Material Material |
---|
|
System of Measurement System of Measurement |
---|
|
Inside Width Inside Width |
---|
Flexibility Flexibility |
---|
![]() | Semi-Rigid |
Performance Properties Performance Properties |
---|
|
Inside Corner Shape Inside Corner Shape |
---|
|
Inside Height Inside Height |
---|
For Use With For Use With |
---|
Hardness Rating Hardness Rating |
---|
|
Texture Texture |
---|
![]() | Smooth |
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Outside Corner Shape Outside Corner Shape |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Leg Edge Shape Leg Edge Shape |
---|
|
About Durometer Hardness Scales
More
About Plastic
More
Chemical-Resistant PVC 90° Angles

- Color: Gray
- Temperature Range: 32° to 140° F
- Tensile Strength: 7,000-7,800 psi (Good)
- Impact Strength: 0.7-3 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110-R120 (Hard)
- For Use Outdoors: No
Because these PVC Type 1 90° angles stand up to acids and alkalies, they’re often used to fabricate frames, tracks, and supports in chemical-processing applications. This material is easy to thermoform, plus it is an excellent electrical insulator.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 5 ft. Lg. | |||||
---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
0.08" Wall Thick. (-0.01" to 0.001") | |||||||
1/2" | 0.000" to 0.125" | 1/2" | 0.000" to 0.125" | 0.420" | 0.42" | 0000000 | 00000 |
3/4" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 0.670" | 1.42" | 0000000 | 00000 |
3/4" | 0.000" to 0.125" | 3/4" | 0.000" to 0.125" | 0.670" | 0.67" | 0000000 | 00000 |
0.08" Wall Thick. (-0.01" to 0.01") | |||||||
2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.920" | 1.92" | 0000000 | 00000 |
1/8" Wall Thick. (-0.063" to 0.063") | |||||||
1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 7/8" | 7/8" | 0000000 | 00000 |
1/8" Wall Thick. (-0.015" to 0.015") | |||||||
3/4" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 5/8" | 2 7/8" | 0000000 | 00000 |
1 1/4" | 0.000" to 0.040" | 1 1/4" | 0.000" to 0.040" | 1 1/8" | 1 1/8" | 0000000 | 00000 |
1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 3/8" | 1 3/8" | 0000000 | 00000 |
2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 7/8" | 1 7/8" | 0000000 | 00000 |
0.157" Wall Thick. (-0.019" to 0.019") | |||||||
3/4" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 0.593" | 1.343" | 0000000 | 00000 |
3/16" Wall Thick. (-0.063" to 0.063") | |||||||
1 1/4" | -0.125" to 0.125" | 1 1/4" | -0.125" to 0.125" | 1 1/16" | 1 1/16" | 0000000 | 00000 |
3/16" Wall Thick. (-0.023" to 0.023") | |||||||
1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 13/16" | 1 13/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.063" to 0.063") | |||||||
1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
1/4" Wall Thick. (-0.03" to 0.03") | |||||||
1 1/4" | 0.000" to 0.040" | 1 1/4" | 0.000" to 0.040" | 1" | 1" | 0000000 | 00000 |
0.275" Wall Thick. (-0.033" to 0.033") | |||||||
2 3/8" | -0.125" to 0.125" | 2 3/8" | -0.125" to 0.125" | 2.100" | 2.1" | 0000000 | 00000 |
3 1/2" | -0.125" to 0.125" | 3 1/2" | -0.125" to 0.125" | 3.225" | 3.225" | 0000000 | 000000 |
Impact- and Chemical-Resistant PVC 90° Angles

- Color: Black
- Temperature Range: See table
- Tensile Strength: See table
- Impact Strength: See table
- Hardness: Durometer 80D (Hard)
- For Use Outdoors: Yes
- Specifications Met: UL 94 V-0, NSF/ANSI 51
Made of PVC Type 2 plastic, these 90° angles resist impact and chemicals. More impact resistant than PVC Type 1, PVC Type 2 is commonly used where protection from bumps and strikes is needed. It’s also more impact resistant than silicone, although not as resistant to heat. Since it stands up to acids and alkalies, it’s often used to make parts for chemical processing applications.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Temperature Range, °F | Tensile Strength, psi | Tensile Strength Rating | Impact Strength, ft.-lbs./in. | Impact Strength Rating | 2 ft. Lg. | 4 ft. Lg. | 8 ft. Lg. | |
0.06" Wall Thickness (-0.01" to 0.01") | ||||||||||||||
1/2" | -0.01" to 0.01" | 1/2" | -0.01" to 0.01" | 0.44" | 0.44" | -20° to 160° | 6,000 | Good | 25 | Excellent | 00000000 | |||
1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.94" | 0.94" | -20° to 160° | 6,000 | Good | 25 | Excellent | 0000000 | |||
0.06" Wall Thickness (-0.008" to 0.008") | ||||||||||||||
3/4" | -0.015" to 0.015" | 3/4" | -0.015" to 0.015" | 0.69" | 0.69" | -20° to 160° | 6,000 | Good | 25 | Excellent | 0000000 | |||
0.065" Wall Thickness (-0.01" to 0.01") | ||||||||||||||
1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.435" | 1.435" | -20° to 160° | 6,000 | Good | 25 | Excellent | 0000000 | |||
1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.435" | 1.435" | -20° to 160° | 6,000 | Good | 25 | Excellent | 00000000 | |||
2" | -0.02" to 0.02" | 2" | -0.02" to 0.02" | 1.935" | 1.935" | -20° to 140° | 5,600 | Good | 20 | Excellent | 00000000 | |||
0.1" Wall Thickness (-0.015" to 0.015") | ||||||||||||||
3/4" | -0.015" to 0.015" | 3/4" | -0.015" to 0.015" | 0.65" | 0.65" | -20° to 160° | 6,000 | Good | 25 | Excellent | 0000000 | |||
1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.9" | 0.9" | -20° to 160° | 6,000 | Good | 25 | Excellent | 0000000 | |||
1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.9" | 0.9" | -20° to 160° | 6,000 | Good | 25 | Excellent | 00000000 | |||
2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.9" | 1.9" | -20° to 160° | 6,000 | Good | 25 | Excellent | 0000000 | |||
2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.9" | 1.9" | -20° to 160° | 6,000 | Good | 25 | Excellent | 00000000 | |||
3" | -0.03" to 0.03" | 3" | -0.03" to 0.03" | 2.885" | 2.885" | -20° to 140° | 5,600 | Good | 20 | Excellent | 00000000 | |||
0.1" Wall Thickness (-0.01" to 0.01") | ||||||||||||||
1 1/2" | -0.02" to 0.02" | 1 1/2" | -0.02" to 0.02" | 1.39" | 1.39" | -20° to 140° | 5,600 | Good | 20 | Excellent | 00000000 | |||
3/16" Wall Thickness (-0.02" to 0.02") | ||||||||||||||
1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.312" | 1.312" | -20° to 160° | 6,000 | Good | 25 | Excellent | 0000000 | |||
1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.312" | 1.312" | -20° to 160° | 6,000 | Good | 25 | Excellent | 00000000 | |||
2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.812" | 1.812" | -20° to 160° | 6,000 | Good | 25 | Excellent | 0000000 | |||
3/16" Wall Thickness (-0.0195" to 0.0195") | ||||||||||||||
3/4" | -0.02" to 0.02" | 3/4" | -0.02" to 0.02" | 0.542" | 0.542" | -20° to 140° | 5,600 | Good | 20 | Excellent | 00000000 | |||
1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.792" | 0.792" | -20° to 140° | 5,600 | Good | 20 | Excellent | 00000000 | |||
1/4" Wall Thickness (-0.02" to 0.02") | ||||||||||||||
1 1/2" | -0.02" to 0.02" | 1 1/2" | -0.02" to 0.02" | 1.23" | 1.23" | -20° to 140° | 5,600 | Good | 20 | Excellent | 00000000 | |||
2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.73" | 1.73" | -20° to 140° | 5,600 | Good | 20 | Excellent | 00000000 |
Clear Chemical-Resistant PVC 90° Angles

- Color: Clear
- Temperature Range: 32° to 140° F
- Tensile Strength: 7,260 psi (Good)
- Impact Strength: 0.48-2 ft.-lbs./in. (Poor)
- Hardness: Durometer 84D (Hard)
- For Use Outdoors: No
- Specifications Met: UL 94 V-0
When visibility is essential, use these clear 90° angles for tank parts and in chemical-processing applications. PVC resists acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 5 ft. Lg. | 10 ft. Lg. | ||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | Each | ||
1/8" Wall Thick. (-0.063" to 0.063") | |||||||||
1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 7/8" | 7/8" | 0000000 | 000000 | 00000000 | 000000 |
3/16" Wall Thick. (-0.063" to 0.063") | |||||||||
1 1/4" | -0.125" to 0.125" | 1 1/4" | -0.125" to 0.125" | 1 1/16" | 1 1/16" | 0000000 | 00000 | 00000000 | 00000 |
1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1 5/16" | 1 5/16" | 0000000 | 00000 | 00000000 | 00000 |
1/4" Wall Thick. (-0.063" to 0.063") | |||||||||
1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1 1/4" | 1 1/4" | 0000000 | 00000 | 00000000 | 00000 |
2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1 3/4" | 1 3/4" | 0000000 | 00000 | 00000000 | 00000 |
Raised-Bulb Corner Guards

With a raised bulb to absorb greater impact than standard corner guards, these guards protect walls, cabinets, and other surfaces. They resist abrasion and can be used outdoors.
For technical drawings and 3-D models, click on a part number.
Mounting Flange | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., ft. | Color | Thick. | Nonmarking | For Use Outdoors | Hardness Rating | Temperature Range, °F | Wd. | Thick. | Hardness Rating | Mounting Fasteners Included | Each | |
PVC Plastic—Screw In | |||||||||||||
3 1/2" | 4 | Black | 1 5/8" | Yes | Yes | Hard | 20° to 125° | 7/8" | 5/32" | Hard | No | 0000000 | 000000 |
3 1/2" | 4 | White | 1 5/8" | Yes | Yes | Hard | 20° to 125° | 7/8" | 5/32" | Hard | No | 0000000 | 00000 |
3 1/2" | 6 | Black | 1 5/8" | Yes | Yes | Hard | 20° to 125° | 7/8" | 5/32" | Hard | No | 0000000 | 00000 |
3 1/2" | 6 | White | 1 5/8" | Yes | Yes | Hard | 20° to 125° | 7/8" | 5/32" | Hard | No | 0000000 | 00000 |