000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Blue, Red, Yellow	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Gray	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	White	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000

Waterproof Epoxy Structural Adhesives

Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.

The size listed is the combined total of the two parts. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.

WaterWeld and 11800, as well as one-time-use packets, can be applied to wet surfaces or under water.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
WaterWeld	8277	2	Stick	25 min.	60 min.	900	Not Rated	Putty (Not Rated)	Not Rated to 300°	Off-White	Salt Spray, Submersible	Metal, Plastic, Rubber, Composites	0000000	00000

Devcon Adhesives

	Container				Strength
Mfr. Model No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
11800	16	Pail	45 min.	24 hrs.	2,600	1:1	Putty	40° to 250°	Gray	Submersible	Metal, Plastic, Composites	0000000	0000000

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
HighHeat	8297	2	Stick	60 min.	8 hrs.	900	Not Rated	Putty (Not Rated)	-20° to 450°	Gray	Metal, Plastic, Rubber, Composites, Masonry	000000	00000
PlasticWeld	8237	2	Stick	20 min.	24 hrs.	900	Not Rated	Putty (Not Rated)	-20° to 300°	Off-White	Plastic, Rubber, Composites, Masonry	000000	0000

Quick-Set Epoxy Structural Adhesives

For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.

The size listed is the combined total of the two parts.

50132 works especially well on plastics and composites.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
PlasticWeld	50132	0.85	Syringe	5 min.	60 min.	2,000	Not Rated	1:1	Thick Liquid (9,000 cP)	-20° to 300°	Yellow	Metal, Plastic, Rubber, Composites, Masonry, Wood	000000	00000

Slow-Set Epoxy Structural Adhesives

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Max. Temperature, °F	For Joining		Each
Original	50165	0.85	Syringe	4 hrs.	24 hrs.	1,800	Not Rated	1:1	Paste (150,000 cP)	550°	Metal, Plastic, Rubber, Composites, Glass, Masonry	000000	00000

Urethane Structural Adhesives

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Plastic Bonder	50139	0.85	Syringe	15 min.	30 min.	1,000	Not Rated	1:1	Thick Liquid (50,000 cP)	-20° to 250°	Black	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood	000000	00000

Non-Hardening Caulk

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Butyl rubber has a sticky, gummy consistency.

Butyl mastic has a clay-like consistency.

3M Butyl Rubber Strip

Butyl Rubber Strip

									Black
Mfr. Model No.	Wd.	Thick.	Lg., ft.	Tensile Strength	Hardness	Temp. Range, °F	For Joining	Number of Pieces		Each
08578	5/16"	5/16"	1	Not Rated	Not Rated	-20° to 200°	Metal Plastic Asphalt Composites Glass Masonry Wood	60	0000000	000000

Butyl Mastic Strip

							Brown		Gray
Dia.	Lg., ft.	Tensile Strength	Hardness	Temp. Range, °F	For Joining	Number of Pieces		Each		Each
3/16"	30	Not Rated	Not Rated	-30° to 150°	Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood	8	000000	00	00000000	00000
3/16"	45	Not Rated	Not Rated	-30° to 150°	Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood	8	00000000	00000	0000000	0000
3/16"	90	Not Rated	Not Rated	-30° to 150°	Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood	8	00000000	0000	0000000	0000

Caulking Tape

Press this adhesive-backed plastic tape into place for an immediate light-duty seal. It has a score line for easy installation in a corner.

PET Plastic with Butyl Rubber Adhesive
Wd.	Thick.	Lg., ft.	Reaches Full Strength	Tensile Strength	Hardness	Temp. Range, °F	For Joining	Color		Each
7/8"	1/4"	11	12 hrs.	Not Rated	Not Rated	55° to 80°	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	White	0000000	00000

UV-Resistant Glass Sealants

These sealants don't degrade in sunlight. Also known as glazing compounds, use these sealants to install glass in framing. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance.

	Container
Mfr. Model No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Elongation	Joint Compression/ Expansion Tolerance	Hardness	Temp. Range, °F	Specifications Met	For Joining	Choose a Color		Each
Sika Sikaflex Silicone
295	10.1	Cartridge	60 min.	72 hrs.	700%	-50% to 50%	Soft (Durometer 25A)	-40° to 190°	__	Plastic Plastic to Glass Rubber Rubber to Glass	Black, White	000000	000000
Silicone
__	10.1	Cartridge	30 min.	24 hrs.	475%	-25% to 25%	Soft (Durometer 20A)	-75° to 400°	FDA Compliant 21 CFR 175.105, FDA Compliant 21 CFR 177.2600, Fed. Spec. TT-S-001543A Type II Class A, Fed. Spec. TT-S-00230C Type II Class A, NSF/ANSI 51	Metal Metal to Glass Plastic Plastic to Glass Rubber Rubber to Glass Composites Composites to Glass Glass Masonry Wood Wood to Glass	Aluminum, Black, Clear, White	0000000	0000