Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Apply acrylic compounds to dry surfaces. Apply asphalt compounds to wet or dry surfaces.

Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.

Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls. Backing is rubberized asphalt adhesive. Roll can be cut to size.

Stop slow-flowing and weeping leaks in concrete. These crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Polyurethane fillers are thin to penetrate deep into cracks. When fully cured they create a seal that can withstand pressure of up to 2,000 psi. Apply with a standard caulk gun (sold separately). For especially large cracks, use a packer (sold separately) with a grease gun or a grout pump.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink. When fully cured they create a seal that can withstand pressure of up to 2,000 psi. Apply with a dispensing gun (sold separately). The size listed is the combined total of the two parts. A mixer nozzle is included.

Spread patching compounds in dry, wet, and even water-filled holes. Compress them with a tamper or shovel and they are immediately ready for traffic.

Cut rope to the length you need, pack it in cracks up to 1" wide, and heat with a propane torch (not included). Rope is self-leveling.

These crack fillers come in an easy-to-pour jug for filling cracks in asphalt up to 1/2" wide. They’re ready for traffic in 2 to 5 days.

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring. Apply with a grout float.

Acrylic grout does not require mixing. It resists shrinking, cracking, and staining.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).

Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.

The textured finish matches concrete surfaces. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Apply these sealants on wet surfaces and in cold temperatures. They're non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Apply these sealants on wet surfaces and in cold temperatures. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Sealants that begin to harden in 3 minutes are ideal for sealing pavement saw cuts made when installing buried sensing wires, also known as detector loops. You can walk or drive over the seams right away because they dry tack free within minutes.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.

Sealants that cannot be sold to the listed areas exceed VOC (Volatile Organic Compounds) regulations.

Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater. They're non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.

Elongation indicates flexibility—the higher the value is, the more joint movement a sealant can sustain.

Keep out the elements by sealing roof joints. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. They're good for use in environments with wide temperature fluctuation.