Galvanized Steel Putty | McMaster-Carr

Clear All

	For Use On For Use On	Show

Galvanized Steel

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	Container Type Container Type


Can	Jar

Stick	Strip

Tube	Syringe

Single-Use Packet	Bottle

Aerosol Can	Pen

Jug

	For Joining For Joining

	Color Color

	Black		Gray
	White		Blue
	Clear		Red
	Amber		Yellow
	Brown

	Consistency Consistency

	Reaches Full Strength Reaches Full Strength

	Type Type

Surface Filler

Adhesive

Sealant

	Formulation Formulation

	Adhesive Type Adhesive Type

Glue

Temporary

Structural

	Maximum Temperature Maximum Temperature

Less than 500° F

500° to 999° F

	Begins to Harden Begins to Harden

	Manufacturer Manufacturer

Loctite®

J-B Weld

	Manufacturer Model Number Manufacturer Model Number

	Manufacturer Model Name Manufacturer Model Name

	Width Width

	Thickness Thickness

1/8"

1/4"

5/16"

	Mixing Required Mixing Required

Yes

	Minimum Temperature Minimum Temperature

	Elongation Elongation

100%

Not Rated

	Clarity Clarity

Clear

Semi-Clear

Opaque

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Container Size Container Size

	Viscosity Viscosity

View catalog pages (13)

Forward

How can we improve?

29 Products

About Sealant Flexibility

About Structural Adhesives

Repair stripped threads on female connections, such as oil pans, valve covers, and distributor caps. Apply the included release agent to a male fastener that fits your female connection. Then mix the two-part filler and apply to the stripped threads. Screw in the male fastener, let it set up for five minutes, and remove. The new threads can be used in two hours. The container size listed is the combined total of the two-part filler.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.

	Container
Mfr. Model No.	Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Form-A-Thread®
PC 3967	0.3	Syringe, Bottle	5	2	Putty	1:1	Yes	-65° to 300°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Galvanized Iron, Galvanized Steel, Silver	000000	000000

Aerosol Surface Fillers

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.

Container Size, oz.	Begins to Harden, min.	Reaches Full Strength, hrs.	Approximate Coverage @ Thickness	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
11	10	24	9 sq. ft. @ 2 mil	Yes	50° to 90°	Gray	Sand	Aluminum, Brass, Bronze, Copper, Galvanized Iron, Galvanized Steel, Iron, Steel, Stainless Steel, Silver, Titanium, Fiberglass, Wood	000000	00000

Light-Activated Surface Filler Pens

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure. They can be used with most types of metal as well as ceramic, stone, and porcelain.

Pens

Formulation	Container Size, oz.	Begins to Harden, sec.	Reaches Full Strength, sec.	Consistency	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On	Batteries Included		Each
Acrylic	0.2	3	12	Gel	Yes	0° to 245°	Clear	Drill, Sand	Aluminum, Brass, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Ceramic, Porcelain, Stone	Yes	000000	000000

Refill Cartridges

Formulation	Color	Clarity	Consistency	Container Size, oz.		Each
Acrylic	Black	Opaque	Gel	0.2	000000	000000
Acrylic	Clear	Clear	Gel	0.2	000000	00000
Acrylic	White	Opaque	Gel	0.2	000000	00000

Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Paste fillers resist alkalies, solvents, gasoline, and oil.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
2	Tube	5	24 hrs.	Paste	1:1	12 sq. in. @ 1/4"	1/2"	Yes	Not Rated to 200°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	000000
2	Jar, Bottle	20	60 min.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
2	Jar, Bottle	20	60 min.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
14	Can, Jar	20	60 min.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
14	Can, Jar	20	60 min.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000

Coolant-Resistant Surface Fillers

Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Temp. Range, °F	Color	For Use On		Each
16	Jug	7	10	Thick Liquid	Not Rated to 500°	Brown	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	000000

Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.

Container
Size, pt.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
1.5	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	000000
3	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	00000

Putty-to-Rubber Moldable Glue

This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.

Container
Size, oz.	Type	Begins to Harden	Reaches Full Strength	Elongation	Temp. Range, °F	Color	For Joining	Pkg. Qty.		Pkg.
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Black	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	000000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Blue, Red, Yellow	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Gray	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	White	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000

Optically Clear Reusable Adhesive Gel

Temporarily stabilize objects on flat surfaces with this clear adhesive gel. It removes cleanly from most surfaces with a twist, and it won't dry out so it can be used again.

Container
Size, oz.	Type	Reaches Full Strength	Temp. Range, °F	Color	For Joining		Each
4	Jar	60 min.	-20° to 220°	Clear	Ceramic, Composites, Glass, Masonry, Metal, Rubber	0000000	000000

Metal-Reinforced Epoxy Structural Adhesives

These machinable epoxies are mixed with metal so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.

8267 is reinforced with steel, but won't rust.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
SteelStik	8267	2	Stick	5 min.	60 min.	900	Not Rated	Not Rated	-20° to 300°	Gray	Metal, Rubber, Composites, Masonry	000000	00000

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
HighHeat	8297	2	Stick	60 min.	8 hrs.	900	Not Rated	Putty (Not Rated)	-20° to 450°	Gray	Metal, Plastic, Rubber, Composites, Masonry	000000	00000

Quick-Set Epoxy Structural Adhesives

For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.

The size listed is the combined total of the two parts.

50132 works especially well on plastics and composites.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
PlasticWeld	50132	0.85	Syringe	5 min.	60 min.	2,000	Not Rated	1:1	Thick Liquid (9,000 cP)	-20° to 300°	Yellow	Metal, Plastic, Rubber, Composites, Masonry, Wood	000000	00000

Slow-Set Epoxy Structural Adhesives

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Max. Temperature, °F	For Joining		Each
Original	50165	0.85	Syringe	4 hrs.	24 hrs.	1,800	Not Rated	1:1	Paste (150,000 cP)	550°	Metal, Plastic, Rubber, Composites, Glass, Masonry	000000	00000

Urethane Structural Adhesives

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Plastic Bonder	50139	0.85	Syringe	15 min.	30 min.	1,000	Not Rated	1:1	Thick Liquid (50,000 cP)	-20° to 250°	Black	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood	000000	00000

Non-Hardening Caulk

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Butyl rubber has a sticky, gummy consistency.

3M Butyl Rubber Strip

Butyl Rubber Strip

									Black
Mfr. Model No.	Wd.	Thick.	Lg., ft.	Tensile Strength	Hardness	Temp. Range, °F	For Joining	Number of Pieces		Each
08578	5/16"	5/16"	1	Not Rated	Not Rated	-20° to 200°	Metal Plastic Asphalt Composites Glass Masonry Wood	60	0000000	000000
5354	1/4"	1/8"	50	Not Rated	Medium Hard (Durometer 60A)	-50° to 190°	Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass Wood Wood to Glass	1	0000000	00000
5354	1/4"	1/4"	25	Not Rated	Medium Hard (Durometer 60A)	-50° to 190°	Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass Wood Wood to Glass	1	00000000	00000
5354	3/8"	1/8"	50	Not Rated	Medium Hard (Durometer 60A)	-50° to 190°	Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass Wood Wood to Glass	1	0000000	00000
5354	3/4"	1/8"	50	Not Rated	Medium Hard (Durometer 60A)	-50° to 190°	Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass Wood Wood to Glass	1	0000000	000000

About Sealant Flexibility

About Structural Adhesives

Thread-Repair Surface Fillers

Aerosol Surface Fillers

Light-Activated Surface Filler Pens

Water-Resistant Surface Fillers

Coolant-Resistant Surface Fillers

Fuel-Resistant Surface Fillers

Putty-to-Rubber Moldable Glue

Optically Clear Reusable Adhesive Gel

Metal-Reinforced Epoxy Structural Adhesives

Epoxy Structural Adhesives

Quick-Set Epoxy Structural Adhesives

Slow-Set Epoxy Structural Adhesives

Urethane Structural Adhesives

Non-Hardening Caulk