Clear All
Material Material |
|---|
|
System of Measurement System of Measurement |
|---|
|
Outside Width Outside Width |
|---|
|
|
|
Flexibility Flexibility |
|---|
 | Semi-Rigid |
Inside Width Inside Width |
|---|
Inside Corner Shape Inside Corner Shape |
|---|
|
Performance Properties Performance Properties |
|---|
|
Inside Height Inside Height |
|---|
Leg Edge Shape Leg Edge Shape |
|---|
|
For Use With For Use With |
|---|
Outside Corner Shape Outside Corner Shape |
|---|
|
Thermal Stability Thermal Stability |
|---|
|
Texture Texture |
|---|
 | Smooth |
Hardness Rating Hardness Rating |
|---|
|
Density Density |
|---|
|
About Plastic
More
Chemical-Resistant PVC 90° Angles
- Color: Gray
- Temperature Range: 32° to 140° F
- Tensile Strength: 7,000-7,800 psi (Good)
- Impact Strength: 0.7-3 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110-R120 (Hard)
- For Use Outdoors: No
Because these PVC Type 1 90° angles stand up to acids and alkalies, they’re often used to fabricate frames, tracks, and supports in chemical-processing applications. This material is easy to thermoform, plus it is an excellent electrical insulator.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 5 ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
0.08" Wall Thick. (-0.01" to 0.001") | |||||||
| 1/2" | 0.000" to 0.125" | 1/2" | 0.000" to 0.125" | 0.420" | 0.42" | 0000000 | 00000 |
| 3/4" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 0.670" | 1.42" | 0000000 | 00000 |
| 3/4" | 0.000" to 0.125" | 3/4" | 0.000" to 0.125" | 0.670" | 0.67" | 0000000 | 00000 |
0.08" Wall Thick. (-0.01" to 0.01") | |||||||
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.920" | 1.92" | 0000000 | 00000 |
1/8" Wall Thick. (-0.063" to 0.063") | |||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 7/8" | 7/8" | 0000000 | 00000 |
1/8" Wall Thick. (-0.015" to 0.015") | |||||||
| 3/4" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 5/8" | 2 7/8" | 0000000 | 00000 |
| 1 1/4" | 0.000" to 0.040" | 1 1/4" | 0.000" to 0.040" | 1 1/8" | 1 1/8" | 0000000 | 00000 |
| 1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 3/8" | 1 3/8" | 0000000 | 00000 |
| 2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 7/8" | 1 7/8" | 0000000 | 00000 |
0.157" Wall Thick. (-0.019" to 0.019") | |||||||
| 3/4" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 0.593" | 1.343" | 0000000 | 00000 |
3/16" Wall Thick. (-0.063" to 0.063") | |||||||
| 1 1/4" | -0.125" to 0.125" | 1 1/4" | -0.125" to 0.125" | 1 1/16" | 1 1/16" | 0000000 | 00000 |
3/16" Wall Thick. (-0.023" to 0.023") | |||||||
| 1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
| 2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 13/16" | 1 13/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.063" to 0.063") | |||||||
| 1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
| 2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
1/4" Wall Thick. (-0.03" to 0.03") | |||||||
| 1 1/4" | 0.000" to 0.040" | 1 1/4" | 0.000" to 0.040" | 1" | 1" | 0000000 | 00000 |
0.275" Wall Thick. (-0.033" to 0.033") | |||||||
| 2 3/8" | -0.125" to 0.125" | 2 3/8" | -0.125" to 0.125" | 2.100" | 2.1" | 0000000 | 00000 |
| 3 1/2" | -0.125" to 0.125" | 3 1/2" | -0.125" to 0.125" | 3.225" | 3.225" | 0000000 | 000000 |
Chemical-Resistant PVC U-Channels
- Color: Gray
- Temperature Range: 5° to 140° F
- Tensile Strength: 7,000-7,800 psi (Good)
- Impact Strength: 0.7-3 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110-R120 (Hard)
- For Use Outdoors: No
Build frames, railings, tracks, and supports for use in chemical-processing applications. These U-channels are PVC Type 1, which stands up to acids and alkalies. They are easy to thermoform and provide excellent electrical insulation.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 5 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Wall Thick. | Wall Thick. Tolerance | Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
| 0.060" | -0.007" to 0.007" | 0.590" | -0.059" to 0.059" | 0.510" | -0.051" to 0.051" | 0.530" | 0.390" | 00000000 | 000000 |
| 0.066" | -0.008" to 0.008" | 0.787" | -0.079" to 0.079" | 0.944" | -0.094" to 0.094" | 0.721" | 0.812" | 00000000 | 00000 |
| 0.080" | -0.010" to 0.010" | 1.456" | -0.146" to 0.146" | 2.510" | -0.251" to 0.251" | 1.376" | 2.350" | 00000000 | 00000 |
| 0.080" | -0.010" to 0.010" | 1.650" | -0.165" to 0.165" | 1.140" | -0.114" to 0.114" | 1.570" | 0.980" | 00000000 | 00000 |
| 0.100" | -0.012" to 0.012" | 0.787" | -0.079" to 0.079" | 3.540" | -0.354" to 0.354" | 0.687" | 3.340" | 00000000 | 00000 |
| 0.137" | -0.016" to 0.016" | 0.787" | -0.079" to 0.079" | 1.870" | -0.187" to 0.187" | 0.650" | 1.596" | 00000000 | 00000 |
Impact- and Chemical-Resistant PVC 90° Angles
- Color: Black
- Temperature Range: -20° to 160° F
- Tensile Strength: 6,000 psi (Good)
- Impact Strength: 25 ft.-lbs./in. (Excellent)
- Hardness: Durometer 80D (Hard)
- For Use Outdoors: Yes
- Specifications Met: UL 94 V-0, NSF/ANSI 51
Made of PVC Type 2 plastic, these 90° angles resist impact and chemicals. More impact resistant than PVC Type 1, PVC Type 2 is commonly used where protection from bumps and strikes is needed. It’s also more impact resistant than silicone, although not as resistant to heat. Since it stands up to acids and alkalies, it’s often used to make parts for chemical processing applications.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | 2 ft. Lg. | 4 ft. Lg. | 8 ft. Lg. | |
0.06" Wall Thickness (-0.01" to 0.01") | |||||||||
| 1/2" | -0.01" to 0.01" | 1/2" | -0.01" to 0.01" | 0.44" | 0.44" | 00000000 | |||
| 1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.94" | 0.94" | 0000000 | |||
0.06" Wall Thickness (-0.008" to 0.008") | |||||||||
| 3/4" | -0.015" to 0.015" | 3/4" | -0.015" to 0.015" | 0.69" | 0.69" | 0000000 | |||
0.065" Wall Thickness (-0.01" to 0.01") | |||||||||
| 1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.435" | 1.435" | 0000000 | |||
0.1" Wall Thickness (-0.015" to 0.015") | |||||||||
| 3/4" | -0.015" to 0.015" | 3/4" | -0.015" to 0.015" | 0.65" | 0.65" | 0000000 | |||
| 1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.9" | 0.9" | 0000000 | |||
| 2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.9" | 1.9" | 0000000 | |||
0.188" Wall Thickness (-0.02" to 0.02") | |||||||||
| 1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.312" | 1.312" | 0000000 | |||
| 2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.812" | 1.812" | 0000000 | |||
Clear Chemical-Resistant PVC 90° Angles
- Color: Clear
- Temperature Range: 32° to 140° F
- Tensile Strength: 7,260 psi (Good)
- Impact Strength: 0.48-2 ft.-lbs./in. (Poor)
- Hardness: Durometer 84D (Hard)
- For Use Outdoors: No
- Specifications Met: UL 94 V-0
When visibility is essential, use these clear 90° angles for tank parts and in chemical-processing applications. PVC resists acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 5 ft. Lg. | 10 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | Each | ||
1/8" Wall Thick. (-0.063" to 0.063") | |||||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 7/8" | 7/8" | 0000000 | 000000 | 00000000 | 000000 |
3/16" Wall Thick. (-0.063" to 0.063") | |||||||||
| 1 1/4" | -0.125" to 0.125" | 1 1/4" | -0.125" to 0.125" | 1 1/16" | 1 1/16" | 0000000 | 00000 | 00000000 | 00000 |
| 1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1 5/16" | 1 5/16" | 0000000 | 00000 | 00000000 | 00000 |
1/4" Wall Thick. (-0.063" to 0.063") | |||||||||
| 1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1 1/4" | 1 1/4" | 0000000 | 00000 | 00000000 | 00000 |
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1 3/4" | 1 3/4" | 0000000 | 00000 | 00000000 | 00000 |