Material Material | Show |
|---|
|
Material Material | Hide |
|---|
|
|
System of Measurement System of Measurement |
|---|
|
Threading Threading |
|---|
 | Fully Threaded |
 | Partially Threaded |
Anchor Type Anchor Type |
|---|
 | Plug |
Drive Style Drive Style |
|---|
 |  |  |
| External Hex | Phillips | Slotted |
Thread Direction Thread Direction |
|---|
 | |
Maximum Temperature Maximum Temperature |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Thread Type Thread Type |
|---|
Thread Spacing Thread Spacing |
|---|
Tensile Strength Tensile Strength |
|---|
|
Hardness Hardness |
|---|
|
Thread Fit Thread Fit |
|---|
|
About Threaded Studs and Rods
More
About Hex Head Screws and Bolts
More
Plastic Hex Head Screws
Plastic screws are chemical and oil resistant, nonconductive, and lightweight. Not recommended for high-strength fastening. Length is measured from under the head.
PVC screws resist oil, grease, and alkalies better than nylon screws. Unlike nylon screws, they won’t absorb moisture.
Match the thread spacing of mating components. Coarse threads are the industry standard; choose these screws if you don’t know the pitch or threads per inch.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Threading | Min. Thread Lg. | Thread Spacing | Wd. | Ht. | Color | Max. Temperature, °F | Tensile Strength | Pkg. Qty. | Pkg . | |
PVC Plastic | |||||||||||
1/4"-20 | |||||||||||
| 1/2" | Fully Threaded | __ | Coarse | 7/16" | 15/64" | Gray | 140° | Not Rated | 5 | 000000000 | 00000 |
| 3/4" | Fully Threaded | __ | Coarse | 7/16" | 15/64" | Gray | 140° | Not Rated | 5 | 000000000 | 00000 |
| 1" | Fully Threaded | __ | Coarse | 7/16" | 15/64" | Gray | 140° | Not Rated | 5 | 000000000 | 00000 |
| 1 1/2" | Partially Threaded | 3/4" | Coarse | 7/16" | 15/64" | Gray | 140° | Not Rated | 5 | 000000000 | 00000 |
| 2" | Partially Threaded | 3/4" | Coarse | 7/16" | 15/64" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 3" | Partially Threaded | 3/4" | Coarse | 7/16" | 15/64" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
5/16"-18 | |||||||||||
| 1" | Fully Threaded | __ | Coarse | 1/2" | 17/64" | Gray | 140° | Not Rated | 5 | 000000000 | 00000 |
| 1 1/4" | Partially Threaded | 1" | Coarse | 1/2" | 17/64" | Gray | 140° | Not Rated | 5 | 000000000 | 00000 |
| 1 1/2" | Partially Threaded | 1" | Coarse | 1/2" | 17/64" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 2" | Partially Threaded | 1" | Coarse | 1/2" | 17/64" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
3/8"-16 | |||||||||||
| 1/2" | Fully Threaded | __ | Coarse | 9/16" | 5/16" | Gray | 140° | Not Rated | 5 | 000000000 | 00000 |
| 1" | Fully Threaded | __ | Coarse | 9/16" | 5/16" | Gray | 140° | Not Rated | 5 | 000000000 | 00000 |
| 1 1/4" | Partially Threaded | 1" | Coarse | 9/16" | 5/16" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 1 1/2" | Partially Threaded | 1" | Coarse | 9/16" | 5/16" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 2" | Partially Threaded | 1" | Coarse | 9/16" | 5/16" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 3" | Partially Threaded | 1" | Coarse | 9/16" | 5/16" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
1/2"-13 | |||||||||||
| 1" | Fully Threaded | __ | Coarse | 3/4" | 13/32" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 1 1/2" | Partially Threaded | 1" | Coarse | 3/4" | 13/32" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 2" | Partially Threaded | 1 1/4" | Coarse | 3/4" | 13/32" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 3" | Partially Threaded | 1 1/2" | Coarse | 3/4" | 13/32" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 4" | Partially Threaded | 1 1/2" | Coarse | 3/4" | 13/32" | Gray | 140° | Not Rated | 1 | 000000000 | 00000 |
5/8"-11 | |||||||||||
| 1 1/2" | Fully Threaded | __ | Coarse | 7/8" | 31/64" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 2" | Partially Threaded | 1 1/2" | Coarse | 7/8" | 31/64" | Gray | 140° | Not Rated | 1 | 000000000 | 00000 |
| 3" | Partially Threaded | 1 1/2" | Coarse | 7/8" | 31/64" | Gray | 140° | Not Rated | 1 | 000000000 | 0000 |
| 4" | Partially Threaded | 1 1/2" | Coarse | 7/8" | 31/64" | Gray | 140° | Not Rated | 1 | 000000000 | 00000 |
Chemical-Resistant PVC Threaded Rods
PVC threaded rods resist acids, alkalies, salt solutions, and alcohol. They’re nonconductive, making them good for use around sensitive electrical components.
For technical drawings and 3-D models, click on a part number.
| Lg., ft. | Color | Tensile Strength | Hardness | Max. Temp., °F | Each | |
PVC Plastic | ||||||
|---|---|---|---|---|---|---|
1/4"-20 | ||||||
| 3 | Gray | Not Rated | Not Rated | 130°F | 000000000 | 000000 |
5/16"-18 | ||||||
| 3 | Gray | Not Rated | Not Rated | 130°F | 000000000 | 00000 |
3/8"-16 | ||||||
| 3 | Gray | Not Rated | Not Rated | 130°F | 000000000 | 00000 |
1/2"-13 | ||||||
| 3 | Gray | Not Rated | Not Rated | 130°F | 000000000 | 00000 |
5/8"-11 | ||||||
| 3 | Gray | Not Rated | Not Rated | 130°F | 000000000 | 00000 |
3/4"-10 | ||||||
| 3 | Gray | Not Rated | Not Rated | 130°F | 000000000 | 00000 |
High-Strength Twist-Resistant Plastic Anchors for Block and Brick
A lobed shape makes these anchors more twist and pull-out resistant than other plastic anchors for block and brick. They reinforce the hole and resist stripping. To install, drill a hole slightly deeper than the anchor is long and insert the anchor until it's flush with the surface. Next, thread a sheet metal or wood screw through your fixture and into the anchor. To determine screw length, add the anchor length to the fixture thickness and choose a screw longer than this. Pull-out strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | Lg. | Drill Bit Size | Color | Temperature Range, °F | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
PVC Plastic | |||||||||||
| No. 4 | 1" | 5/32" | Yellow | 0° to 120° | 40 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 00000 |
| No. 6 | 1" | 3/16" | White | 0° to 120° | 180 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 0000 |
| No. 8 | 1" | 15/64" | Red | 0° to 120° | 220 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 0000 |
| No. 10 | 1" | 1/4" | Green | 0° to 120° | 250 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 0000 |
| No. 10 | 1 1/2" | 1/4" | Green | 0° to 120° | 370 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 0000 |
| No. 10 | 2" | 1/4" | Green | 0° to 120° | 520 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 0000 |
| No. 14, 1/4" | 1" | 5/16" | Blue | 0° to 120° | 300 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 0000 |
| No. 14, 1/4" | 1 1/2" | 5/16" | Blue | 0° to 120° | 420 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 0000 |
| No. 14, 1/4" | 2" | 5/16" | Blue | 0° to 120° | 570 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 0000 |
| No. 16, 5/16" | 1 1/2" | 3/8" | Orange | 0° to 120° | 370 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 0000 |
| No. 16, 5/16" | 2 1/2" | 3/8" | Orange | 0° to 120° | 620 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 100 | 000000000 | 00000 |
| No. 20, 3/8" | 2" | 7/16" | Gray | 0° to 120° | 1,200 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 50 | 000000000 | 00000 |
| No. 20, 3/8" | 3" | 7/16" | Gray | 0° to 120° | 1,600 | Not Rated | 2,000 psi Concrete | Block, Brick, Concrete | 50 | 000000000 | 00000 |
High-Strength Twist-Resistant Plastic Anchors with Screw for Block and Brick
A lobed shape makes these anchors more twist and pull-out resistant than other plastic anchors for block and brick. They reinforce the hole and resist stripping. To install, drill a hole slightly deeper than the anchor is long and insert the anchor until it's flush with the surface. Next, thread a sheet metal or wood screw through your fixture and into the anchor. Pull-out strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Screw | Strength, lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Lg. | Drill Bit Size | Color | Temperature Range, °F | Pull-Out | Shear | Tested In | Drive Style | For Use In | Pkg. Qty. | Pkg. | |
PVC Plastic | |||||||||||||
| No. 6 | 1" | 1" | 3/16" | White | 0° to 120° | 180 | Not Rated | 2,000 psi Concrete | Slotted/Phillips | Block, Brick, Concrete | 100 | 000000000 | 00000 |
| No. 8 | 1" | 1" | 15/64" | Red | 0° to 120° | 270 | Not Rated | 2,000 psi Concrete | Slotted/Phillips | Block, Brick, Concrete | 100 | 000000000 | 00000 |
| No. 10 | 1" | 1" | 1/4" | Green | 0° to 120° | 250 | Not Rated | 2,000 psi Concrete | Slotted/Phillips | Block, Brick, Concrete | 100 | 000000000 | 00000 |
| No. 14 | 1 1/2" | 1 1/2" | 5/16" | Blue | 0° to 120° | 420 | Not Rated | 2,000 psi Concrete | Slotted/Phillips | Block, Brick, Concrete | 50 | 000000000 | 00000 |