EPDM Rubber Putty | McMaster-Carr

Choose a Category

Clear All

	Container Type Container Type


Cartridge	Jar

Can	Tube

Syringe	Bottle

Patch

	For Use On For Use On	Show

EPDM Rubber

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	Color Color

	Gray		Black
	White		Green
	Red		Blue
	Amber		Yellow

	Type Type

Surface Filler

Adhesive

	Maximum Temperature Maximum Temperature

Less than 500° F

	Formulation Formulation

	For Use Outdoors For Use Outdoors

Yes

	Finishing Method Finishing Method

	Reaches Full Strength Reaches Full Strength

	For Joining For Joining

Plastic to Composites

	Begins to Harden Begins to Harden

	Consistency Consistency

Putty

Paste

Thick Liquid

	Clarity Clarity

Opaque

	Mixing Required Mixing Required

Yes

	Container Size Container Size

	Minimum Temperature Minimum Temperature

	Mix Ratio Mix Ratio

1:1

2.6:1

5:1

	Maximum Thickness Maximum Thickness

1/4"

1/2"

1 1/2"

	Approximate Coverage @ Thickness Approximate Coverage @ Thickness

	Manufacturer Manufacturer

Devcon

J-B Weld

Loctite®

	Width Width

12"

20"

	Length Length

	Elongation Elongation

100%

View catalog pages (6)

Forward

How can we improve?

17 Products

About Structural Adhesives

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Surface Fillers
Lg.	Wd.	Begins to Harden, min.	Reaches Full Strength, hrs.	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
2"	12"	1	24	1:1	Yes	-85° to 220°	Red	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	000000
2"	20"	1	24	1:1	Yes	-85° to 220°	Amber	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
4"	6"	1	24	1:1	Yes	-85° to 220°	Blue	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
4"	12"	1	24	1:1	Yes	-85° to 220°	Green	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000

Light-Activated Surface Filler Patches

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. When exposed to sunlight or a UV lamp, they begin to harden immediately. Patches are waterproof.

Formulation	Lg.	Wd.	Begins to Harden, sec.	Reaches Full Strength, min.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Polyester	6"	3"	1	50	Yes	-40° to 350°	Yellow	Drill, Sand	Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Concrete	0000000	00000

Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Paste fillers resist alkalies, solvents, gasoline, and oil.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
2	Tube	5	24 hrs.	Paste	1:1	12 sq. in. @ 1/4"	1/2"	Yes	Not Rated to 200°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	000000
2	Jar, Bottle	20	60 min.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
2	Jar, Bottle	20	60 min.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
14	Can, Jar	20	60 min.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
14	Can, Jar	20	60 min.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000

Surface Fillers for Plastic

Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.

Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Devcon Flexane 80 Putty
15820	1 lbs.	Can	20 min.	7 days	Putty	2.6:1	90 sq. in. @ 1/4"	-40° to 180°	Black	Sand	Vinyl Plastic, EPDM Rubber, SBR Rubber	00000000	000000

Surface Fillers for Rubber

Repair worn and torn rubber parts. These two-part fillers are self leveling to form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps. The size listed is the combined total of the two parts.

For best results, sand or grind the damaged area to improve adhesion. Brush away loose material. Prepare the surface with cleaner and etching agent (sold separately). Use a dispensing gun and mixer nozzle (not included) to apply the fillers, and smooth with the included plastic spatula.

	Container
Mfr. Model No.	Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	For Use On		Each
Loctite® Surface Fillers
PC 7350	13.5	Cartridge	7	2	Thick Liquid	1:1	1/4"	Yes	-20° to 180°	Black	Polyurethane Rubber, EPDM Rubber	000000	0000000

Etching Agent (3-oz. Bottle)	000000	Each	000000
Urethane Cleaner (4-oz. Bottle)	000000	Each	00000
Dispensing Gun	0000000	Each	000000
Mixer Nozzle	000000	Each	0000

Urethane Structural Adhesives

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Plastic Bonder	50139	0.85	Syringe	15 min.	30 min.	1,000	Not Rated	1:1	Thick Liquid (50,000 cP)	-20° to 250°	Black	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood	000000	00000

Terms and Conditions and Privacy Policy