For Use With For Use With |
|---|
|
Seal Material Seal Material |
|---|
|
About Pressure-Relief Valves
More
Adjustable Pressure-Relief Valves for Chemicals
- For Use With: Aluminum Chloride, Boric Acid
- Temperature Range: 40° to 140° F
Often used with catalysts, pH buffers, and electroplating solutions, these valves have a PVC body and an EPDM seal for excellent chemical resistance. They begin opening at the set pressure and fully open at about 10% over the set pressure. Valves begin closing as pressure drops and fully close when the system pressure is restored below the set pressure. Adjust the set pressure within the range. Valves have a port for attaching a pressure gauge.
For technical drawings and 3-D models, click on a part number.
Inlet | Relief Port | Set Pressure | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Location | Pipe Size | Location | Range, psi | Adjustment Method | Overall Ht. | Gauge Port Pipe Size | Each | |
NPT Female Inlet and Relief Port | |||||||||
Dark Gray PVC Body—EPDM Seal | |||||||||
| 1/2 | Bottom | 1/2 | Side | 5 to 75 | External Adjustment Screw | 6 3/4" | 1/4 | 0000000 | 0000000 |
| 3/4 | Bottom | 3/4 | Side | 5 to 75 | External Adjustment Screw | 6 7/8" | 1/4 | 0000000 | 000000 |
| 1 | Bottom | 1 | Side | 5 to 75 | External Adjustment Screw | 8 3/4" | 1/4 | 0000000 | 000000 |
| 1 1/2 | Bottom | 1 1/2 | Side | 5 to 75 | External Adjustment Screw | 13 1/4" | 1/4 | 0000000 | 000000 |
| 2 | Bottom | 2 | Side | 5 to 75 | External Adjustment Screw | 15 1/2" | 1/4 | 0000000 | 000000 |
Adjustable Inline Pressure-Relief Valves for Chemicals
- For Use With: Potassium Sulfate, Sodium Hypochlorite
- Temperature Range: 0° to 140° F
With a three-port design, these valves allow inline flow from the inlet to the outlet during normal conditions and divert flow through the relief port in overpressure conditions. Often used with feed pumps for fertilizers and bleach, they have a PVC body and a PTFE seal for excellent chemical resistance. The relief port begins opening at the set pressure and fully opens at about 10% over the set pressure. It begins closing as pressure drops and fully closes when the system pressure is restored below the set pressure, resuming inline flow from the inlet to the outlet. Adjust the set pressure within the range.
For technical drawings and 3-D models, click on a part number.
Inlet | Outlet | Relief Port | Set Pressure | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Location | Pipe Size | Location | Pipe Size | Location | Range, psi | Adjustment Method | Overall Ht. | Each | |
NPT Female Inlet, Outlet, and Relief Port | ||||||||||
Dark Gray PVC Body—PTFE Seal | ||||||||||
| 1/4 | Side | 1/4 | Side | 1/4 | Bottom | 10 to 150 | External Adjustment Screw | 3 17/32" | 00000000 | 0000000 |
| 1/2 | Side | 1/2 | Side | 1/2 | Bottom | 10 to 250 | External Adjustment Screw | 5 9/16" | 00000000 | 000000 |
| 1 | Side | 1 | Side | 1 | Bottom | 10 to 250 | External Adjustment Screw | 5 7/8" | 00000000 | 000000 |