How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Thick-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 80 pipe. With thicker, stronger walls than standard-wall fittings, they can handle heavy duty supply applications, such as water processing, wastewater treatment, and irrigation. Fittings are plastic for good corrosion resistance. They meet ASTM specifications and testing requirements for material quality.
Fittings for drinking water meet NSF/ANSI Standard 61.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
To prevent leaks in threaded connections, apply a sealant to the male threads. For plastic threads, apply a non-hardening, plastic-compatible sealant sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, NSF/ANSI 372, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 80 PVC Plastic
- Flanges: Use Schedule 80 PVC Plastic
Saddle-tap tees allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
Pipe Size | Socket Depth | For Pipe Size | For Pipe OD | For Hole Dia. | Material | Color | Max. Pressure | Each | |
1/2 | 5/16" | 2 | 2 3/8" | 3/4" | PVC Plastic | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
1/2 | 11/16" | 3 | 3 1/2" | 7/8" | PVC Plastic | Dark Gray | 185 psi @ 72° F | 0000000 | 00000 |
1/2 | 29/32" | 4 | 4 1/2" | 1 1/8" | PVC Plastic | Dark Gray | 160 psi @ 72° F | 0000000 | 00000 |
3/4 | 9/32" | 3 | 3 1/2" | 1 1/8" | PVC Plastic | Dark Gray | 345 psi @ 72° F | 0000000 | 00000 |
3/4 | 5/16" | 2 | 2 3/8" | 7/8" | PVC Plastic | Dark Gray | 345 psi @ 72° F | 0000000 | 00000 |
3/4 | 25/32" | 4 | 4 1/2" | 1 1/8" | PVC Plastic | Dark Gray | 345 psi @ 72° F | 0000000 | 00000 |
1 | 9/32" | 3 | 3 1/2" | 2 1/4" | PVC Plastic | Dark Gray | 315 psi @ 72° F | 0000000 | 00000 |
1 | 5/16" | 2 | 2 3/8" | 1 1/8" | PVC Plastic | Dark Gray | 315 psi @ 72° F | 0000000 | 00000 |
1 | 13/32" | 4 | 4 1/2" | 1 1/8" | PVC Plastic | Dark Gray | 315 psi @ 72° F | 0000000 | 00000 |
1 | 5/8" | 6 | 6 5/8" | 1 1/8" | PVC Plastic | Dark Gray | 315 psi @ 72° F | 0000000 | 000000 |
1 1/2 | 13/32" | 4 | 4 1/2" | 1 3/4" | PVC Plastic | Dark Gray | 235 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 23/32" | 3 | 3 1/2" | 2 1/4" | PVC Plastic | Dark Gray | 235 psi @ 72° F | 0000000 | 00000 |
2 | 3/8" | 3 | 3 1/2" | 1 1/8" | PVC Plastic | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
2 | 7/16" | 4 | 4 1/2" | 2 1/4" | PVC Plastic | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
2 | 11/16" | 6 | 6 5/8" | 2 1/4" | PVC Plastic | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
3 | 17/32" | 4 | 4 1/2" | 3" | PVC Plastic | Dark Gray | 185 psi @ 72° F | 0000000 | 000000 |
3 | 11/16" | 6 | 6 5/8" | 3" | PVC Plastic | Dark Gray | 185 psi @ 72° F | 0000000 | 000000 |

- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 80 Aluminum, Iron, PVC Plastic, Stainless Steel, Steel
- Flanges: Use Class 150 PVC Plastic
Fittings with stainless steel collar have a reinforcement on the female threads to prevent the threads from cracking.
Saddle-tap tees allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
Pipe Size | For Pipe Size | For Pipe OD | For Hole Dia. | Material | Collar Material | Color | Max. Pressure | Each | |
NPT Threads | |||||||||
---|---|---|---|---|---|---|---|---|---|
1/2 | 2 | 2 3/8" | 3/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
1/2 | 3 | 3 1/2" | 7/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
1/2 | 4 | 4 1/2" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
3/4 | 2 | 2 3/8" | 7/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
3/4 | 3 | 3 1/2" | 7/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
3/4 | 4 | 4 1/2" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
1 | 2 | 2 3/8" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
1 | 3 | 3 1/2" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
1 | 4 | 4 1/2" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
1 | 6 | 6 5/8" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 315 psi @ 72° F | 0000000 | 000000 |
1 1/2 | 3 | 3 1/2" | 2 1/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 4 | 4 1/2" | 1 3/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
2 | 3 | 3 1/2" | 2 1/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
2 | 4 | 4 1/2" | 2 1/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
2 | 6 | 6 5/8" | 2 1/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
3 | 4 | 4 1/2" | 3" | PVC Plastic | Stainless Steel | Dark Gray | 185 psi @ 72° F | 0000000 | 000000 |
3 | 6 | 6 5/8" | 3" | PVC Plastic | Stainless Steel | Dark Gray | 185 psi @ 72° F | 0000000 | 000000 |
Standard-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 40 plastic pipe–they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.
Fittings for drinking water meet NSF/ANSI Standard 61.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. Fittings that meet ASTM D1784, ASTM D1785, and ASTM D4066 adhere to specifications and testing requirements for material quality.
Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: See table
- Pipe Nipples and Pipe:
Pipe Size 1/2 to 1: Use PVC Plastic
Pipe Size 1 1/2 to 3: Use Aluminum, Iron, PVC Plastic, Stainless Steel, Steel - Flanges: Use Class 150 PVC Plastic
Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
Pipe Size | For Pipe Size | Socket Depth | For Pipe OD | For Hole Dia. | OD | ID | Wall Thick. | Material | Color | Max. Pressure | Specifications Met | Each | |
1/2 | 2 | 5/16" | 2 3/8" | 3/4" | 27/32" | 0.622" | 0.109" | PVC Plastic | White | 300 psi @ 72° F | ASTM D1784, NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 000000 |
1/2 | 3 | 11/16" | 3 1/2" | 7/8" | 27/32" | 0.622" | 0.109" | PVC Plastic | White | 300 psi @ 72° F | ASTM D1784, NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 00000 |
1/2 | 4 | 1" | 4 1/2" | 1 1/8" | 27/32" | 0.622" | 0.109" | PVC Plastic | White | 300 psi @ 72° F | ASTM D1784, NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 00000 |
3/4 | 2 | 5/16" | 2 3/8" | 7/8" | 1 1/16" | 0.824" | 0.113" | PVC Plastic | White | 240 psi @ 72° F | ASTM D1784, NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 00000 |
3/4 | 3 | 9/32" | 3 1/2" | 7/8" | 1 1/16" | 0.824" | 0.113" | PVC Plastic | White | 240 psi @ 72° F | ASTM D1784, NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 00000 |
3/4 | 4 | 13/16" | 4 1/2" | 1 1/8" | 1 1/16" | 0.824" | 0.113" | PVC Plastic | White | 240 psi @ 72° F | ASTM D1784, NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 000000 |
1 | 2 | 5/16" | 2 3/8" | 1 1/8" | 1 5/16" | 1.049" | 0.133" | PVC Plastic | White | 225 psi @ 72° F | ASTM D1784, NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 00000 |
1 | 3 | 9/32" | 3 1/2" | 1 1/8" | 1 5/16" | 1.049" | 0.133" | PVC Plastic | White | 225 psi @ 72° F | ASTM D1784, NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 00000 |
1 | 4 | 13/32" | 4 1/2" | 1 1/8" | 1 5/16" | 1.049" | 0.133" | PVC Plastic | White | 225 psi @ 72° F | ASTM D1784, NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 000000 |
1 | 6 | 5/8" | 6 5/8" | 1 1/8" | 1 5/16" | 1.049" | 0.133" | PVC Plastic | White | 225 psi @ 72° F | ASTM D1784, NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 000000 |
1 1/2 | 3 | 29/32" | 3 1/2" | 2 1/4" | 1 29/32" | 1.61" | 0.145" | PVC Plastic | White | 200 psi @ 72° F | ASTM D1784, NSF/ANSI 61 | 0000000 | 00000 |
1 1/2 | 4 | 1/2" | 4 1/2" | 1 3/4" | 1 29/32" | 1.61" | 0.145" | PVC Plastic | White | 200 psi @ 72° F | ASTM D1784, NSF/ANSI 61 | 0000000 | 000000 |
2 | 3 | 3/8" | 3 1/2" | 2 1/4" | 2 3/8" | 2.067" | 0.154" | PVC Plastic | White | 200 psi @ 72° F | ASTM D1784, NSF/ANSI 61 | 0000000 | 00000 |
2 | 4 | 7/16" | 4 1/2" | 2 1/4" | 2 3/8" | 2.067" | 0.154" | PVC Plastic | White | 200 psi @ 72° F | ASTM D1784, NSF/ANSI 61 | 0000000 | 000000 |
2 | 6 | 11/16" | 6 5/8" | 2 1/4" | 2 3/8" | 2.067" | 0.154" | PVC Plastic | White | 200 psi @ 72° F | ASTM D1784, NSF/ANSI 61 | 0000000 | 000000 |
3 | 4 | 1/2" | 4 1/2" | 3" | 3 1/2" | 3.068" | 0.216" | PVC Plastic | White | 200 psi @ 72° F | ASTM D1784, NSF/ANSI 61 | 0000000 | 000000 |

- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, NSF/ANSI 372, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 40 Aluminum, Iron, PVC Plastic, Stainless Steel, Steel
- Flanges: Use Class 150 PVC Plastic
Fittings with stainless steel collar have a reinforcement on the female threads to prevent the threads from cracking.
Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
Pipe Size | For Pipe Size | Socket Depth | For Pipe OD | For Hole Dia. | OD | ID | Wall Thick. | Material | Collar Material | Color | Max. Pressure | Each | |
NPT Threads | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/2 | 2 | 5/16" | 2 3/8" | 3/4" | 27/32" | 0.622" | 0.109" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 000000 |
1/2 | 3 | 13/16" | 3 1/2" | 7/8" | 27/32" | 0.622" | 0.109" | PVC Plastic | Stainless Steel | White | 300 psi @ 72° F | 0000000 | 000000 |
1/2 | 4 | 1 1/16" | 4 1/2" | 1 1/8" | 27/32" | 0.622" | 0.109" | PVC Plastic | Stainless Steel | White | 300 psi @ 72° F | 0000000 | 000000 |
3/4 | 2 | 5/16" | 2 3/8" | 7/8" | 1 3/64" | 0.824" | 0.113" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 00000 |
3/4 | 3 | 19/32" | 3 1/2" | 7/8" | 1 1/16" | 0.824" | 0.113" | PVC Plastic | Stainless Steel | White | 240 psi @ 72° F | 0000000 | 000000 |
3/4 | 4 | 27/32" | 4 1/2" | 1 1/8" | 1 3/64" | 0.824" | 0.113" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 000000 |
1 | 2 | 5/16" | 2 3/8" | 1 1/8" | 1 5/16" | 1.049" | 0.133" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 00000 |
1 | 3 | 17/32" | 3 1/2" | 1 1/8" | 1 5/16" | 1.049" | 0.133" | PVC Plastic | Stainless Steel | White | 225 psi @ 72° F | 0000000 | 000000 |
1 | 4 | 7/16" | 4 1/2" | 1 1/8" | 1 5/16" | 1.049" | 0.133" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 000000 |
1 | 6 | 7/8" | 1 5/8" | 1 1/8" | 1 5/16" | 1.049" | 0.133" | PVC Plastic | Stainless Steel | White | 225 psi @ 72° F | 0000000 | 000000 |
1 1/2 | 3 | 1 3/16" | 3 1/2" | 2 1/4" | 1 29/32" | 1.61" | 0.145" | PVC Plastic | Stainless Steel | White | 165 psi @ 72° F | 0000000 | 000000 |
1 1/2 | 4 | 7/8" | 4 1/2" | 1 3/4" | 1 29/32" | 1.61" | 0.145" | PVC Plastic | Stainless Steel | White | 165 psi @ 72° F | 0000000 | 000000 |
2 | 3 | 15/16" | 3 1/2" | 2 1/4" | 2 3/8" | 2.067" | 0.154" | PVC Plastic | Stainless Steel | White | 140 psi @ 72° F | 0000000 | 00000 |
2 | 4 | 1" | 4 1/2" | 2" | 2 3/8" | 2.067" | 0.154" | PVC Plastic | Stainless Steel | White | 140 psi @ 72° F | 0000000 | 000000 |
2 | 6 | 11/16" | 6 5/8" | 2 1/4" | 2 3/8" | 2.067" | 0.154" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 000000 |
3 | 4 | 1" | 4 1/2" | 3" | 3 1/2" | 3.068" | 0.216" | PVC Plastic | Stainless Steel | White | 130 psi @ 72° F | 0000000 | 000000 |
CPVC Pipe Fittings for Hot Water

Made of CPVC, these fittings can handle high temperatures. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing and waste water treatment. They also have good corrosion resistance. These fittings are comparable to Corzan. Some meet ASTM D1784 specifications and testing requirements for material quality.
Fittings for drinking water meet NSF/ANSI Standard 61.
Schedule 80 fittings have thick, strong walls for heavy duty, industrial applications.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

- For Use With: Acetic Acid (10%), Calcium Chloride, Deionized Water, Drinking Water, Hydrochloric Acid (25%), Nitric Acid (10%), Phosphoric Acid (85%), Salt Water, Sodium Hydroxide (50%), Sulfuric Acid (75%), Water
- Maximum Temperature: 200° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 80 CPVC Plastic
- Flanges: Use Class 150 CPVC Plastic
To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
Saddle-tap tees allow you to create additional outlets and connections in metal or plastic pipe. They clamp on for an easy way to install and maintain systems.
Pipe Size | For Pipe Size | For Pipe OD | For Hole Dia. | Material | Schedule | Color | Max. Pressure | Washer Material | Each | |
NPT Threads | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1/2 | 2 | 2 3/8" | 3/4" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 000000 |
1/2 | 3 | 3 1/2" | 7/8" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 00000 |
1/2 | 4 | 4 1/2" | 1 1/8" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 000000 |
3/4 | 2 | 2 3/8" | 7/8" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 00000 |
3/4 | 3 | 3 1/2" | 7/8" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 00000 |
3/4 | 4 | 4 1/2" | 1 1/8" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 000000 |
1 | 2 | 2 3/8" | 1 1/8" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 00000 |
1 | 3 | 3 1/2" | 1 1/8" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 00000 |
1 | 4 | 4 1/2" | 1 1/8" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 000000 |
1 1/2 | 3 | 3 1/2" | 2 1/4" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 00000 |
1 1/2 | 4 | 4 1/2" | 1 3/4" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 000000 |
2 | 4 | 4 1/2" | 2 1/4" | CPVC Plastic | 80 | Light Gray | 230 psi @ 72° F | Zinc | 00000000 | 000000 |
2 | 6 | 6 5/8" | 2 1/4" | CPVC Plastic | 80 | Light Gray | 200 psi @ 72° F | Zinc | 00000000 | 000000 |
Aboveground Standard-Wall PVC Pipe Fittings for Drain, Waste, and Vent

- For Use With: Water
- Max. Temperature: 140° F
- Specifications Met: ASTM D1784, ASTM D2665
- Pipe Nipples and Pipe: Use Schedule 40 PVC Plastic
- Flanges: Use Schedule 40 PVC Plastic
These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications. Fittings are PVC, which has good corrosion resistance. They meet ASTM D1784 and ASTM D2665 specifications and testing requirements for material quality.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

Fittings with a compression end are also known as slip-joint fittings. Insert the tube into the compression end and turn the nut until hand tight. Since you don't have to wait for cement to dry, they are quicker to install than socket-connect fittings.

Fittings with a compression end are also known as slip-joint fittings. Insert the tube into the compression end and turn the nut until hand tight. Since you don't have to wait for cement to dry, they are quicker to install than socket-connect fittings.
270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
Cast Iron-to-PVC Pipe Adapters for Drain, Waste, and Vent
These adapters connect PVC waste pipe to cast iron pipe without adding bulk. Instead of securing pipes together from the outside like clamp-on couplings, these flexible adapters fit into cast iron pipe to create a tight compression seal. Adapters should fit tightly—tap with a mallet to install. Made of PVC, these fittings won't corrode when exposed to water.

- For Use With: Water
- Temperature Range: -30° to 140° F
- Specifications Met: ASTM D5926

- For Use With: Water
- Temperature Range: -30° to 140° F
- Specifications Met: ASTM D5926
Female | ||||||||
---|---|---|---|---|---|---|---|---|
Male Pipe Size | Pipe Size | For Pipe OD | Lg. | Material | Color | Max. Pressure | Each | |
3 | 2 | 3 1/2" | 1 41/64" | PVC Plastic | Black | 4 psi @ 72° F | 0000000 | 000000 |
Medium-Pressure Clamp-On Connectors
Create quick, liquid-tight connections in medium-pressure applications with these connectors. They join rigid pipe of the same or different materials. Connectors have a gasket that permits moderate movement and misalignment of pipe ends.
Compression connectors slide onto pipe and hand tighten with the end nuts. You may need to tighten over time. These connectors have a Buna-N rubber gasket that resists oil, as well as mild chemicals and water. Replace the gasket when it’s worn out, or swap it out for a gasket with different properties. PVC connectors are lighter in weight and more economical than metal connectors.

- For Use With: Water
- Temperature Range: 32° to 73° F
- For Pipe Material: Steel, PVC Plastic
For Pipe OD | For Pipe Size | Lg. | Pipe Connection Type | Max. Pressure | Gasket Material | Each | |
0.84" | 1/2 | 5" | Compression | 125 psi @ 72° F | Buna-N Rubber | 00000000 | 00000 |
1.05" | 3/4 | 5.2" | Compression | 125 psi @ 72° F | Buna-N Rubber | 00000000 | 0000 |
1.315" | 1 | 6" | Compression | 125 psi @ 72° F | Buna-N Rubber | 00000000 | 0000 |
1.66" | 1 1/4 | 6.2" | Compression | 125 psi @ 72° F | Buna-N Rubber | 00000000 | 0000 |
1.9" | 1 1/2 | 6.7" | Compression | 125 psi @ 72° F | Buna-N Rubber | 00000000 | 00000 |
2 3/8" | 2 | 7 1/2" | Compression | 125 psi @ 72° F | Buna-N Rubber | 00000000 | 00000 |
3 1/2" | 3 | 10.6" | Compression | 125 psi @ 72° F | Buna-N Rubber | 00000000 | 00000 |
4 1/2" | 4 | 13.1" | Compression | 125 psi @ 72° F | Buna-N Rubber | 00000000 | 00000 |