For Tube Material For Tube Material |
|---|
|
Sleeve Material Sleeve Material |
|---|
|
System of Measurement System of Measurement |
|---|
|
Connection Style Connection Style |
|---|
 |
| Compression |
 |
| Yor-Lok |
Shape Shape |
|---|
 | Straight |
Heat-Shrink Tubing Type Heat-Shrink Tubing Type |
|---|
 |  |
| Tubing | Assortments |
Maximum Temperature Maximum Temperature |
|---|
|
Performance Properties Performance Properties |
|---|
|
For Use With For Use With |
|---|
|
|
Connection Type Connection Type |
|---|
 | Tube |
Material Material |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Flexibility Flexibility |
|---|
 |  |
| Flexible | Semi-Rigid |
Compatible With Compatible With |
|---|
|
About Heat-Shrink Tubing
More
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
High-Strength Heat-Shrink Tubing
With excellent resistance to tears and cuts, this tubing withstands demanding use. It also resists chemicals.
PVDF tubing has an additive that makes it flame retardant, so it resists combustion and minimizes the spread of flames.
AMS/MIL-DTL-23053/8 and AMS/MIL-DTL-23053/11 tubing meets requirements for material quality.
Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
- Shrink Ratio: 2:1
- Dielectric Strength: 900 V/mil
- Shrink Temperature: 350° F
- Temperature Range: -65° to 345° F
- AMS/MIL-DTL-23053/8, CSA Certified, Flame Rated VW-1, UL Recognized
ID | ||||||
|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Pkg. Qty. | Pkg. | |
| 0.13" | 0.06" | 0.01" | Clear | 10 | 0000000 | 00000 |
| 0.25" | 0.13" | 0.01" | Clear | 10 | 0000000 | 00000 |
| 0.38" | 0.19" | 0.01" | Clear | 10 | 0000000 | 00000 |
| 0.5" | 0.25" | 0.01" | Clear | 10 | 0000000 | 00000 |
| 0.75" | 0.38" | 0.02" | Clear | 2 | 0000000 | 00000 |
| 1" | 0.5" | 0.02" | Clear | 1 | 0000000 | 00000 |
ID | |||||
|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | |
| 0.06" | 0.03" | 0.01" | Clear | 0000000 | 00000 |
| 0.13" | 0.06" | 0.01" | Clear | 0000000 | 0000 |
| 0.25" | 0.13" | 0.01" | Clear | 0000000 | 0000 |
| 0.38" | 0.19" | 0.01" | Clear | 0000000 | 00000 |
| 0.5" | 0.25" | 0.01" | Clear | 0000000 | 00000 |
| 0.75" | 0.38" | 0.02" | Clear | 0000000 | 00000 |
| 1" | 0.5" | 0.02" | Clear | 0000000 | 00000 |
Flame-Retardant Abrasion-Resistant Heat-Shrink Tubing
- Material: PVDF Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 400 V/mil
- Shrink Temperature: 305° F
- Temperature Range: -65° to 300° F
- AMS/MIL-DTL-23053/18 Class 2, Flame Rated VW-1, UL Recognized
Made of PVDF, this tubing has excellent cut and abrasion resistance. A flame-retardant additive makes it combustion resistant and minimizes the spread of flames. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Tubing meets AMS/MIL-DTL-23053/18 Class 2 for material quality and color.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
ID | ||||||
|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Choose a Color | Pkg. Qty. | Pkg. | |
| 0.19" | 0.09" | 0.01" | 5 | 0000000 | 00000 | |
| 0.25" | 0.13" | 0.01" | 5 | 0000000 | 0000 | |
| 0.38" | 0.19" | 0.01" | 5 | 0000000 | 0000 | |
| 0.5" | 0.25" | 0.01" | 5 | 0000000 | 0000 | |
| 0.75" | 0.38" | 0.02" | 5 | 0000000 | 00000 | |
| 1" | 0.5" | 0.02" | 1 | 0000000 | 0000 | |
Harsh Environment Heat-Shrink Tubing Assortments
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.
FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
PVDF resists abrasion, cuts, and tears.
| Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Colors Included | Each | |
| 0.05"-0.75" ID Before Shrinking of Polyolefin (41 pieces, 9 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 3 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 82 | 1/2ft. | 2:1, 2.5:1 | 195° to 340° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 0000000 |
| 0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 181 | 1", 1/2ft. | 1.2:1, 1.5:1, 2:1, 2.5:1, 3:1 | 195° to 485° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 000000 |
| 0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6sizes) 0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes) 0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each) | 112 | 1/2ft. | 1.2:1, 2:1, 2.5:1, 3:1 | 195° to 395° | Black, Blue, Brown, Clear, Gray, Green, Green with Yellow Stripe, Red, White, Yellow | 00000000 | 000000 |
| 0.13"-1" ID Before Shrinking of Polyolefin (22 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive (31 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of PVDF (20 pieces, 7 sizes) | 73 | 1/2ft. | 2:1, 3:1 | 250° | Black, Clear, Red | 0000000 | 000000 |
| 0.13"-0.5" ID Before Shrinking of Polyolefin with Adhesive Lining (5 sizes) 0.13"-0.5" ID Before Shrinking of PVC (5 sizes) 0.13"-0.5" ID Before Shrinking of PVDF (5 sizes) | 150 | 1/2ft. | 2:1 | 195° to 350° | Black, Clear | 000000 | 000000 |
PTFE Sleeves for Yor-Lok Fittings
- For Use With: Air, Cutting Oil, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -65° to 350° F
- Tubing: Use with firm or hard acetal plastic, EVA plastic, HDPE plastic, nylon plastic, PEEK plastic, polycarbonate plastic, polyethylene plastic, polypropylene plastic, PTFE plastic, PVC plastic, PVDF plastic, or THV plastic
- Compatible With: Let-Lok, Parker A-Lok, Swagelok®
Made of plastic, these sleeves create a strong seal without damaging tubing.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Sleeve Material | Each | |
| 1/16" | PTFE Plastic | 00000000 | 000000 |
| 1/8" | PTFE Plastic | 00000000 | 0000 |
| 3/16" | PTFE Plastic | 00000000 | 0000 |
| 1/4" | PTFE Plastic | 00000000 | 0000 |
| 5/16" | PTFE Plastic | 00000000 | 0000 |
| 3/8" | PTFE Plastic | 00000000 | 0000 |
| 1/2" | PTFE Plastic | 00000000 | 0000 |
| 5/8" | PTFE Plastic | 00000000 | 00000 |
| 3/4" | PTFE Plastic | 00000000 | 00000 |
| 1" | PTFE Plastic | 00000000 | 00000 |
Nuts with Built-In Sleeve for High-Temperature
Compression Tube Fittings for Food and Beverage
- Temperature Range: -40° to 270° F
- Tubing: Use with firm or hard (Durometer 45D-65D) nylon plastic, polyethylene plastic, or polypropylene plastic
- Specifications Met: Made of FDA Listed Materials
Use these nuts with high-temperature compression fittings for food and beverage to create a seal on plastic tubing. They have a built-in sleeve (ferrule), so the sleeve is positioned correctly for installation. Thread the nut onto the fitting, then insert the tubing and tighten the nut. Nuts are PVDF (also known as Kynar), which has excellent strength and can handle high temperatures up to 270° F.
For technical drawings and 3-D models, click on a part number.
Nut | Sleeve | ||||||
|---|---|---|---|---|---|---|---|
| For Tube OD | Material | Color | Material | Color | Max. Pressure | Each | |
| 1/8" | PVDF Plastic | White | PVDF Plastic | White | 50 psi @ 72° F | 00000000 | 00000 |
| 1/4" | PVDF Plastic | White | PVDF Plastic | White | 50 psi @ 72° F | 00000000 | 0000 |
| 5/16" | PVDF Plastic | White | PVDF Plastic | White | 50 psi @ 72° F | 00000000 | 0000 |
| 3/8" | PVDF Plastic | White | PVDF Plastic | White | 50 psi @ 72° F | 00000000 | 0000 |
| 1/2" | PVDF Plastic | White | PVDF Plastic | White | 50 psi @ 72° F | 00000000 | 0000 |