For Use On For Use On |
---|
Maximum Temperature Maximum Temperature |
---|
|
Type Type |
---|
|
Consistency Consistency |
---|
|
For Joining For Joining |
---|
|
Manufacturer Manufacturer | Show |
---|
|
Manufacturer Manufacturer | Hide |
---|
|
|
Manufacturer Model Name Manufacturer Model Name |
---|
For Use Outdoors For Use Outdoors |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Clarity Clarity |
---|
|
Manufacturer Model Number Manufacturer Model Number |
---|
|
|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
---|
|
Environment Environment |
---|
|
More
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.
NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Specifications Met | Finishing Method | For Use On | Each | |
Devcon Plastic Steel® Liquid | ||||||||||||||
10210 | 1 lbs. | Jar, Can | 45 | 16 | Thick Liquid | 9:1 | 50 sq. in. @ 1/4" | -40° to 250° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
10220 | 4 lbs. | Jar, Can | 45 | 16 | Thick Liquid | 9:1 | 200 sq. in. @ 1/4" | -40° to 250° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
Devcon Plastic Steel® Epoxy | ||||||||||||||
52345 | 2 oz. | Tube | 60 | 24 | Thick Liquid | 1:1 | 6 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 0000 |
62345 | 0.8 oz. | Syringe | 60 | 24 | Thick Liquid | 1:1 | 6 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 0000 |
Devcon Plastic Steel® Putty | ||||||||||||||
10110 | 1 lbs. | Jar, Can | 45 | 16 | Putty | 9:1 | 40 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000 |
10120 | 4 lbs. | Jar, Can | 45 | 16 | Putty | 9:1 | 190 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
10130 | 25 lbs. | Pail, Can | 45 | 16 | Putty | 9:1 | 1200 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
Devcon Plastic Steel® 5 Minute Putty | ||||||||||||||
10240 | 1 lbs. | Jar, Can | 5 | 16 | Putty | 1.7:1 | 40 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000 |
Devcon Bronze Putty | ||||||||||||||
10260 | 1 lbs. | Jar, Can | 35 | 16 | Putty | 9:1 | 50 sq. in. @ 1/4" | -40° to 250° | Bronze | __ | Machine, Drill, Sand, Saw, Tap | Brass, Bronze | 00000000 | 000000 |
Devcon Stainless Steel Putty | ||||||||||||||
10270 | 1 lbs. | Jar, Can | 60 | 16 | Putty | 11:1 | 50 sq. in. @ 1/4" | -40° to 250° | Dark Gray | NSF/ANSI 61 | Machine, Drill, Sand, Saw, Tap | Stainless Steel | 00000000 | 000000 |
Devcon FasMetal™ Putty | ||||||||||||||
10780 | 0.75 lbs. | Jar, Can | 4 | 16 | Putty | 1:1 | 60 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 00000000 | 000000 |
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Titanium Putty | |||||||||||||||
10760 | 1 lbs. | Jar | 20 | 16 hrs. | Putty | 4.3:1 | 40 sq. in. @ 1/4" | 3/4" | Yes | -40° to 350° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 0000000 | 0000000 |
10770 | 2 lbs. | Jar | 20 | 16 hrs. | Putty | 4.3:1 | 90 sq. in. @ 1/4" | 3/4" | Yes | -40° to 350° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 00000000 | 000000 |
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Plastic Steel® Liquid can repair areas where brazing and welding is impractical.
Devcon Aluminum Liquid, Devcon Aluminum Putty, and Devcon FasMetal™ 10 HVAC Repair form a nonrusting finish.
Devcon Metal Patch & Fill repairs worn, rusted, and corroded surfaces with less preparation.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Plastic Steel® Liquid | |||||||||||||
10230 | 25 lbs. | Pail, Jug | 90 | 16 hrs. | Thick Liquid | 9:1 | 52 sq. in. @ 1/4" | 55° to 250° | Dark Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 0000000 |
Devcon Aluminum Liquid | |||||||||||||
10710 | 1 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 00000 |
10720 | 3 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 000000 |
Devcon Aluminum Putty | |||||||||||||
10610 | 1 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 00000 |
10620 | 3 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 000000 |
Devcon FasMetal™ 10 HVAC Repair | |||||||||||||
19770 | 6.5 oz. | Tube | 60 | 16 hrs. | Paste | 1:1 | 30 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 00000 |
Devcon Metal Patch & Fill | |||||||||||||
S-50 | 3 oz. | Tube | 20 | 6 hrs. | Paste | __ | 6 sq. in. @ 1/4" | 40° to 400° | Gray | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic, Glass | 00000000 | 0000 |
Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Flexane 80 Putty | |||||||||||||
15820 | 1 lbs. | Can | 20 min. | 7 days | Putty | 2.6:1 | 90 sq. in. @ 1/4" | -40° to 180° | Black | Sand | Vinyl Plastic, EPDM Rubber, SBR Rubber | 00000000 | 000000 |
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
WaterWeld and 11800, as well as one-time-use packets, can be applied to wet surfaces or under water.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
11800 | 16 | Pail | 45 min. | 24 hrs. | 2,600 | 1:1 | Putty | 40° to 250° | Gray | Submersible | Metal, Plastic, Composites | 0000000 | 000000 |