Material Material |
|---|
|
|
Shape Shape |
|---|
 |  |
| Rod and Disc | Sheet and Bar |
 |  |
| Film | Wire |
Performance Properties Performance Properties |
|---|
|
Flexibility Flexibility |
|---|
 | Semi- Flexible |
 | Semi-Rigid |
For Use With For Use With |
|---|
Clarity Clarity |
|---|
 |
| Semi-Clear |
 |
| Opaque |
Hardness Rating Hardness Rating |
|---|
|
Specifications Met Specifications Met |
|---|
|
Density Density |
|---|
|
Flexural Modulus Flexural Modulus |
|---|
|
Dielectric Strength Dielectric Strength |
|---|
|
About Plastic and Rubber Tubing
More
About Plastic
More
High-Strength PVDF Rods
- Color: White
- Temperature Range: -25° to 265° F
- Tensile Strength: 6,100-7,800 psi (Good)
- Impact Strength: 1.97-4 ft.-lbs./in. (Poor)
- Hardness: Rockwell M79 (Hard)
- For Use Outdoors: Yes
- Specifications Met: UL 94V0, Made of FDA Listed Material
Use these rods for semiconductor components, as well as pump parts and seals. They’re made of PVDF, a strong, chemical-resistant material that’s comparable to Kynar and Solef.
High-Strength PVDF Sheets
- Color: White
- Temperature Range: -25° to 265° F
- Tensile Strength: 6,100-7,800 psi (Good)
- Impact Strength: 1.97-4 ft.-lbs./in. (Poor)
- Hardness: Rockwell M79 (Hard)
- For Use Outdoors: Yes
- Specifications Met: UL 94V0, Made of FDA Listed Material
Because of their high strength and good chemical resistance, these sheets are often fabricated into semiconductor components, as well as pump parts, tank liners, and seals. PVDF is comparable to Kynar and Solef.
For technical drawings and 3-D models, click on a part number.
6" × 6" | 12" × 12" | ||||
|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Each | Each | ||
| 1/4" | 0" to 0.025" | 00000000 | 000000 | 00000000 | 000000 |
| 3/8" | 0" to 0.025" | 00000000 | 00000 | 00000000 | 000000 |
| 1/2" | 0" to 0.025" | 00000000 | 00000 | 00000000 | 000000 |
| 3/4" | 0" to 0.025" | 00000000 | 00000 | 00000000 | 000000 |
| 1" | 0" to 0.025" | 00000000 | 00000 | 00000000 | 000000 |
| 1 1/2" | 0" to 0.025" | 00000000 | 000000 | 00000000 | 000000 |
High-Strength PVDF Film
- Color: Semi-Clear White
- Temperature Range: -25° to 265° F
- Tensile Strength: 6,100-7,800 psi (Good)
- Impact Strength: 1.97-4 ft.-lbs./in. (Poor)
- Hardness: Rockwell M79 (Hard)
- For Use Outdoors: Yes
- Specifications Met: UL 94VTM0
Comparable to Kynar and Solef, this strong, chemical-resistant film is often used as tank liners and seals.
Abrasion-Resistant Hard Plastic Tubing for Chemicals
This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals. It can withstand a variety of acids and other harsh substances. Tubing is semi-clear, so you get a limited view inside the line. It is semi-flexible, so it’s good for gradual bends.
PVDF tubing is the most economical option. It is also known as Kynar.
Tubing that meets UL 94V0 is flame retardant, so it delays the spread of flames to valuable equipment.
For technical drawings and 3-D models, click on a part number.
- Semi-Flexible
- Compatible with Compression Tube Fittings
- Hardness Rating:
Inch: Hard (Durometer 75D)
Metric: Hard (Durometer 65D) - Temperature Range: -40° to 250° F
| ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Color | Lengths, ft. | Specifications Met | Per Ft. | |
Inch | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 1/4" | 1/16" | 1" | 350 psi @ 72° F | White | UL 94V0 | 00000000 | 00000 | |
| 11/64" | 1/4" | 3/64" | 1 1/4" | 180 psi @ 72° F | White | UL 94V0 | 00000000 | 0000 | |
| 3/16" | 5/16" | 1/16" | 1 1/4" | 290 psi @ 72° F | White | UL 94V0 | 00000000 | 0000 | |
| 1/4" | 3/8" | 1/16" | 1 1/2" | 240 psi @ 72° F | White | UL 94V0 | 00000000 | 0000 | |
| 5/16" | 7/16" | 1/16" | 1 1/2" | 200 psi @ 72° F | White | UL 94V0 | 00000000 | 0000 | |
| 3/8" | 1/2" | 1/16" | 1 3/4" | 180 psi @ 72° F | White | UL 94V0 | 00000000 | 0000 | |
| 1/2" | 5/8" | 1/16" | 2 1/2" | 140 psi @ 72° F | White | UL 94V0 | 00000000 | 0000 | |
| 5/8" | 3/4" | 1/16" | 3 1/2" | 120 psi @ 72° F | White | UL 94V0 | 00000000 | 0000 | |
| 3/4" | 7/8" | 1/16" | 5" | 100 psi @ 72° F | White | UL 94V0 | 00000000 | 0000 | |
| 7/8" | 1" | 1/16" | 7 1/2" | 90 psi @ 72° F | White | UL 94V0 | 00000000 | 0000 | |
Metric | |||||||||
| 2mm | 4mm | 1mm | 19mm | 430 psi @ 72° F | White | __ | 00000000 | 0000 | |
| 4mm | 6mm | 1mm | 25mm | 210 psi @ 72° F | White | __ | 00000000 | 0000 | |
| 6mm | 8mm | 1mm | 50mm | 140 psi @ 72° F | White | __ | 00000000 | 0000 | |
| 8mm | 10mm | 1mm | 76mm | 100 psi @ 72° F | White | __ | 00000000 | 0000 | |
| 10mm | 12mm | 1mm | 107mm | 85 psi @ 72° F | White | __ | 00000000 | 0000 | |
Semi-Flexible Hard Plastic Tubing
for Food, Beverage, and Dairy
- Semi-Flexible
- Compatible with Compression Tube Fittings
- Hard (Durometer 60D)
- Temperature Range: -40° to 212° F
- Specifications Met: FDA Compliant 21 CFR 177.2600, NSF/ANSI 51, NSF/ANSI 61, NSF/ANSI 372
Strong, yet pliable, this PVDF tubing is good for gradual bends and can handle repeated flexing. It is also known as Kynar. Suitable for use with food and beverage, it is made of FDA listed materials and meets NSF/ANSI 51 for food contact. Tubing also meets both NSF/ANSI 61 and NSF/ANSI 372 for use with drinking water systems. Tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through it. It is semi-clear, so you get a limited view inside the line.
| ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Max. Vacuum | Color | Lengths, ft. | Per Ft. | |
Semi-Clear PVDF Plastic | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Inch Tubing | |||||||||
| 1/8" | 1/4" | 1/16" | 1/2" | 260 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 00000 | |
| 11/64" | 1/4" | 3/64" | 1" | 150 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 3/16" | 5/16" | 1/16" | 1" | 210 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 1/4" | 3/8" | 1/16" | 1" | 170 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 5/16" | 7/16" | 1/16" | 1 3/4" | 150 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 3/8" | 1/2" | 1/16" | 2" | 130 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 1/2" | 5/8" | 1/16" | 3" | 100 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 5/8" | 3/4" | 1/16" | 5" | 90 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 3/4" | 7/8" | 1/16" | 15" | 70 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 00000 | |
| 7/8" | 1" | 1/16" | 16" | 65 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 00000 | |
Metric Tubing | |||||||||
| 2mm | 4mm | 1mm | 19mm | 460 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 4mm | 6mm | 1mm | 25mm | 310 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 6mm | 8mm | 1mm | 38mm | 230 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 8mm | 10mm | 1mm | 63mm | 260 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 10mm | 12mm | 1mm | 102mm | 150 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 12mm | 14mm | 1mm | 127mm | 130 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
| 14mm | 16mm | 1mm | 152mm | 115 psi @ 72° F | 28 in. of Hg @ 72° F | White | 0000000 | 0000 | |
Plastic and Rubber Tubing Material Sample Packs
These packs include individually marked pieces of tubing in a variety of materials.
| Includes | Pkg. Qty. | Pkg. | |
| One 3" long piece each of nylon, PTFE, PVDF, and PEEK tubing | 4 | 000000 | 000000 |
High-Temperature 3D Printer Filaments
Parts made with these filaments remain strong and rigid in temperatures that would soften most plastics. They are a lightweight alternative to machined metal parts. Use with a fused filament fabrication (FFF) 3D printer to make parts that will be used near ovens, engines, and other hot machinery. These filaments require an all-metal extruder to reach the recommended printing temperatures. Print parts onto a heated bed to keep them from warping as they cool.
PVDF, also known as Kynar, is the most wear-resistant high-temperature material. Parts made from these filaments also hold up when exposed to UV rays.
Tensile strength is the best measure of a filament's overall strength. Similar to the stress applied on a rope during a game of tug-of-war, it's the amount of pulling force a material can handle before breaking. A higher rating means a stronger filament. A tensile strength of 5,000 psi and above is considered good; 12,000 psi and above is excellent.
Maximum exposure temperature is the point at which a printed part will begin to deform. Above this temperature, your printed parts will start to lose structural integrity.
Spool | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia., mm | Printing Temp. | For Printer Bed Temp. | Tensile Strength | Max. Exposure Temp. | For Min. Nozzle Dia., mm | Dia., mm | Dp., mm | Wt., g | Color | Each | |
PVDF Plastic | |||||||||||
| 1.75 | 245° to 265° C 473° to 509° F | 90° to 110° C 194° to 230° F | 7,390 psi (Good) | 158° C 316° F | 0.4 | 195 | 40 | 500 | Opaque White | 0000000 | 0000000 |
| 2.85 | 245° to 265° C 473° to 509° F | 90° to 110° C 194° to 230° F | 7,390 psi (Good) | 158° C 316° F | 0.4 | 195 | 40 | 500 | Opaque White | 0000000 | 000000 |