We will reply to your message within an hour.
More
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.
These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.
For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.
Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.
Stop leaks in metal tanks and equipment without draining the contents.
To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.
Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.
Seal leaks around small holes.
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.
Make castings and fill voids with these two-part pourable epoxies.
Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.
Also known as sloshing compounds, these surface fillers bond to rough, rusty surfaces in fuel tanks to repair leaks and prevent further corrosion.
Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.
Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.
These patching compounds are the most flexible and watertight we offer.
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.
Pull off a small piece of putty and stick lightweight objects to a surface.
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.
Even when used under water, these adhesives maintain their strength.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Make temporary waterproof seals that peel off when no longer needed.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
Press this adhesive-backed plastic tape into place for an immediate light-duty seal.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Made from silicone, these sealants are RTV (room-temperature vulcanizing). They combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Also known as neutral cure, this sealant won't discolor copper, brass, plastic, and concrete.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
Resistant to mold and mildew, these sealants are well suited to high-humidity environments.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
This sealant includes a material certificate with traceable lot number, test report, and product shelf life.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Also known as Torr Seal, this sealant forms a rigid bond that seals leaks on vacuum systems or components.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Make tough, flexible, oil-resistant seals.
Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
These sealants don't degrade in sunlight.
Seal glass windows in metal and wood fire-rated doors.
Make seals that support glass under heavy loads in equipment and buildings.
Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Seal metal-to-metal joints in ductwork.
Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications.
Wrap this tape tightly around pipe and other surfaces to seal cracks and joints without having to shut down your system.