Container Type Container Type |
---|
![]() | ![]() | ![]() |
Strip | Cartridge | Stick |
![]() | ![]() | ![]() |
Single- Use Packet | Syringe | Sausage Pack |
For Use On For Use On | Show |
---|
|
For Use On For Use On | Hide |
---|
For Joining For Joining |
---|
Formulation Formulation |
---|
|
|
Consistency Consistency |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Adhesive Type Adhesive Type |
---|
|
Clarity Clarity |
---|
|
Viscosity Viscosity |
---|
|
|
Manufacturer Model Name Manufacturer Model Name |
---|
|
Shear Strength Shear Strength |
---|
|
Approximate Coverage Approximate Coverage |
---|
|
More
More
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | Black | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 000000 |
0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | Blue, Red, Yellow | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | Gray | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | White | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
These machinable epoxies are mixed with metal so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
8267 is reinforced with steel, but won't rust.
Mfr. Model | Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
SteelStik | 8267 | 2 | Stick | 5 min. | 60 min. | 900 | Not Rated | Not Rated | -20° to 300° | Gray | Metal, Rubber, Composites, Masonry | 000000 | 00000 |
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
Mfr. Model | Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
HighHeat | 8297 | 2 | Stick | 60 min. | 8 hrs. | 900 | Not Rated | Putty (Not Rated) | -20° to 450° | Gray | Metal, Plastic, Rubber, Composites, Masonry | 000000 | 00000 |
PlasticWeld | 8237 | 2 | Stick | 20 min. | 24 hrs. | 900 | Not Rated | Putty (Not Rated) | -20° to 300° | Off-White | Plastic, Rubber, Composites, Masonry | 000000 | 0000 |
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
Original | 50165 | 0.85 | Syringe | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (150,000 cP) | Not Rated to 550° | Metal, Plastic, Rubber, Composites, Glass, Masonry | 000000 | 00000 |
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts.
50132 works especially well on plastics and composites.
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
PlasticWeld | 50132 | 0.85 | Syringe | 5 min. | 60 min. | 2,000 | Not Rated | 1:1 | Thick Liquid (9,000 cP) | -20° to 300° | Off-White | Metal, Plastic, Rubber, Composites, Masonry, Wood | 000000 | 00000 |
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Plastic Bonder | 50139 | 0.85 | Syringe | 15 min. | 30 min. | 1,000 | Not Rated | 1:1 | Thick Liquid (50,000 cP) | -20° to 250° | Black | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood | 000000 | 00000 |
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Butyl rubber has a sticky, gummy consistency.
Black | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Wd. | Thick. | Lg., ft. | Tensile Strength | Hardness | Temp. Range, °F | For Joining | Number of Pieces | Each | |
08578 | 5/16" | 5/16" | 1 | Not Rated | Not Rated | -20° to 200° | Metal Plastic Asphalt Composites Glass Masonry Wood | 60 | 0000000 | 000000 |
These sealants don't degrade in sunlight. Also known as glazing compounds, use these sealants to install glass in framing. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, these sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | Specifications Met | For Joining | Choose a Color | Each | |
Silicone | ||||||||||||
10.1 | Cartridge | 30 min. | 24 hrs. | 475% | -25% to 25% | Soft (Durometer 20A) | -75° to 400° | FDA Compliant 21 CFR 175.105, FDA Compliant 21 CFR 177.2600, Fed. Spec. TT-S-001543A Type II Class A, Fed. Spec. TT-S-00230C Type II Class A, NSF/ANSI 51 | Metal Metal to Glass Plastic Plastic to Glass Rubber Rubber to Glass Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 |
Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application. They’re non-sagging, so they won't drip from vertical and overhead surfaces. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation. They’re crash tested and meet Federal Motor Vehicle Safety Standard 212 for windshield mounting.
Elongation indicates flexibility—the higher the value is, the more joint movement a sealant can sustain.
A primer is required. For best results use P591 for composites, glass, and fiberglass and P592 for aluminum, steel, and stainless steel.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
3M Polyurethane | |||||||||||||
590 | 10.5 | Cartridge | 40 min. | 24 hrs. | 700% | 1,200 | Medium Hard (Durometer 60A) | 40° to 95° | -40° to 200° | Metal Metal to Glass Composites Composites to Glass Glass | Black | 0000000 | 000000 |
590 | 20.3 | Sausage Pack | 40 min. | 24 hrs. | 700% | 1,200 | Medium Hard (Durometer 60A) | 40° to 95° | -40° to 200° | Metal Metal to Glass Composites Composites to Glass Glass | Black | 0000000 | 00000 |