These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Use these two-part compounds to patch concrete floors and stairs in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Seal joints and gaps in concrete.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.