McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    86 Products

    Chemical-Resistant Heat-Shrink Tubing

    Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.
    PVC (Short)
    Image of Product. Front orientation. Heat-Shrink Tubing. Chemical-Resistant Heat-Shrink Tubing.
    PVC tubing is more chemical resistant than neoprene and Viton® fluoroelastomer. It also resists UV, so it won’t fade or discolor when exposed to sunlight. Store tubing at 70° F or lower to avoid premature shrinkage.
    SAE AMS-I-23053/2 Class 2—SAE AMS-I-23053/2 Class 2 tubing meets requirements for material quality and color.
    UL 2556 VW-1—Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
    Dielectric Strength—Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
    ID
    1/2 ft. Long
    1 ft. Long
    Before
    Shrinking
    Min. After
    Shrinking
    Min. Wall Thk.
    After Shrinking
    Dielectric Strength,
    V/mil
    Shrink
    Temp., ° F
    Temp. Range,
    ° F
    Specs. Met
    Flammability
    Rating
    Choose a Color
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    2:1 Shrink Ratio
    0.05"0.02"0.02"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K58300000———0
    0.06"0.03"0.02"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K5110000———0
    0.13"0.06"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K5120000———0
    0.19"0.09"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K5130000———0
    0.25"0.13"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K5140000———0
    0.38"0.19"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K5150000———0
    0.5"0.25"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K5160000———0
    0.63"0.31"0.03"Not Rated2150 to 220Black, Clear, Orange, Red, White———059920T1100000
    0.63"0.31"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K5170000———0
    0.75"0.38"0.03"Not Rated2150 to 220Black, Clear, Orange, Red, White———059920T120000
    0.75"0.38"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K5180000———0
    1"0.5"0.04"Not Rated2150 to 220Black, Clear, Orange, Red, White———059920T130000
    1"0.5"0.04"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K5190000———0
    1.5"0.75"0.04"Not Rated2150 to 220Black, Clear, Orange, Red, White———059920T1400000
    1.5"0.75"0.04"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K52100000———0
    2"1"0.05"Not Rated2150 to 220Black, Clear, Orange, Red, White———039920T1500000
    2"1"0.05"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K52200000———0
    3"1.5"0.07"Not Rated2150 to 220Black, Clear, Orange, Red, White———019920T160000
    3"1.5"0.07"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow57132K52300000———0
    4"2"0.07"Not Rated2150 to 220Black, Clear, Orange, Red, White———019920T1700000
    4"2"0.07"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow37132K52400000———0
     
    PVC (Long)
    Image of Product. Front orientation. Heat-Shrink Tubing. Chemical-Resistant Heat-Shrink Tubing.
    PVC tubing is more chemical resistant than neoprene and Viton® fluoroelastomer. It also resists UV, so it won’t fade or discolor when exposed to sunlight. Store tubing at 70° F or lower to avoid premature shrinkage.
    SAE AMS-I-23053/2 Class 2—SAE AMS-I-23053/2 Class 2 tubing meets requirements for material quality and color.
    UL 2556 VW-1—Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
    Dielectric Strength—Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
    ID
    Before
    Shrinking
    Min. After
    Shrinking
    Min. Wall Thk.
    After Shrinking
    Dielectric Strength,
    V/mil
    Shrink
    Temp., ° F
    Temp. Range,
    ° F
    Specs. Met
    Flammability
    Rating
    Choose a Color
    5 ft.
    Long
    10 ft.
    Long
    25 ft.
    Long
    50 ft.
    Long
    100 ft.
    Long
    125 ft.
    Long
    250 ft.
    Long
    2:1 Shrink Ratio
    0.05"0.02"0.02"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K947000000000000000000
    0.06"0.03"0.02"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K948000000000000000000000
    0.13"0.06"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K949000000000000000
    0.19"0.09"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K951000000000000000
    0.25"0.13"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K952000000000000000
    0.38"0.19"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K9530000000000000000
    0.5"0.25"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K9540000000000000000
    0.63"0.31"0.03"Not Rated2150 to 220Black, Clear, Orange, Red, White9920T5110000000000
    0.63"0.31"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K955000000000000000
    0.75"0.38"0.03"Not Rated2150 to 220Black, Clear, Orange, Red, White9920T51200000000000
    0.75"0.38"0.03"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K9570000000000000000
    1"0.5"0.04"Not Rated2150 to 220Black, Clear, Orange, Red, White9920T51300000000000
    1"0.5"0.04"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K9590000000000000000
    1.5"0.75"0.04"Not Rated2150 to 220Black, Clear, Orange, Red, White9920T51400000000000
    1.5"0.75"0.04"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K96200000000000000000
    2"1"0.05"Not Rated2150 to 220Black, Clear, Orange, Red, White9920T515000000000000
    2"1"0.05"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K9640000000000000000
    3"1.5"0.07"Not Rated2150 to 220Black, Clear, Orange, Red, White9920T516000000000000
    3"1.5"0.07"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K96600000000000000000
    4"2"0.07"Not Rated2150 to 220Black, Clear, Orange, Red, White9920T51700000000000
    4"2"0.07"1,0002150 to 220SAE AMS-I-23053/2 Class 2UL 2556 VW-1
    Black, Blue, Clear, Green, Red, White, Yellow7132K96800000000000000000
    5"2.5"0.08"Not Rated2150 to 220Black, Clear, Orange, White9920T51800000000000
     

    Harsh-Environment Heat-Shrink Tubing Assortments

    Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
    Canisters
    Image of Product. Front orientation. Heat-Shrink Tubing. Harsh-Environment Heat-Shrink Tubing Assortments, Canisters.
    PVC—PVC tubing has excellent resistance to chemicals, oil, and acids.
    Includes
    Material
    No. of
    Pieces
    Lg.,
    ft.
    Shrink
    Ratio
    Shrink
    Temp., ° F
    Performance
    Color
    Each
    0.09"-0.38" ID Before Shrinking of PVC (5 sizes)PVC
    1751/22:1215Chemical Resistant, UV ResistantBlack8061K3000000
    Racks
    Image of Product. Front orientation. Heat-Shrink Tubing. Harsh-Environment Heat-Shrink Tubing Assortments, Racks.
    PVC—PVC tubing has excellent resistance to chemicals, oil, and acids.
    Mounting
    Includes
    Material
    No. of
    Spools
    Type
    No. of
    Holes
    Hole
    Dia.
    Fasteners
    Included
    Lg., ft.
    Shrink
    Ratio
    Shrink
    Temp., ° F
    Performance
    Color
    Each
    0.06" ID Before Shrinking of PVC (100 feet)
    0.13", 0.19", 0.25", 0.38" ID Before Shrinking of PVC (25 feet each)
    PVC
    5Screw On21/4"No25, 1002:1215Chemical Resistant, UV ResistantBlack8061K70000000
    Plastic Bags
    Image of Product. Front orientation. Heat-Shrink Tubing. Harsh-Environment Heat-Shrink Tubing Assortments, Plastic Bags.
    PVC—PVC tubing has excellent resistance to chemicals, oil, and acids.
    Includes
    Material
    No. of
    Pieces
    Lg.,
    ft.
    Shrink
    Ratio
    Shrink
    Temp., ° F
    Performance
    Color
    Each
    0.06"-0.75" ID Before Shrinking of PVC (6 sizes)PVC
    1001/22:1215Chemical Resistant, UV ResistantBlack8061K5000000
    Compartmented Plastic Boxes
    Image of Product. Front orientation. Heat-Shrink Tubing. Harsh-Environment Heat-Shrink Tubing Assortments, Compartmented Plastic Boxes.
    FEP—FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
    Polyolefin—Polyolefin is for general purpose use.
    PTFE—PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.
    PVC—PVC tubing has excellent resistance to chemicals, oil, and acids.
    PVDF—PVDF resists abrasion, cuts, and tears.
    Adhesive Mount—Adhesive-mount polyolefin creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
    Includes
    Material
    Mount
    Type
    No. of
    Pieces
    Lg.
    Shrink Ratio
    Shrink Temp.,
    ° F
    Performance
    Color
    Each
    0.05"-0.75" ID Before Shrinking of Polyolefin (41 pieces, 9 sizes)
    0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes)
    0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes)
    0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 3 each)
    0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes)
    Polyolefin, PVC, PVDF821/2 ft.2:1, 2.5:1195 to 340Chemical Resistant, Abrasion ResistantBlack, Blue, Brown, Clear, Gray, Green, Red, White, Yellow8061K1130000000
    0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes)
    0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes)
    0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes)
    0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes)
    0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes)
    0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes)
    0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each)
    0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes)
    FEP, Polyolefin, PTFE, PVC, PVDFAdhesive1811", 1/2 ft.1.2:1, 1.5:1, 2:1, 2.5:1, 3:1195 to 485Chemical Resistant, Abrasion Resistant, Moisture ResistantBlack, Blue, Brown, Clear, Gray, Green, Red, White, Yellow8061K114000000
    0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes)
    0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6 sizes)
    0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes)
    0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes)
    0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes)
    0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each)
    FEP, Polyolefin, PVC, PVDFAdhesive1121/2 ft.1.2:1, 2:1, 2.5:1, 3:1195 to 395Chemical Resistant, Abrasion Resistant, Moisture ResistantBlack, Blue, Brown, Clear, Gray, Green, Red, White, Yellow8061K115000000
    0.13"-0.5" ID Before Shrinking of Polyolefin with Adhesive Lining (5 sizes)
    0.13"-0.5" ID Before Shrinking of PVC (5 sizes)
    0.13"-0.5" ID Before Shrinking of PVDF (5 sizes)
    Polyolefin, PVC, PVDFAdhesive1501/2 ft.2:1195 to 350Chemical Resistant, Abrasion Resistant, Moisture ResistantBlack, Clear8061K4000000

    Tight-Seal Chemical-Resistant Heat-Shrink Tubing

    Image of ProductInUse. Front orientation. Heat-Shrink Tubing. Tight-Seal Chemical-Resistant Heat-Shrink Tubing.
    Image of Product. Front orientation. Heat-Shrink Tubing. Tight-Seal Chemical-Resistant Heat-Shrink Tubing.
    Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. Made of PVC, it has excellent resistance to chemicals, oil, and acids. It also resists UV, so it won't fade or discolor when exposed to sunlight. All are flame rated VW-1, so this tubing meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.
    Dielectric Strength—Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
    ID
    25 ft. Long
    100 ft. Long
    Before
    Shrinking
    Min. After
    Shrinking
    Min. Wall Thk.
    After Shrinking
    Dielectric Strength,
    V/mil
    Shrink
    Temp., ° F
    Temp. Range,
    ° F
    Flammability
    Rating
    Certification
    Color
    Each
    Each
    PVC
     
    2:1 Shrink Ratio
    0.48"0.26"0.004"2,0002850 to 210UL 2556 VW-1
    UL Recognized Component
    White9902T12000009902T51000000
    0.6"0.33"0.004"2,0002850 to 210UL 2556 VW-1
    UL Recognized Component
    White9902T1300009902T5200000
    0.85"0.47"0.004"2,0002850 to 210UL 2556 VW-1
    UL Recognized Component
    White9902T1400009902T5300000
    0.91"0.5"0.004"2,0002850 to 210UL 2556 VW-1
    UL Recognized Component
    White9902T1500009902T5400000
    1.04"0.57"0.004"2,0002850 to 210UL 2556 VW-1
    UL Recognized Component
    White9902T1600009902T5500000
    1.13"0.62"0.004"2,0002850 to 210UL 2556 VW-1
    UL Recognized Component
    White9902T1700009902T5600000
    1.2"0.66"0.004"2,0002850 to 210UL 2556 VW-1
    UL Recognized Component
    White9902T1800009902T5700000
    1.45"0.8"0.004"2,0002850 to 210UL 2556 VW-1
    UL Recognized Component
    White9902T19000009902T5800000
    1.6"0.88"0.004"2,0002850 to 210UL 2556 VW-1
    UL Recognized Component
    White9902T29000009902T5900000
     

    Chemical-Resistant Moisture-Seal Heat-Shrink Tubing

    Image of Product. Front orientation. Heat-Shrink Tubing. Chemical-Resistant Moisture-Seal Heat-Shrink Tubing.
    Made of PVC, this tubing resists chemicals, oil, and solvents. An adhesive lining melts when the tubing is heated and bonds to the underlying surface, creating a water-resistant seal. It resists UV, so it won’t fade or discolor when exposed to sunlight.
    Dielectric Strength—Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
    ID
    1/2 ft. Long
    25 ft. Long
    100 ft. Long
    Before
    Shrinking
    Min. After
    Shrinking
    Min. Wall Thk.
    After Shrinking
    Dielectric Strength,
    V/mil
    Shrink
    Temp., ° F
    Temp. Range,
    ° F
    Color
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    PVC
     
    2:1 Shrink Ratio
    0.19"0.09"0.04"1,0002150 to 220Black58195K210000018195K3100000018195K41000000
    0.25"0.13"0.04"1,0002150 to 220Black58195K22000018195K320000018195K42000000
    0.38"0.19"0.04"1,0002150 to 220Black58195K23000018195K330000018195K43000000
    0.5"0.25"0.04"1,0002150 to 220Black58195K24000018195K340000018195K44000000
    0.75"0.38"0.04"1,0002150 to 220Black58195K25000018195K350000018195K45000000
    1"0.5"0.05"1,0002150 to 220Black58195K260000018195K360000018195K46000000
     
    back to top