Container Type Container Type |
|---|
 |  |  |
| Cartridge | Jar | Single- Use Packet |
For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
For Joining For Joining |
|---|
Formulation Formulation |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Mixing Required Mixing Required |
|---|
|
Begins to Harden Begins to Harden |
|---|
|
Viscosity Viscosity |
|---|
|
For Use Outdoors For Use Outdoors |
|---|
|
Specifications Met Specifications Met |
|---|
|
Maximum Application Temperature Maximum ApplicationTemperature |
|---|
|
Environment Environment |
|---|
|
Minimum Application Temperature Minimum ApplicationTemperature |
|---|
|
Paintable Paintable |
|---|
|
About Sealant Flexibility
More
About Structural Adhesives
More
Putty-to-Rubber Moldable Glue
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
| 0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | Black | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 000000 |
| 0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | Blue, Red, Yellow | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
| 0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | Gray | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
| 0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | White | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
Optically Clear Reusable Adhesive Gel
Temporarily stabilize objects on flat surfaces with this clear adhesive gel. It removes cleanly from most surfaces with a twist, and it won't dry out so it can be used again.
Container | |||||||
|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Reaches Full Strength | Temp. Range, °F | Color | For Joining | Each | |
| 4 | Jar | 60 min. | -20° to 220° | Clear | Ceramic, Composites, Glass, Masonry, Metal, Rubber | 0000000 | 000000 |
UV-Resistant Glass Sealants
These sealants don't degrade in sunlight. Also known as glazing compounds, use these sealants to install glass in framing. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, these sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | Specifications Met | For Joining | Choose a Color | Each | |
Silicone | ||||||||||||
| 10.1 | Cartridge | 30 min. | 24 hrs. | 475% | -25% to 25% | Soft (Durometer 20A) | -75° to 400° | FDA Compliant 21 CFR 175.105, FDA Compliant 21 CFR 177.2600, Fed. Spec. TT-S-001543A Type II Class A, Fed. Spec. TT-S-00230C Type II Class A, NSF/ANSI 51 | Metal Metal to Glass Plastic Plastic to Glass Rubber Rubber to Glass Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 | |