Material Material |
---|
|
System of Measurement System of Measurement |
---|
|
Outside Width Outside Width |
---|
|
|
|
Performance Properties Performance Properties |
---|
|
Flexibility Flexibility |
---|
![]() | Semi-Rigid |
Inside Corner Shape Inside Corner Shape |
---|
|
Leg Edge Shape Leg Edge Shape |
---|
|
Inside Width Inside Width |
---|
For Use With For Use With |
---|
Outside Corner Shape Outside Corner Shape |
---|
|
Inside Height Inside Height |
---|
Flexural Modulus Flexural Modulus |
---|
|
Impact Strength Impact Strength |
---|
|
Tensile Strength Rating Tensile Strength Rating |
---|
|
Density Density |
---|
|
Dielectric Strength Dielectric Strength |
---|
|
More
More
Because these PVC Type 1 90° angles stand up to acids and alkalies, they’re often used to fabricate frames, tracks, and supports in chemical-processing applications. This material is easy to thermoform, plus it is an excellent electrical insulator.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 5 ft. Lg. | |||||
---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
0.08" Wall Thick. (-0.01" to 0.001") | |||||||
1/2" | 0.000" to 0.125" | 1/2" | 0.000" to 0.125" | 0.420" | 0.42" | 0000000 | 00000 |
3/4" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 0.670" | 1.42" | 0000000 | 00000 |
3/4" | 0.000" to 0.125" | 3/4" | 0.000" to 0.125" | 0.670" | 0.67" | 0000000 | 0000 |
0.08" Wall Thick. (-0.01" to 0.01") | |||||||
2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.920" | 1.92" | 0000000 | 00000 |
1/8" Wall Thick. (-0.063" to 0.063") | |||||||
1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 7/8" | 7/8" | 0000000 | 00000 |
1/8" Wall Thick. (-0.015" to 0.015") | |||||||
3/4" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 5/8" | 2 7/8" | 0000000 | 00000 |
1 1/4" | 0.000" to 0.040" | 1 1/4" | 0.000" to 0.040" | 1 1/8" | 1 1/8" | 0000000 | 00000 |
1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 3/8" | 1 3/8" | 0000000 | 00000 |
2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 7/8" | 1 7/8" | 0000000 | 00000 |
0.157" Wall Thick. (-0.019" to 0.019") | |||||||
3/4" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 0.593" | 1.343" | 0000000 | 00000 |
3/16" Wall Thick. (-0.063" to 0.063") | |||||||
1 1/4" | -0.125" to 0.125" | 1 1/4" | -0.125" to 0.125" | 1 1/16" | 1 1/16" | 0000000 | 00000 |
3/16" Wall Thick. (-0.023" to 0.023") | |||||||
1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 13/16" | 1 13/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.063" to 0.063") | |||||||
1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
1/4" Wall Thick. (-0.03" to 0.03") | |||||||
1 1/4" | 0.000" to 0.040" | 1 1/4" | 0.000" to 0.040" | 1" | 1" | 0000000 | 00000 |
0.275" Wall Thick. (-0.033" to 0.033") | |||||||
2 3/8" | -0.125" to 0.125" | 2 3/8" | -0.125" to 0.125" | 2.100" | 2.1" | 0000000 | 00000 |
3 1/2" | -0.125" to 0.125" | 3 1/2" | -0.125" to 0.125" | 3.225" | 3.225" | 0000000 | 00000 |
Build frames, railings, tracks, and supports for use in chemical-processing applications. These U-channels are PVC Type 1, which stands up to acids and alkalies. They are easy to thermoform and provide excellent electrical insulation.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 5 ft. Lg. | |||||||
---|---|---|---|---|---|---|---|---|---|
Wall Thick. | Wall Thick. Tolerance | Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
0.060" | -0.007" to 0.007" | 0.590" | -0.059" to 0.059" | 0.510" | -0.051" to 0.051" | 0.530" | 0.390" | 00000000 | 00000 |
0.066" | -0.008" to 0.008" | 0.787" | -0.079" to 0.079" | 0.944" | -0.094" to 0.094" | 0.721" | 0.812" | 00000000 | 00000 |
0.080" | -0.010" to 0.010" | 1.456" | -0.146" to 0.146" | 2.510" | -0.251" to 0.251" | 1.376" | 2.350" | 00000000 | 00000 |
0.080" | -0.010" to 0.010" | 1.650" | -0.165" to 0.165" | 1.140" | -0.114" to 0.114" | 1.570" | 0.980" | 00000000 | 00000 |
0.100" | -0.012" to 0.012" | 0.787" | -0.079" to 0.079" | 3.540" | -0.354" to 0.354" | 0.687" | 3.340" | 00000000 | 00000 |
0.137" | -0.016" to 0.016" | 0.787" | -0.079" to 0.079" | 1.870" | -0.187" to 0.187" | 0.650" | 1.596" | 00000000 | 00000 |
Made of PVC Type 2 plastic, these 90° angles resist impact and chemicals. More impact resistant than PVC Type 1, PVC Type 2 is commonly used where protection from bumps and strikes is needed. It’s also more impact resistant than silicone, although not as resistant to heat. Since it stands up to acids and alkalies, it’s often used to make parts for chemical processing applications.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | ||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | 2 ft. Lg. | 4 ft. Lg. | 8 ft. Lg. | |
0.06" Wall Thickness (-0.01" to 0.01") | |||||||||
1/2" | -0.01" to 0.01" | 1/2" | -0.01" to 0.01" | 0.44" | 0.44" | 00000000 | |||
1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.94" | 0.94" | 0000000 | |||
0.06" Wall Thickness (-0.008" to 0.008") | |||||||||
3/4" | -0.015" to 0.015" | 3/4" | -0.015" to 0.015" | 0.69" | 0.69" | 0000000 | |||
0.065" Wall Thickness (-0.01" to 0.01") | |||||||||
1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.435" | 1.435" | 0000000 | |||
0.1" Wall Thickness (-0.015" to 0.015") | |||||||||
3/4" | -0.015" to 0.015" | 3/4" | -0.015" to 0.015" | 0.65" | 0.65" | 0000000 | |||
1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.9" | 0.9" | 0000000 | |||
2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.9" | 1.9" | 0000000 | |||
0.188" Wall Thickness (-0.02" to 0.02") | |||||||||
1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.312" | 1.312" | 0000000 | |||
2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.812" | 1.812" | 0000000 |
When visibility is essential, use these clear 90° angles for tank parts and in chemical-processing applications. PVC resists acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 5 ft. Lg. | |||||
---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
1/8" Wall Thick. (-0.063" to 0.063") | |||||||
1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 7/8" | 7/8" | 0000000 | 000000 |
3/16" Wall Thick. (-0.063" to 0.063") | |||||||
1 1/4" | -0.125" to 0.125" | 1 1/4" | -0.125" to 0.125" | 1 1/16" | 1 1/16" | 0000000 | 00000 |
1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.063" to 0.063") | |||||||
1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
Protect walls and other surfaces from impact. All are nonmarking.
Guards with a hard and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Screw-in guards mount with fasteners. Guards that do not have mounting holes require drilling holes.
PVC guards are chemical resistant and can be used outdoors.
Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg. | Thick. | Nonmarking | For Use Outdoors | Hardness Rating | Hardness | Temperature Range, °F | No. of Holes | Hole Dia. | Fasteners Included | Color | Each | ||
Screw In–For Flat Surfaces | ||||||||||||||
PVC Plastic | ||||||||||||||
8 | 2 1/2" | 17" | 2 1/2" | Yes | Yes | Hard | Durometer 86A | 20° to 120° | 3 | 0.3" | No | Black | 00000000 | 000000 |