PVDF (Schedule 80) Pipe | McMaster-Carr

Filter by

Material

Plastic

PVDF

Pipe Schedule

Pipe Size

Fitting Type

Threading

Threaded on Both Ends

Fitting Connection

Length

Color

Shape

Thread Type

Gender

Fitting Material

For Use With

Flange Material

Connects To

Maximum Temperature

System of Measurement

Pipe Material

REACH

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Minimum Temperature

Greater than 0° F

Not Rated

Maximum Pressure @ Temperature

Specifications Met

Flammability Rating

51 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

For Use With: Chlorine, Salt Water, Solvents
Max. Temperature: 280° F
Specifications Met: ASTM D3222, UL 94 V-0
Fittings: Use Schedule 80 PVDF Plastic
Flanges: Use Class 150 PVDF Plastic

Pipe meets UL 94 V-0 for flame retardance, so it delays the spread of flames to valuable equipment. It is PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Schedule 80 pipe, it has thick walls for heavy duty chemical processing applications. Pipe meets ASTM D3222 specifications and testing requirements for material quality.

Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.

Threaded on Both Ends

To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.

2"
Pipe Size	OD	ID	Wall Thick.	Material	Color	Max. Pressure		Each
NPT Threads
1/2	27/32"	0.546"	0.147"	PVDF Plastic	Red	290 psi @ 72° F	00000000	000000
3/4	1 3/64"	0.742"	0.154"	PVDF Plastic	Red	230 psi @ 72° F	00000000	00000
1	1 5/16"	0.957"	0.179"	PVDF Plastic	Red	210 psi @ 72° F	00000000	00000
1 1/2	1 29/32"	1.5"	0.2"	PVDF Plastic	Red	160 psi @ 72° F	00000000	00000
2	2 3/8"	1.939"	0.218"	PVDF Plastic	Red	140 psi @ 72° F	00000000	00000
4"
NPT Threads
1/2	27/32"	0.546"	0.147"	PVDF Plastic	Red	290 psi @ 72° F	00000000	00000
3/4	1 3/64"	0.742"	0.154"	PVDF Plastic	Red	230 psi @ 72° F	00000000	00000
1	1 5/16"	0.957"	0.179"	PVDF Plastic	Red	210 psi @ 72° F	00000000	00000
1 1/2	1 29/32"	1.5"	0.2"	PVDF Plastic	Red	160 psi @ 72° F	00000000	000000
2	2 3/8"	1.939"	0.218"	PVDF Plastic	Red	140 psi @ 72° F	00000000	000000

Non-Hardening Thread Sealant (8-oz. Brush-Top Can)

000000

Each

000000

Unthreaded

Connect unthreaded pipe to unthreaded female socket-connect fittings using a primer and cement (also known as solvent weld).

2 ft.
Pipe Size	OD	ID	Wall Thick.	Material	Color	Max. Pressure		Each
1/2	27/32"	0.546"	0.147"	PVDF Plastic	Red	290 psi @ 72° F	00000000	0000000
3/4	1 3/64"	0.742"	0.154"	PVDF Plastic	Red	230 psi @ 72° F	00000000	000000
1	1 5/16"	0.957"	0.179"	PVDF Plastic	Red	210 psi @ 72° F	00000000	000000
1 1/2	1 29/32"	1.5"	0.2"	PVDF Plastic	Red	160 psi @ 72° F	00000000	000000
2	2 3/8"	1.939"	0.218"	PVDF Plastic	Red	130 psi @ 72° F	00000000	000000
5 ft.
1/2	27/32"	0.546"	0.147"	PVDF Plastic	Red	290 psi @ 72° F	00000000	000000
3/4	1 3/64"	0.742"	0.154"	PVDF Plastic	Red	230 psi @ 72° F	00000000	000000
1	1 5/16"	0.957"	0.179"	PVDF Plastic	Red	210 psi @ 72° F	00000000	000000
1 1/2	1 29/32"	1.5"	0.2"	PVDF Plastic	Red	160 psi @ 72° F	00000000	000000
2	2 3/8"	1.939"	0.218"	PVDF Plastic	Red	130 psi @ 72° F	00000000	000000

Flame-Retardant PVDF Pipe Fittings for Chemicals

For Use With: Chlorine, Salt Water, Solvents
Temperature Range: 40° to 280° F
Specifications Met: ASTM D3222, UL 94 V-0
Pipe Nipples and Pipe: Use Schedule 80 PVDF Plastic
Flanges: Use Class 150 PVDF Plastic

These fittings meet UL 94 V-0 for flame retardance, so they delay the spread of flames to valuable equipment. They are made of PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Schedule 80 fittings, they have thick walls for heavy duty chemical processing applications. When connecting to pipe, apply a non-hardening, plastic-compatible sealant to the male threads to prevent leaks. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns. Fittings meet ASTM D3222 specifications and testing requirements for material quality.

Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

Straight Connectors, Female Threaded Pipe

NPT Threads
Pipe Size	Material	Color	Max. Pressure		Each
1/2	PVDF Plastic	Red	290 psi @ 72° F	00000000	000000
3/4	PVDF Plastic	Red	230 psi @ 72° F	00000000	00000
1	PVDF Plastic	Red	210 psi @ 72° F	00000000	00000
1 1/2	PVDF Plastic	Red	160 psi @ 72° F	00000000	000000
2	PVDF Plastic	Red	140 psi @ 72° F	00000000	000000

Non-Hardening Thread Sealant (8-oz. Brush-Top Can)

000000

Each

000000

Union Straight Connectors, Female Threaded Pipe

Unions separate into three pieces, so you can access your line without unthreading pipe connections.

NPT Threads
Pipe Size	Material	Color	O-Ring Material	Max. Pressure		Each
1/2	PVDF Plastic	Red	Viton® Fluoroelastomer Rubber	290 psi @ 72° F	00000000	0000000
3/4	PVDF Plastic	Red	Viton® Fluoroelastomer Rubber	230 psi @ 72° F	00000000	000000
1	PVDF Plastic	Red	Viton® Fluoroelastomer Rubber	210 psi @ 72° F	00000000	000000
1 1/2	PVDF Plastic	Red	Viton® Fluoroelastomer Rubber	160 psi @ 72° F	00000000	000000
2	PVDF Plastic	Red	Viton® Fluoroelastomer Rubber	140 psi @ 72° F	00000000	000000

Non-Hardening Thread Sealant (8-oz. Brush-Top Can)

000000

Each

000000

Straight Bushing Reducing Adapters, Male Threaded Pipe × Female Threaded Pipe

NPT Threads
Pipe Size (A)	Pipe Size (B)	Material	Color	Max. Pressure		Each
3/4	1/2	PVDF Plastic	Red	230 psi @ 72° F	00000000	000000
1	1/2	PVDF Plastic	Red	210 psi @ 72° F	00000000	00000
1	3/4	PVDF Plastic	Red	210 psi @ 72° F	00000000	00000
1 1/2	1	PVDF Plastic	Red	160 psi @ 72° F	00000000	00000
2	1 1/2	PVDF Plastic	Red	140 psi @ 72° F	00000000	000000

Non-Hardening Thread Sealant (8-oz. Brush-Top Can)

000000

Each

000000

90° Elbow Connectors, Female Threaded Pipe

NPT Threads
Pipe Size	Material	Color	Max. Pressure		Each
1/2	PVDF Plastic	Red	290 psi @ 72° F	00000000	000000
3/4	PVDF Plastic	Red	230 psi @ 72° F	00000000	00000
1	PVDF Plastic	Red	210 psi @ 72° F	00000000	000000
1 1/2	PVDF Plastic	Red	160 psi @ 72° F	00000000	000000
2	PVDF Plastic	Red	140 psi @ 72° F	00000000	000000

Non-Hardening Thread Sealant (8-oz. Brush-Top Can)

000000

Each

000000

Tee Connectors, Female Threaded Pipe

NPT Threads
Pipe Size	Material	Color	Max. Pressure		Each
1/2	PVDF Plastic	Red	290 psi @ 72° F	00000000	000000
3/4	PVDF Plastic	Red	230 psi @ 72° F	00000000	00000
1	PVDF Plastic	Red	210 psi @ 72° F	00000000	000000
1 1/2	PVDF Plastic	Red	160 psi @ 72° F	00000000	000000
2	PVDF Plastic	Red	140 psi @ 72° F	00000000	000000

Non-Hardening Thread Sealant (8-oz. Brush-Top Can)

000000

Each

000000

Flame-Retardant PVDF Pipe Flanges for Chemicals

Front

Flat Surface on Back

Raised Surface on Back

For Use With: Chlorine, Salt Water, Solvents
Temperature Range: 40° to 280° F
Specifications Met: ASTM D3222, UL 94 V-0
Pipe Nipples and Pipe: Use Schedule 80 PVDF Plastic
Fittings: Use Schedule 80 PVDF Plastic

Flanges meet UL 94 V-0 for flame retardance to delay the spread of flames to valuable equipment. They are made of PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Pressure Class 150 flanges, they have thick, strong walls for heavy duty chemical processing applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. When connecting to pipe, apply a non-hardening, plastic-compatible sealant to the male threads to prevent leaks. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the flange, then wrench-tighten one to two turns. Flanges meet ASTM D3222 specifications and testing requirements for material quality.

Warning: Never use plastic pipe flanges and pipe with compressed air or gas.

Fixed Flange, Female Threaded × Flanged
Pipe Size	Flanged Connection Surface	Flange OD	For Bolt Dia.	Bolt Hole Dia.	Number of Bolt Holes	Bolt Circle Dia.	Material	Color	Max. Pressure		Each
NPT Threads
1/2	Flat	3 1/2"	1/2"	5/8"	4	2 5/16"	PVDF Plastic	Red	150 psi @ 72° F	00000000	0000000
3/4	Flat	3 7/8"	1/2"	5/8"	4	2 11/16"	PVDF Plastic	Red	150 psi @ 72° F	00000000	000000
1	Flat	4 1/4"	1/2"	5/8"	4	3 1/32"	PVDF Plastic	Red	150 psi @ 72° F	00000000	000000
1 1/2	Flat	5"	1/2"	5/8"	4	3 3/4"	PVDF Plastic	Red	150 psi @ 72° F	00000000	000000
2	Raised	6"	5/8"	3/4"	4	4 3/4"	PVDF Plastic	Red	150 psi @ 72° F	00000000	000000

Non-Hardening Thread Sealant (8-oz. Brush-Top Can)

000000

Each

000000

Email Us

How to Identify and Measure Fittings

Flame-Retardant PVDF Pipe Nipples and Pipe for Chemicals

Flame-Retardant PVDF Pipe Fittings for Chemicals

Flame-Retardant PVDF Pipe Flanges for Chemicals